2006-2014 Nissan Qashqai SUV Maintenance and do-it-yourself User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance and do-it-yourself for Your Nissan Qashqai SUV First Generation (2006-2014)

8 Maintenance and do-it-yourself  
Maintenance requirements....................................... 8-2  
Scheduled maintenance...................................... 8-2  
General maintenance.......................................... 8-2  
Where to go for service ...................................... 8-2  
General maintenance............................................... 8-2  
Explanation of general maintenance items ........... 8-2  
Maintenance precautions ......................................... 8-4  
Engine compartment................................................ 8-5  
Engine cooling system ............................................. 8-6  
Checking engine coolant level............................. 8-6  
Changing engine coolant .................................... 8-6  
Engine oil................................................................. 8-8  
Checking engine oil level .................................... 8-8  
Changing engine oil............................................ 8-9  
Changing engine oil filter .................................... 8-11  
Protect the environment...................................... 8-13  
Fuel filter (Diesel engine models) ............................. 8-13  
Draining water .................................................... 8-13  
Bleeding the fuel system..................................... 8-14  
Automatic transmission fluid (ATF)........................... 8-14  
Continuously variable transmission (CVT) fluid ......... 8-14  
Brakes..................................................................... 8-15  
Checking brake pedal......................................... 8-15  
Checking handbrake........................................... 8-15  
Brake and clutch fluid .............................................. 8-15  
Window washer fluid/headlight cleaner fluid  
Integrated keyfob/Intelligent Key battery  
replacement........................................................ 8-19  
Drive belts ............................................................... 8-21  
Spark plugs (Petrol engine models).......................... 8-21  
Air cleaner filter........................................................ 8-21  
Viscous paper type............................................. 8-22  
Dry paper type (where fitted) .............................. 8-22  
Wiper blades........................................................... 8-22  
Cleaning............................................................. 8-22  
Front window wiper replacement ........................ 8-22  
Back door window wiper replacement ................ 8-23  
Windscreen washer nozzle ................................. 8-23  
Fuses ...................................................................... 8-23  
Passenger compartment..................................... 8-23  
Engine compartment........................................... 8-24  
Lights ...................................................................... 8-25  
Headlights .......................................................... 8-25  
Exterior lights...................................................... 8-27  
Interior lights....................................................... 8-27  
Light locations .................................................... 8-27  
Wheels and tyres..................................................... 8-31  
Tyre inflation pressure......................................... 8-31  
Types of tyres..................................................... 8-31  
Snow chains....................................................... 8-32  
Tyre rotation ....................................................... 8-32  
Tyre wear and damage ....................................... 8-33  
Tyre age ............................................................. 8-33  
Changing tyres and wheels................................. 8-33  
Four-wheel drive (4WD) models ......................... 8-33  
Wheel balance.................................................... 8-33  
(where fitted) ........................................................... 8-16  
Battery..................................................................... 8-17  
Vehicle battery.................................................... 8-17  
Jump-starting...................................................... 8-19  
Downloaded from manuals search engine  
Spare tyre .......................................................... 8-33  
Care of wheels ................................................... 8-34  
Downloaded from manuals search engine  
MAINTENANCE REQUIREMENTS  
GENERAL MAINTENANCE  
Your new NISSAN has been designed to have mini-  
mum maintenance requirements with longer service  
intervals, to save you both time and money. How-  
ever, some day-to-day and regular maintenance is  
essential to maintain your NISSAN’s good mechani-  
cal condition, as well as its emission and engine  
performance.  
These checks or inspections can be done by your-  
self, a qualified technician or, if you prefer, your  
NISSAN dealer or qualified workshop.  
During the normal day-to-day operation of the ve-  
hicle, general maintenance should be performed  
regularly as prescribed in this section. If you detect  
any unusual sounds, vibrations or smell, be sure to  
check for the cause or have a NISSAN dealer or  
qualified workshop do it promptly. In addition, you  
should notify a NISSAN dealer or qualified work-  
shop if repairs are required.  
WHERE TO GO FOR SERVICE  
If maintenance service is required or your vehicle  
appears to malfunction, have the systems checked  
and tuned by an authorised NISSAN dealer or quali-  
fied workshop.  
