AIR CLEANER FILTER
WIPER BLADES
WINDSHIELD WIPER BLADES
Cleaning
If the windshield does not become clear after using the
windshield washer or if the wiper blades chatter when
operating the windshield wipers, wax or other materials
may be on the windshield and/or wiper blades.
Clean the outside of the windshield surface with a
washer solution or mild detergent. Your windshield is
clean if beads do not form when rinsing with water.
SDI2667
Clean the blade by wiping it with a cloth soaked in a
washer solution or a mild detergent. Rinse the blade
with water. If your windshield is still not clear after
cleaning the blades and using the wipers, replace the
blades.
WARNING:
Operating the engine with the air cleaner filter
off can cause you or others to be burned. The air
cleaner filter not only cleans the intake air, it
also stops flame if the engine backfires. If the air
cleaner filter is not installed and the engine
backfires, you could be burned. Never drive with
the air cleaner filter off. Be cautious working on
the engine when the air cleaner filter is off.
1
To remove the filter, pull the air duct
upward to
*
JVM0501X
2
3
*
remove it. Pull the tabs
upward.
, then pull the cover
*
A
*
Be careful not to clog the washer nozzle
. This may
cause improper windshield washer operation. If the
nozzle is clogged, remove any objects with a needle or
The viscous paper type filter element should not be
cleaned and reused. The dry paper type filter element
may be cleaned and reused. Replace the air filter
according to the maintenance log shown in a separate
maintenance booklet.
B
small pin
. Be careful not to damage the nozzle.
*
When replacing the air filter, wipe the inside of the air
cleaner housing and the cover with a damp cloth.
Maintenance and do-it-yourself 8-13
English 
