WINDOW WASHER FLUID
Replacing
SDI2475
SDI1649
WARNING:
Replace the wiper blades if they are worn.
REAR WINDOW WIPER BLADE
Contact a NISSAN dealer if checking or replacement
is required.
Anti-freeze is poisonous and should be stored
carefully in marked containers out of the reach
of children.
Before replacing the wiper blades, the wiper should be
in the fully up position to avoid scratching the engine
hood or damaging the wiper arm. To pull up the wiper
arm, see “Wiper and washer switch” (P.2-27).
To check the fluid level, use your finger to plug the
1
center hole
of the cap/tube assembly, then remove
*
1. Lift the wiper arm away from the windshield.
it from the reservoir.
A
*
2. Push and hold the release tab
, and then move
If there is no fluid in the tube, add fluid.
the wiper blade down the wiper arm to remove
1
.
*
Add a washer solvent to the water for better cleaning.
In the winter season, add a windshield washer anti-
freeze. Follow the manufacturer’s instructions for the
mixture ratio.
3. Remove the wiper blade.
4. Insert the new wiper blade onto the wiper arm until
it clicks into place.
CAUTION:
.
.
After wiper blade replacement, return the
wiper arm to its original position. Otherwise
the wiper arm or the engine hood may be
scratched and may cause damage when the
engine hood is opened.
Worn wiper blades can damage the wind-
shield and impair driver vision.
8-14 Maintenance and do-it-yourself
English 