It is the owner’s responsibility to make sure that the  
specified maintenance, as well as general mainte-  
nance, is performed.  
When performing any checks or maintenance work,  
closely observe the “Maintenance precautions” later  
in this section.  
As the vehicle owner, you are the only one who can  
ensure that your vehicle receives the proper mainte-  
nance care.  
EXPLANATION OF GENERAL  
MAINTENANCE ITEMS  
SCHEDULED MAINTENANCE  
Additional information on the following items with  
an asterisk (*) is found later in this section.  
For your convenience, the required scheduled main-  
tenance items are described and listed in the sepa-  
rate Warranty Information and Maintenance book-  
let. You must refer to that booklet to ensure that  
necessary maintenance is performed on your  
NISSAN vehicle at regular intervals.  
The maintenance items listed here should be per-  
formed from time to time, unless otherwise speci-  
fied.  
Outside the vehicle  
Back door, doors and bonnet:  
GENERAL MAINTENANCE  
Check that the back door, all doors and the bonnet  
operate properly. Also ensure that all latches lock  
securely. Lubricate hinges and latches if necessary.  
Make sure that the secondary latch keeps the bon-  
net from opening when the primary latch is released.  
General maintenance includes those items which  
should be checked during normal day-to-day opera-  
tion of the vehicle. They are essential if your vehicle  
is to continue to operate properly. It is your respon-  
sibility to perform these procedures regularly as pre-  
scribed.  
When driving in areas using road salt or other cor-  
rosive materials, check for lubrication frequently.  
Performing general maintenance checks requires  
minimal mechanical skill and a few general automo-  
tive tools.  
8-2 Maintenance and do-it-yourself  
Downloaded from manuals search engine  
Lights*:  
Windscreen:  
Engine oil level*:  
Clean the headlights on a regular basis. Make sure  
that the headlights, stop lights, tail lights, turn signal  
lights, and other lights are all operating properly and  
installed securely. Also check headlight aim.  
Clean the windscreen on a regular basis. Check the  
windscreen at least every six months for cracks or  
other damage. Have a damaged windscreen re-  
paired by a qualified repair facility.  
Check the level after parking the vehicle on a level  
surface and turning off the engine.  
Fluid leaks:  
Check under the vehicle for fuel, oil, water or other  
fluid leaks after the vehicle has been parked for a  
while. Water dripping from the air conditioner after  
use is normal. If you should notice any leaks or if  
petrol fumes are evident, check for the cause and  
have it corrected immediately.  
Tyres*:  
Wiper blades*:  
Check the pressure with a gauge periodically when  
at a service station (including the spare) and adjust  
to the specified pressure if necessary. Check care-  
fully for damage, cuts or excessive wear.  
Check for cracks or wear if they do not wipe prop-  
erly.  
Under the bonnet and vehicle  
The maintenance items listed here should be  
checked periodically, e.g. each time you check the  
engine oil or refuel.  
Tyre rotation*:  
Window washer fluid*:  
Tyres should be rotated every 10,000 km (6,000  
miles) for Two-Wheel Drive (2WD) models and  
5,000 km (3,000 miles) for Four-Wheel Drive (4WD)  
models. However, the timing for tyre rotation may  
vary according to your driving habits and road sur-  
face conditions.  
Check that there is adequate fluid in the tank.  
Inside the vehicle  
Battery*:  
Check if the green indicator on the top of the main-  
tenance free battery is visible. If it is not visible,  
replace the battery as soon as possible.  
The maintenance items listed here should be  
checked on a regular basis, such as when perform-  
ing periodic maintenance, cleaning the vehicle, etc.  
Wheel alignment and balance:  
Accelerator pedal:  
Vehicles operated in high temperatures or under  
severe conditions, check the fluid level frequently.  
If the vehicle pull to either side while driving on a  
straight and level road, or if you detect uneven or  
abnormal tyre wear, there may be a need for wheel  
alignment. If the steering wheel or seat vibrates at  
normal highway speeds, wheel balancing may be  
needed.  
Check the pedal for smooth operation and make  
sure that the pedal does not catch or require uneven  
effort. Keep the floor mats away from the pedal.  
