Get Maintenance and do-it-yourself -> Wiper blades Guide for Nissan Juke SUV First Generation (2010-2019)

AIR CLEANER FILTER

WIPER BLADES

WINDSHIELD WIPER BLADES

Cleaning

If the windshield does not become clear after using the

windshield washer or if the wiper blades chatter when

operating the windshield wipers, wax or other materials

may be on the windshield and/or wiper blades.

Clean the outside of the windshield surface with a

washer solution or mild detergent. Your windshield is

clean if beads do not form when rinsing with water.

SDI2667

Clean the blade by wiping it with a cloth soaked in a

washer solution or a mild detergent. Rinse the blade

with water. If your windshield is still not clear after

cleaning the blades and using the wipers, replace the

blades.

WARNING:

Operating the engine with the air cleaner filter

off can cause you or others to be burned. The air

cleaner filter not only cleans the intake air, it

also stops flame if the engine backfires. If the air

cleaner filter is not installed and the engine

backfires, you could be burned. Never drive with

the air cleaner filter off. Be cautious working on

the engine when the air cleaner filter is off.

To remove the filter, pull the air duct

upward to

JVM0501X

remove it. Pull the tabs

upward.

, then pull the cover

Be careful not to clog the washer nozzle

. This may

cause improper windshield washer operation. If the

nozzle is clogged, remove any objects with a needle or

The viscous paper type filter element should not be

cleaned and reused. The dry paper type filter element

may be cleaned and reused. Replace the air filter

according to the maintenance log shown in a separate

maintenance booklet.

small pin

. Be careful not to damage the nozzle.

When replacing the air filter, wipe the inside of the air

cleaner housing and the cover with a damp cloth.

Maintenance and do-it-yourself 8-13

WINDOW WASHER FLUID

Replacing

SDI2475

SDI1649

WARNING:

Replace the wiper blades if they are worn.

REAR WINDOW WIPER BLADE

Contact a NISSAN dealer if checking or replacement

is required.

Anti-freeze is poisonous and should be stored

carefully in marked containers out of the reach

of children.

Before replacing the wiper blades, the wiper should be

in the fully up position to avoid scratching the engine

hood or damaging the wiper arm. To pull up the wiper

arm, see “Wiper and washer switch” (P.2-27).

To check the fluid level, use your finger to plug the

center hole

of the cap/tube assembly, then remove

1. Lift the wiper arm away from the windshield.

it from the reservoir.

2. Push and hold the release tab

, and then move

If there is no fluid in the tube, add fluid.

the wiper blade down the wiper arm to remove

Add a washer solvent to the water for better cleaning.

In the winter season, add a windshield washer anti-

freeze. Follow the manufacturer’s instructions for the

mixture ratio.

3. Remove the wiper blade.

4. Insert the new wiper blade onto the wiper arm until

it clicks into place.

CAUTION:

After wiper blade replacement, return the

wiper arm to its original position. Otherwise

the wiper arm or the engine hood may be

scratched and may cause damage when the

engine hood is opened.

Worn wiper blades can damage the wind-

shield and impair driver vision.

8-14 Maintenance and do-it-yourself

Maintenance and do-it-yourself -> Wiper blades for Your Nissan Juke SUV First Generation (2010-2019)

Related Topics

Popular Owner Manuals

Latest Owner Manuals