VARIABLE VOLTAGE CONTROL
SYSTEM (if equipped)
FUSES
ENGINE COMPARTMENT
CAUTION:
.
.
Do not ground accessories directly to the
battery terminal. Doing so will bypass the
variable voltage control system and the
vehicle battery may not charge completely.
Use electrical accessories with the engine
running to avoid discharging the vehicle
battery.
Your vehicle is equipped with a variable voltage control
system. This system measures the amount of electrical
discharge from the battery and controls voltage
generated by the alternator.
SDI1754
6. Remove the fuse using the fuse puller located in
the passenger compartment.
SDI2654
A
7. If the fuse is open
, replace it with a new fuse
*
CAUTION:
B
.
*
Never use a fuse of a higher or lower amperage
rating than that specified on the fuse box cover.
This could damage the electrical system or
cause a fire.
If the new fuse also opens, after installing, have the
electrical system checked, and if necessary repaired,
by a NISSAN dealer.
4
*
The holder
also contains the fuses. For checking
and/or replacing, see a NISSAN dealer.
If any electrical equipment does not operate, check for
an open fuse.
Fusible links
1. Be sure the ignition switch is in the “OFF”
position.
2. Be sure the headlight switch is in the “OFF”
position.
3. Open the engine hood.
4. Remove the fuse/fusible link box cover by pushing
1
the tab
2
*
and lifting the cover from the right side
*
3
, then the left side
.
*
5. Locate the fuse that needs to be replaced.
SDI2642
If any electrical equipment does not operate and the
fuses are in good condition, check the fusible links in
8-18 Maintenance and do-it-yourself
English 