Brake and clutch fluid level*:  
Make sure that the brake and clutch fluid level is  
between the MAX and MIN lines on the reservoir.  
Brake pedal*:  
Check the pedal for smooth operation. If the brake  
pedal suddenly goes down further than normal, the  
pedal feels spongy or the vehicle seems to take  
longer to stop, contact a NISSAN dealer or qualified  
workshop immediately. Keep the floor mat away  
from the pedal.  
Engine coolant level*:  
Check the coolant level when the engine is cold.  
Engine drive belts*:  
Wheel nuts:  
When checking the tyres, make sure no wheel nuts  
are missing, and check for any loose wheel nuts.  
Tighten if necessary.  
Make sure that the drive belts are not frayed, worn,  
cracked or oily.  
Maintenance and do-it-yourself 8-3  
Downloaded from manuals search engine  
MAINTENANCE PRECAUTIONS  
Handbrake*:  
Windscreen wiper and washer*:  
When performing any inspection or maintenance  
work on your vehicle, always take care to prevent  
serious accidental injury to yourself or damage to  
the vehicle. The following are general precautions  
which should be closely observed.  
Confirm that your vehicle is held securely on a fairly  
steep hill with only the handbrake applied.  
Check that the wipers and washer operate properly  
and that the wipers do not streak.  
Seats:  
Check seat position controls such as seat adjust-  
ers, seatback recliner, etc. to ensure they operate  
smoothly and all latches lock securely in every posi-  
tion. Check that the head restraints move up and  
down smoothly and the locks hold securely in all  
latched positions.  
Park the vehicle on a level surface, apply the  
•
handbrake securely and block the wheels to  
prevent the vehicle from moving. For a manual  
transmission models, move the gear lever to  
N (Neutral) position.[For automatic transmis-  
sion or continuously variable transmission  
models: move the selector lever to P (Park)  
position.]  
Seat belts:  
Check that all parts of the seat belt system (e.g.  
buckles, anchors, adjusters and retractors) operate  
properly and smoothly, and are installed securely.  
Check the belt webbing for cuts, fraying, wear or  
damage. See “Seat belts” in the “1. Safety — seats,  
seat belts and supplemental restraint system” sec-  
tion for further details.  
Do not work under the engine bonnet while  
the engine is hot. Turn off the engine and wait  
until it cools down.  
•
Be sure to turn the ignition switch to the “OFF”  
or LOCK position.  
•
When the ignition switch is in the ON or Acc  
position, the cooling fan may start to operate  
suddenly even when the engine is not run-  
ning. To avoid injury, always disconnect the  
negative battery cable before working near  
the engine.  
Steering wheel:  
Check for any change in the steering conditions,  
such as excessive free play, hard steering or strange  
noises.  
Warning lights and audible reminders:  
If you must work with the engine running,  
Make sure that all warning/indicator lights and au-  
dible reminders are operating properly.  
•
keep your hands, clothing, hair and tools away  
from moving fans, belts and any other moving  
parts.  
Windscreen defogger:  
Check that the air comes out of the defogger outlets  
properly when operating the heater or air condi-  
tioner.  
It is advisable to remove ties and any jewel-  
lery, such as rings, watches, etc. before work-  
ing on your vehicle.  
•
8-4 Maintenance and do-it-yourself  
Downloaded from manuals search engine  
ENGINE COMPARTMENT  
If you must run the engine in an enclosed  
space such as a garage, be sure there is  
proper ventilation for exhaust gases.  
Improperly disposed engine oil and/or other  
vehicle fluids can pollute the environment. Al-  
ways conform to local regulations for disposal  
of vehicle fluid.  
For an overview of the engine compartment, see  
“Instrument and control layout” in the “0. Illus-  
trated table of contents” section.  
•
Do not get under a vehicle that is supported  
only by a jack: Use vehicle support stands.  
•
•
•
This section gives instructions regarding only those  
items which are relatively easy for an owner to per-  
form.  
Keep smoking materials, flame and sparks  
away from fuel and battery.  
