2004-2009 Hyundai Tucson SUV FEATURES OF YOUR HYUNDAI -> SEAT BELTS User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

FEATURES OF YOUR HYUNDAI -> SEAT BELTS for Your Hyundai Tucson SUV First Generation (2004-2009)

1
FEATURES OF YOUR HYUNDAI
23
SEAT BELTS
B150A02A-GAT
SEAT BELT PRECAUTIONS
All occupants of the vehicle should
wear their seat belts at all times. In-
deed, your province's laws may re-
quire that some or all occupants of the
vehicle use seat belts.
The possibility of injury or the severity
of injury in an accident will be de-
creased if this elementary safety pre-
caution is observed. In addition, follow
the other instructions provided in this
section.
OJM019032
B140A01B-GAT
REAR SEAT WARNING
For the safety of all passengers, lug-
gage or other cargo should not be piled
higher than the top of the seatback.
B150B01Y-GAT
Infant or Small Child
Some countries require the use of
child restraint systems for infants and
small children. Whether this is required
by law or not, it is strongly recom-
mended that a child restraint seat or
infant restraint system be used for
infants or small children weighing less
than 18 kilograms (40 pounds).
NOTE:
Small children are best protected in
an accident when properly restrained
by a child restraint system.
1
FEATURES OF YOUR HYUNDAI
24
B150F01A-AAT
One Person Per Belt
Two people (including children) should
never attempt to use a single seat belt.
This could increase the severity of
injuries in case of an accident.
B150G01A-AAT
Do Not Lie Down
To reduce the chance of injuries in the
event of an accident and to achieve
maximum effectiveness of the restraint
system, all passengers should be sit-
ting up and the front seats should be in
an upright position when the car is
moving. A seat belt cannot operate
properly if the person is lying down in
the rear seat or if the front seat is in a
reclined position.
B150C01A-AAT
Larger Children
Children who are too large for child
restraint systems should always oc-
cupy the rear seat and use the avail-
able lap/shoulder belts. The lap por-
tion should be fastened snug on the
hips and as low as possible. Check
belt fit periodically. A child's squirming
could move the belt out of position. If
the larger child (over age 13) is in the
front seat, the child should be securely
restrained by the seat belt. Under no
circumstances should the child be al-
lowed to stand or kneel on the seat.
Children are afforded the most safety
in the event of an accident when they
are restrained by a proper restraint
system in the rear seat. NEVER place
a child under the age of 13 in the front
seat. Never allow children to ride in the
front passenger seat.
B150D01A-AAT
Pregnant Women
The use of a seat belt is recommended
for pregnant women to lessen the
chance of injury in an accident. When
a seat belt is used, the lap belt portion
should be placed as low and snugly as
possible on the hips, not across the
abdomen. For specific recommenda-
tions, consult a physician.
B150E01A-AAT
Injured Person
A seat belt should be used when an
injured person is being transported.
When this is necessary, you should
consult a physician for recommenda-
tions.
1
FEATURES OF YOUR HYUNDAI
25
B160B01A-AAT
Periodic Inspection
It is recommended that all seat belts
be inspected periodically for wear or
damage of any kind. Parts of the sys-
tem that are damaged should be re-
placed as soon as possible.
B160A01A-AAT
CARE OF SEAT BELTS
Seat belt systems should never be
disassembled or modified. In addition,
care should be taken to assure that
seat belts and belt hardware are not
damaged by seat hinges, doors or
other abuse.
!
WARNING:
When you return the rear seatback
to its upright position after the rear
seatback was folded down, be care-
ful not to damage the seat belt web-
bing or buckle. Be sure that the
webbing or buckle does not get
caught or pinched in the rear seat.
!
WARNING:
Sitting in a reclined position or ly-
ing down when your vehicle is in
motion can be dangerous. Even if
you buckle up, your seat belts can't
do their job when you're reclined.
The shoulder belt can't do its job
because it won't be against your
body. Instead, it will be in front of
you. In a crash you could go into it
with great force, receiving serious
neck or other injuries.
The lap belt can't do its job either. In
a crash the belt could go up over
your abdomen. The belt forces
would be applied there, not at your
strong pelvic bones.
This could cause serious internal
injuries.
For proper protection when the ve-
hicle is in motion, have the seatback
upright. Then sit well back in the
seat and wear your seat belt prop-
erly.
B160D01A-AAT
When to Replace Seat Belts
The entire seat belt assembly or as-
semblies should be replaced if the
vehicle has been involved in an acci-
dent. This should be done even if no
damage is visible. Additional ques-
tions concerning seat belt operation
should be directed to your Hyundai
Dealer.
B160C01A-AAT
Keep Belts Clean and Dry
Seat belts should be kept clean and
dry. If belts become dirty, they can be
cleaned by using a mild soap solution
and warm water. Bleach, dye, strong
detergents or abrasives should not be
used because they may damage and
weaken the fabric.
1
FEATURES OF YOUR HYUNDAI
26
B180A02A-GAT
SEAT BELTS 3-Point System
with Webbing Clamp Locking
Retractor (If installed)
To Fasten Your Belt
To fasten your seat belt, pull it out of the
retractor and insert the metal tab into
the buckle. There will be an audible
"click" when the tab locks into the
buckle.
The seat belt automatically adjusts to
the proper length only after the lap belt
is adjusted manually so that it fits
snugly around your hips. If you lean
forward in a slow, easy motion, the belt
will extend and let you move around. If
there is a sudden stop or impact, how-
ever, the belt will lock into position.
B180A01L
You can adjust the height of the shoul-
der belt anchor to one of the 4 positions
for maximum comfort and safety.
If the height of the adjusting seat belt is
