1
FEATURES OF YOUR HYUNDAI
63
To flash the headlights, pull the switch
lever toward you, then release it. The
headlights can be flashed even though
the headlight switch is in the "OFF"
position.
Parking light auto cut
o The purpose of this feature is to
prevent the battery from being dis-
charged.
The system automatically turns off
the headlights and parking lights when
the driver removes the ignition key
and opens the driver- side door.
o With this feature, the parking light
will be turned off automatically if the
driver parks on the side of road at
night.
If necessary, to keep the lights on
when the ignition key is removed,
perform the following :
1) Open the driver-side door.
2) Turn the parking lights OFF and
ON again using the light switch on
the steering column.
B340D01A-AAT
High-beam Switch
To turn on the headlight high beams,
push the lever forward (away from
you). The High Beam Indicator Light
will come on at the same time. For low
beams, pull the lever back toward you.
B340F01MC-GAT
Daytime Running Lights
(If Installed)
Your Hyundai is equipped with daytime
running lights. The daytime running
lights are used to improve visibility for
oncoming traffic. Your vehicle daytime
running lights are designed to remain on
continuously when the engine is operat-
ing even though the headlight switch is
in the "OFF" position. If you turn on the
tail lights when the ignition switch is in
the "ON" position, the daytime running
lights will go off.
B340E01A-AAT
Headlight Flasher
OJM019027
English 