You should be aware that incomplete or improper  
servicing may result in operating difficulties or ex-  
cessive emissions, and could affect your warranty  
coverage. If in doubt about any servicing, have it  
done by your NISSAN dealer or qualified work-  
shop.  
Never connect or disconnect either the bat-  
tery or any transistorised component connec-  
tor while the ignition switch is in the ON posi-  
tion.  
Never leave the engine or transmission re-  
lated component harness connector discon-  
nected while the ignition switch is in the ON  
position.  
•
•
On petrol engine models with the multiport  
fuel injection (MFI) system, the fuel filter or  
fuel lines should be serviced by a NISSAN  
dealer or qualified workshop because the fuel  
lines are under high pressure even when the  
engine is off.  
Always wear eye protection whenever you  
work on your vehicle.  
•
•
Failure to follow these or other common sense  
guidelines may lead to serious injury or ve-  
hicle damage.  
NISSAN GREEN PROGRAM  
Maintenance and do-it-yourself 8-5  
Downloaded from manuals search engine  
ENGINE COOLING SYSTEM  
Improper servicing or engine coolant change  
can result in reduced heater performance and  
engine overheating.  
•
CHECKING ENGINE COOLANT  
LEVEL  
WARNING  
Never remove the engine coolant reservoir  
•
cap when the engine is hot. Serious burns  
could be caused by high pressure fluid es-  
caping from the engine coolant reservoir. Wait  
until the engine and radiator have cooled  
down.  
WARNING  
To avoid the danger of being scalded, never  
change the coolant when the engine is hot.  
•
•
Avoid direct skin contact with used coolant. If  
skin contact is made, wash thoroughly with  
soap or hand cleaner and plenty of water as  
soon as possible.  
Engine coolant is poisonous and should be  
stored carefully in marked containers out of  
the reach of children.  
•
NDI909Z  
The engine cooling system is filled at the factory  
with a high-quality, year-round and extended life en-  
gine coolant. The high quality engine coolant con-  
tains the specific solutions effective for the anti-cor-  
rosion and the anti-freeze function. Therefore, addi-  
tional cooling system additives are not necessary.  
Keep coolant out of reach of children and  
pets.  
•
Check the coolant level in the reservoir when the  
engine is cold. If the coolant level is below MIN j2 ,  
add coolant up to the MAX j1 level.  
NISSAN GREEN PROGRAM  
Engine coolant must be disposed of properly.  
Check your local regulations.  
CAUTION  
CAUTION  
If the cooling system frequently requires coolant,  
have it checked by a NISSAN dealer or qualified  
workshop.  
When adding or replacing engine coolant, be  
sure to use Genuine NISSAN engine coolant  
or equivalent.  
•
CHANGING ENGINE COOLANT  
CAUTION  
The use of other types of engine coolant may  
damage the engine cooling system.  
•
Major cooling system repairs should be per-  
The engine coolant reservoir tank is equipped  
•
•
formed by a NISSAN dealer or qualified work-  
shop. The service procedures can be found in  
the appropriate NISSAN Service Manual.  
with a pressure cap, use a Genuine NISSAN  
cap or its equivalent when replacement is re-  
quired.  
NDI910Z  
When checking or replacement is required,  
NISSAN recommends contacting a NISSAN  
dealer or qualified workshop for servicing.  
•
8-6 Maintenance and do-it-yourself  
Downloaded from manuals search engine  
13. Stop the engine and check coolant level, allow  
to cool and refill up to the MAX level.  
6. Install the hose and securely tighten the engine  
block drain plug.  
HR16DE, MR20DE, M9R or R9M  
engine  
14. Check radiator lower hose for any signs of leak-  
age.  
7. Fill the reservoir up to the MAX level with cool-  
ant. See “Capacities and recommended  
fuel/lubricants” in the “9. Technical information”  
section for cooling system capacity.  
1. Set the heater or air conditioner temperature  
control to the maximum “HOT” position.  
15. Close the bonnet.  
2. Open the bonnet. For details, see “Bonnet  
release” in the “3. Pre-driving checks and  
adjustments” section.  
8. Install the engine coolant reservoir cap.  
9. Start the engine, and rev the engine two or three  
times under no load.  