too near your neck, you will not be
getting the most effective protection.
The shoulder portion should be ad-
justed so that it lies across your chest
and midway over your shoulder near-
est the door and not your neck.
HJM2050
B170A04A-AAT
HEIGHT ADJUSTABLE FRONT
SEAT SHOULDER BELT
!
To adjust the height of the seat belt
anchor, lower or raise the height ad-
juster into an appropriate position. To
raise the height adjuster, pull it up. To
lower it, push it down while pressing
the height adjuster button.
Release the button to lock the anchor
into position. Try sliding the height
adjuster to make sure that it has locked
into the position.
WARNING:
o The height adjuster must be in
the locked position when the
vehicle is moving.
o The misadjustment of height of
the shoulder belt could reduce
the effectiveness of the seat belt
in a crash.
1
FEATURES OF YOUR HYUNDAI
27
The seat belt automatically adjusts to
the proper length only after the lap belt
is adjusted manually so that it fits
snugly around your hips. If you lean
forward in a slow, easy motion, the belt
will extend and let you move around. If
there is a sudden stop or impact, how-
ever, the belt will lock into position. It
will also lock if you try to lean forward
too quickly. Check to make sure that
the belt is properly locked and that the
belt is not twisted.
NOTE:
If you are not able to pull out the
safety belt from the retractor, firmly
pull the belt out and release it. Then
you will be able to pull the belt out
smoothly.
It will also lock if you try to lean forward
too quickly. Check to make sure that
the belt is properly locked and that the
belt is not twisted.
B180A02Y-GAT
SEAT BELTS 3-Point System
with Emergency Locking Retrac-
tor (If installed)
To Fasten Your Belt
To fasten your seat belt, pull it out of the
retractor and insert the metal tab into
the buckle. There will be an audible
"click" when the tab locks into the
buckle.
B180A01L
B200A01S-GAT
Adjusting Your Seat Belt
You should place the belt as low as
possible on your hips, not on your
waist. If the belt is located too high on
your body, you could slide under it in
case of accident or a sudden stop.
This could result of death, serious
injury or property damage. Both arms
should not be under or over the belt.
Rather, one should be over and the
other under, as shown in the illustra-
tion.
Never wear the seat belt under the arm
nearest the door.
B200A01L
1
FEATURES OF YOUR HYUNDAI
28
Shorten
HTB226
Too
high
Correct
B220B01A-AAT
Adjusting Your Seat Belt
With a 2-point static type seat belt, the
length must be adjusted manually so it
fits snugly around your body. Fasten
the belt and pull on the loose end to
tighten. The belt should be placed as
low as possible on your hips, not on
your waist. If the belt is too high, it
could increase the possibility of your
being injured in an accident.
B210A01A-AAT
To Release the Seat Belt
The seat belt is released by pressing
the release button in the locking buckle.
When it is released, the belt should
automatically draw back into the re-
tractor.
If this does not happen, check the belt
to be sure it is not twisted, then try
again.
B210A01L
B220A01A-AAT
SEAT BELTS (2-Point Static
Type) (Rear Seat Center)
To Fasten Your Seat Belt
To fasten a 2-point static type belt,
insert the metal tab into the locking
buckle. There will be an audible "click"
when the tab locks into the buckle.
Check to make sure the belt is properly
locked and that the belt is not twisted.
HTB225
1
FEATURES OF YOUR HYUNDAI
29
(d)
B220A01JM-GAT
SEAT BELTS - Rear Seat
Center's 3-Point System With
Emergency Locking Retractor
(If installed)
1. Before fastening the rear seat center
belt, confirm the metal tab (a) and
buckle (b) are latched together.
2. After confirming that (a) and (b) are
latched, pull the seat belt out of the
retractor and insert the metal tab (c)
into the buckle (d).
B220A01JM-C
(a)
(b)
(c)
(a)
(b)
!
B220C01A-AAT
To Release the Seat Belt
When you want to release the seat
belt, press the button in the locking
buckle.
HJM2051
WARNING:
The center lap belt latching mecha-
nism is different from those for the
rear seat shoulder belts. When fas-
tening the rear seat shoulder belts
or the center lap belt, make sure
they are inserted into the correct
buckles to obtain maximum protec-
tion from the seat belt system and
assure proper operation.
There will be an audible "click" when the
tab locks in the buckle. The seat belt
automatically adjusts to the proper length
only after the lap belt is adjusted manu-
ally so that it fits snugly around your
hips. If you lean forward in a slow, easy
motion, the belt will extend and let you
move around. If there is a sudden stop
or impact, the belt will lock into position.
It will also lock if you try to lean forward
too quickly.
B220A02Y
1
FEATURES OF YOUR HYUNDAI
30
!
B220C01Y-GAT
To Release the Seat Belt
(If installed)
When you want to release the seat belt,
press the button in the locking buckle.
WARNING:
The center belt latching mechanism
is different from those for the rear
seat shoulder belts. When fasten-
ing the rear seat shoulder belts or
the rear seat center belt, make sure
they are inserted into the correct
buckles to obtain maximum protec-
tion from the seat belt system and
assure proper operation.
B220C01JM
WARNING:
o When using the rear seat center
belt, you must lock all metal tabs
and buckles. If any metal tab or
buckle is not locked, it will in-
crease the chance of injury in the
event of collision.
o Never unlock the metal tab (a)
and the buckle (b) with the fol-
lowing exceptions.
(1)In case of folding rear
seatbacks down.
(2)If transporting an object on
the rear seat may cause dam-
age to the rear seat center
belt.
!
B220A02JM
o In case of unlocking metal tab (a)
and the buckle (b), place metal
(a) in the seat belt clip not to
make noise while driving.
o Lock the metal tab (a) and the
buckle (b) immediately after fold-
ing rear seatbacks up.

Related Topics

Popular Owner Manuals