2010-2019 Nissan Juke SUV Maintenance and do-it-yourself -> Brakes User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance and do-it-yourself -> Brakes for Your Nissan Juke SUV First Generation (2010-2019)

BRAKES  
Proper brake inspection intervals should be followed.  
For additional information, see a separate maintenance  
booklet.  
WARNING:  
CHECKING PARKING BRAKE  
See a NISSAN dealer for a brake system check if  
the foot brake pedal height does not return to  
normal.  
BRAKE BOOSTER  
Check the brake booster function as follows:  
A
With the engine running, check the distance  
*
1. With the engine off, depress and release the foot  
brake pedal several times. When the brake pedal  
movement (distance of travel) remains the same  
from one pedal application to the next, continue on  
to the next step.  
between the upper surface of the pedal and the metal  
floor. If it is out the range listed, see a NISSAN dealer.  
A
*
: Depressing force  
490 N (50 kg, 110 lb)  
Rear disc brake models:  
— 70 mm (2.76 in) or more  
2. While depressing the foot brake pedal, start the  
engine. The pedal height should drop a little.  
SDI1447A  
3. With the foot brake pedal depressed, stop the  
engine. Keep the pedal depressed for about 30  
seconds. The pedal height should not change.  
From the released position, pull the parking brake lever  
up slowly and firmly. If the number of clicks is out of the  
range listed, see a NISSAN dealer.  
Rear drum brake models:  
— 85 mm (3.35 in) or more  
Self-adjusting brakes  
9 to 10 clicks  
Pulling force 196 N (20 kg, 44 lb)  
4. Run the engine for 1 minute without depressing  
the foot brake pedal, then turn it off. Depress the  
foot brake pedal several times. The pedal travel  
distance will decrease gradually with each de-  
pression as the vacuum is released from the  
booster.  
Your vehicle is equipped with self-adjusting brakes.  
The disc-type brakes self-adjust every time the foot  
brake pedal is applied.  
CHECKING FOOT BRAKE PEDAL  
Brake pad wear warning  
The disc brake pads have audible wear warnings.  
When a brake pad requires replacement, it will make a  
high pitched scraping sound when the vehicle is in  
motion. This scraping sound will first occur only when  
the brake pedal is depressed. After more wear of the  
brake pad, the sound will always be heard even if the  
brake pedal is not depressed. Have the brakes  
checked as soon as possible if the wear warning  
sound is heard.  
If the brakes do not operate properly, have the brakes  
checked by a NISSAN dealer.  
DI1020MR  
Under some driving or climate conditions, occasional  
brake squeaks, squeals or other noises may be heard.  
Occasional brake noise during light to moderate stops  
is normal and does not affect the function or  
performance of the brake system.  
Maintenance and do-it-yourself 8-11  

Related Topics

Popular Owner Manuals