3. Open the engine coolant reservoir cap j1 to  
help to drain the coolant.  
10. Touch the radiator hose and feel if the water  
flows.  
4. Disconnect the end of the hose j2 to drain the  
coolant.  
11. Keep racing the engine at a speed of 2,000 –  
2,500 rpm for about 10 minutes.  
5. Flush the cooling system by running clean water  
through the engine coolant reservoir.  
NDI941Z  
12. Observe the coolant temperature gauge for  
signs of overheating.  
6. Install the hose j2 .  
7. Fill the coolant reservoir up to the MAX level.  
K9K engine  
13. Stop the engine and check coolant level, allow  
to cool and refill up to the MAX level.  
See  
“Capacities  
and  
recommended  
fuel/lubricants” in the “9. Technical information”  
section for cooling system capacity.  
1. Set the heater or air conditioner temperature  
control to the maximum “HOT” position.  
14. Check the radiator lower hose for any signs of  
leakage.  
8. Install the engine coolant reservoir cap.  
2. Open the bonnet. For details, see “Bonnet  
release” in the “3. Pre-driving checks and  
adjustments” section.  
15. Close the bonnet.  
9. Start the engine, and rev the engine two or three  
times under no load.  
3. Disconnect the radiator lower hose j1 and open  
the drain plug j2 on the engine block.  
10. Touch the radiator hose and feel if the water  
flows.  
4. Open the engine coolant reservoir cap to help to  
drain the coolant.  
11. Keep racing the engine at a speed of 3,000 rpm  
for about 10 minutes.  
5. Flush the cooling system by running fresh water  
through the engine coolant reservoir.  
12. Observe the coolant temperature gauge for  
signs of overheating.  
Maintenance and do-it-yourself 8-7  
Downloaded from manuals search engine  
ENGINE OIL  
CHECKING ENGINE OIL LEVEL  
CAUTION  
The oil level should be checked regularly. Oper-  
ating with an insufficient amount of oil can dam-  
age the engine, and such damage is not covered  
by warranty.  
NDI1061  
NDI1266  
Euro 5 K9K engine  
R9M engine  
NDI983Z  
HR16DE or MR20DE engine  
NDI976Z  
NDI1265  
M9R engine  
HR16DE or MR20DE engine  
K9K engine  
jA  
jB  
jC  
jD  
j1  
j2  
j3  
M9R engine  
R9M engine  
NDI984Z  
Euro 4 K9K engine  
Normal range  
MIN level  
MAX level  
8-8 Maintenance and do-it-yourself  
Downloaded from manuals search engine  
1. Park the vehicle on a level surface and apply the  
handbrake.  
It is normal to add some engine oil between oil  
maintenance intervals depending on the severity  
of operating conditions or depending on the prop-  
erty of the engine oil used. More engine oil is  
consumed by frequent acceleration/deceleration  
especially when the engine rpm is high. Con-  
sumption is likely to be higher when the engine  
is new. If the rate of oil consumption, after hav-  
ing driven for 5,000 km (3,000 miles), is more  
than 0.5 litre per 1,000 km (621 miles), consult a  
NISSAN dealer or qualified workshop.  
Store used engine oil in marked containers  
out of the reach of children.  
•
2. Start the engine. If the engine is cold, start and  
let the engine idle until it reaches the operational  
temperature.  
3. Turn the engine off.  
4. Wait at least 10 minutes for the engine oil to  
drain back into the oil pan.  
5. Open the bonnet. For details, see “Bonnet  
release” in the “3. Pre-driving checks and  
adjustments” section.  
NDI653Z  
CHANGING ENGINE OIL  
HR16DE or MR20DE engine  
6. Remove the dipstick and wipe it clean.  
WARNING  
Models with M9R engine: the engine oil dipstick  
is attached to the engine oil filler cap. Remove  
the engine oil filler cap and wipe the dipstick  
clean.  
NISSAN recommends contacting a NISSAN  
dealer or qualified workshop for engine oil  
servicing.  
•
NISSAN GREEN PROGRAM  
7. Reinsert it all the way.  
Used oil must not be poured into the ground,  
canals, rivers, etc. It should be disposed of at  
a rubbish tip having proper facilities. Check  
your local regulations.  
Models with M9R engine: install the engine oil  
filler cap.  
8. Remove the dipstick again and check the oil level.  
NDI509Z  
It should be in the normal range j1 .  
Be careful not to burn yourself, as the engine  
oil is hot.  
•
Euro 4 K9K engine  
9. If the oil level is below MIN j2 , remove the en-  
gine oil filler cap and pour the recommended oil  
through the opening. Do not overfill j3 .  
Prolonged and repeated contact with used  
engine oil may cause skin cancer.  
•
10. Recheck the oil level with the dipstick.  
11. Install the engine oil filler cap securely.  
12. Close the bonnet.  
Avoid direct skin contact with used oil. If skin  
•
contact is made, wash thoroughly with soap  
or hand cleaner and plenty of water as soon  
as possible.  
Maintenance and do-it-yourself 8-9  
Downloaded from manuals search engine  
4. Open the bonnet. For details, see “Bonnet  
release” in the “3. Pre-driving checks and  
adjustments” section.  
Drain plug tightening torques:  
HR16DE, MR20DE engine:  
34.3 N•m (3.5 kg-m, 25 ft-lb)  
K9K engine:  
5. Remove the engine oil filler cap.  
20 N•m (2.1 kg-m, 15 ft-lb)  
M9R engine:  
6. Raise and support the vehicle using a suitable  
floor jack and safety jack stands.  
44 N•m (4.5 kg-m, 32 ft-lb)  
R9M engine:  
Place the safety jack stands under the vehicle  
jack-up points.  
50 N•m (5.1 kg-m, 36.9 ft-lb)  
NDI1064  
For details, see “Flat tyre” in the “6. In case of  
emergency” section.  
11. Refill the engine with recommended engine oil  
and quantity.  
Euro 5 K9K engine  
7. Remove the engine compartment under cover.  
8. Place a large drain pan under the drain plug.  
See  
“Capacities  
and  
recommended  
fuel/lubricants” in the “9. Technical information”  
section.  
9. Remove the drain plug with a wrench and com-  
pletely drain the oil.  
12. Check the oil level with the dipstick. For details,  
see “Checking engine oil level” earlier in this  
section. If necessary, add engine oil.  
If the engine oil filter needs to be changed, re-  
move and replace it at this time. See “Changing  
engine oil filter” later in this section.  
13. Install the engine oil filler cap securely.  
14. Start the engine.  
10. Clean and re-install the drain plug along with a  
new washer. Securely tighten the drain plug  
with a wrench. Do not use excessive force.  
NDI978Z  
15. Check for any leakage around the drain plug.  
Correct as required.  
M9R or R9M engine  
1. Park the vehicle on a level surface and apply the  
handbrake.  
16. Turn the engine off and wait several minutes.  
17. Check the oil level again with the dipstick. If  
necessary, add engine oil.  
2. Start the engine. If the engine is cold, start and  
let the engine idle until the engine temperature  
reaches the operational temperature.  
18. Install the engine compartment under cover.  
19. Lower the vehicle carefully to the ground.  
20. Close the bonnet.  
3. Turn the engine off and wait at least 10 minutes  
to let the engine oil drain back into the oil pan.  
8-10 Maintenance and do-it-yourself  
Downloaded from manuals search engine  
3. Remove the engine oil filter unit.  
CHANGING ENGINE OIL FILTER  
HR16DE, MR20DE or K9K engine  
4. Wipe the engine oil filter mounting surface with a  
clean rag.  
WARNING  
NISSAN recommends contacting a NISSAN  
dealer or qualified workshop for engine oil fil-  
ter servicing.  
•
CAUTION  
If any oil is spilled on the engine or the ve-  
hicle, thoroughly wipe it clean.  
NISSAN GREEN PROGRAM  
Installation:  
A used oil filter should be disposed of at a  
rubbish tip having proper facilities.  
1. Clean and re-install the drain plug along with a  
new washer. For tightening torque details, see  
“Changing engine oil” earlier in this section.  
NDI656Z  
HR16DE or MR20DE engine  
2. Coat the rubber gasket on the new engine oil fil-  
ter unit with clean engine oil.  
3. Install the engine oil filter unit by hand until a  
slight resistance is felt, then tighten additionally  
2/3 of a turn.  
Engine oil filter tightening torques:  
HR16DE, MR20DE engine:  
17.7 N•m (1.8 kg-m, 13 ft-lb)  
K9K engine:  
14 N•m (1.4 kg-m, 10 ft-lb)  
NDI985Z  
4. Add engine oil and check the oil level with the  
engine oil dipstick. For details, see “Checking  
engine oil level” earlier in this section and “Ca-  
pacities and recommended fuel/lubricants” in the  
“9. Technical information” section.  
K9K engine  
Removal:  
1. Drain the engine oil. For details, see “Changing  
engine oil” earlier in this section.  
2. Loosen the engine oil filter unit with an oil filter  
wrench. Depending on the engine model, a spe-  
cial cap type wrench may be required. See a  
NISSAN dealer or qualified workshop, if in doubt.  
5. Install the engine oil filler cap.  
6. Start the engine.  
Maintenance and do-it-yourself 8-11  
Downloaded from manuals search engine  
7. After the engine has been warmed up, make sure  
there are no leaks around the engine oil filter unit  
and the drain plug. Correct as required.  
5. Wipe the oil filter cover entirely with a clean rag.  
M9R or R9M engine  
Installation:  
1. Clean and re-install the drain plug along with a  
new washer. For tightening torque details, see  
“Changing engine oil” earlier in this section.  
8. Turn the engine off and wait several minutes.  
Check the oil level and add engine oil, if neces-  
sary.  
2. Install the rubber O-ring, in its housing, on the  
outside of the engine oil filter cover.  
9. Install the engine compartment under cover.  
10. Lower the vehicle carefully to the ground.  
11. Close the bonnet.  
3. Insert the new oil filter element into the engine oil  
filter cover.  
NDI981Z  
4. Coat the rubber O-ring with clean engine oil.  
M9R  
5. Install the engine oil filter cover until a slight re-  
sistance is felt, then tighten additionally 2/3 of a  
turn.  
Tightening torque:  
25 N•m (2.6 kg-m, 18 ft-lb)  
6. Add engine oil and check the oil level with the  
engine oil dipstick. For details, see “Checking  
engine oil level” earlier in this section and “Ca-  
pacities and recommended fuel/lubricants” in the  
“9. Technical information” section.  
NDI1267  
7. Install the engine oil filler cap.  
8. Start the engine.  
R9M  
Removal:  
9. After the engine has been warmed up, make sure  
there are no leaks around the engine oil filter  
cover and the drain plug. Correct as required.  
1. Drain the engine oil. For details, see “Changing  
engine oil” earlier in this section.  
2. Loosen the engine oil filter cover with a wrench.  
10. Turn the engine off and wait several minutes.  
Check the oil level and add engine oil, if neces-  
sary.  
3. Remove the engine oil filter cover then the oil fil-  
ter element.  
4. Remove the rubber O-ring from the filter cover.  
11. Install the engine compartment undercover.  
8-12 Maintenance and do-it-yourself  
Downloaded from manuals search engine  
FUEL FILTER (Diesel engine  
models)  
12. Lower the vehicle carefully to the ground.  
13. Close the bonnet.  
Drained water is mixed with fuel and take  
precautions to prevent the fuel from ad-  
hering to rubber parts such as engine  
mounting insulator.  
•
DRAINING WATER  
PROTECT THE ENVIRONMENT  
4. After draining, close the drain plug manually.  
NISSAN GREEN PROGRAM  
CAUTION  
It is illegal to pollute drains, water courses and soil.  
Use authorised waste collection facilities, including  
civic amenity sites and garages providing facilities  
for the disposal of used oil and used oil filters. If in  
doubt, contact your local authority for advice on dis-  
posal.  
If the drain plug is tightened excessively, it  
can be damaged and as a result, fuel will  
leak.  
•
NDI916Z  
Do not use tools to tighten the drain plug.  
•
Except for models with R9M diesel engine  
5. Bleed air from the fuel system. For details, see  
“Bleeding the fuel system” later in this section.  
The regulations concerning the pollution of the  
environment will vary from country to country.  
Drain the water from the fuel filter:  
–
–
Every time you perform an engine oil change.  
6. Start the engine and make sure there is no fuel  
leakage. Correct as required.  
When the water in fuel filter warning light  
(orange) comes on or flashes irregularly.  
For models with R9M diesel engine  
•
Except for models with R9M diesel engine.  
Proceed as follows:  
Contact a NISSAN dealer or qualified workshop.  
•
1. Connect a suitable drain hose j1 to the drain  
plug j2 .  
2. Place a drain pan j3 under the hose j1 .  
3. Loosen manually the drain plug j2 with 4 to 5  
turns and operate the priming pump j4 to drain  
the water out of the fuel filter.  
CAUTION  
The water from the fuel filter is drained  
with fuel. Prepare a larger capacity pan  
than the volume of the fuel filter.  
•
Maintenance and do-it-yourself 8-13  
Downloaded from manuals search engine  
AUTOMATIC TRANSMISSION  
FLUID (ATF)  
CONTINUOUSLY VARIABLE  
TRANSMISSION (CVT) FLUID  
BLEEDING THE FUEL SYSTEM  
When checking or replacement is required, NISSAN  
recommends contacting a NISSAN dealer or quali-  
fied workshop for servicing.  
When checking or replacement is required, NISSAN  
recommends contacting a NISSAN dealer or quali-  
fied workshop for servicing.  
CAUTION  
CAUTION  
Use only Genuine NISSAN ATF Matic Fluid J  
(or S) or equivalent. Do not mix with other flu-  
ids.  
Use only Genuine NISSAN CVT Fluid NS2. Do  
not mix with other fluids.  
•
•
Using transmission fluid other than Genuine  
•
Using automatic transmission fluid other than  
NISSAN CVT Fluid NS2 will damage the CVT  
transmission, which is not covered by the war-  
ranty.  
•
NDI917Z  
Genuine NISSAN ATF Matic Fluid J (or S) or  
equivalent will cause deterioration in drive-  
ability and automatic transmission durability,  
and may damage the automatic transmission,  
which is not covered by the warranty.  
Except for models with R9M engine  
Except for models with R9M diesel engine:  
•
Bleed the air out of the fuel system after refilling  
an empty fuel tank by the following procedure:  
The specified AT fluid is also described on the cau-  
tion label located under the bonnet. For details, see  
“Air conditioner specification label (where fitted) and  
Automatic transmission fluid label (where fitted)” in  
the “9. Technical information” section  
1. Squeeze the priming bulb jA several times until  
there is a sudden resistance felt in the pressure,  
then stop.  
2. Crank the engine until the engine starts.  
CAUTION  
Do not crank the engine for more than 30 sec-  
onds.  
NOTE  
If the engine does not start, stop cranking  
and repeat step 1 of the procedure.  
•
If the engine does not operate smoothly  
after it has started, race it two or three  
times.  
•
For models with R9M diesel engine:  
•
Contact a NISSAN dealer or qualified workshop.  
8-14 Maintenance and do-it-yourself  
Downloaded from manuals search engine  
BRAKES  
BRAKE AND CLUTCH FLUID  
See “Capacities and recommended fuel/lubricants”  
in the “9. Technical information” section for the rec-  
ommended brake and clutch fluid type.  
CHECKING BRAKE PEDAL  
If the brake pedal suddenly goes down further than  
normal, the pedal feels “spongy” or the vehicle  
seems to take longer to stop, see a NISSAN dealer  
or qualified workshop.  
If fluid must be added frequently, the system should  
be thoroughly checked by a NISSAN dealer or quali-  
fied workshop.  
CHECKING HANDBRAKE  
CAUTION  
Periodically check the holding ability of the hand-  
brake by parking on a steep hill and restraining the  
vehicle by using only the handbrake. If it does not  
hold satisfactorily, see a NISSAN dealer or qualified  
workshop.  
NISSAN recommends that refilling and check-  
•
ing the brake and clutch systems should be  
left to a NISSAN dealer or qualified workshop  
who will have the necessary fluids and techni-  
cal knowledge.  
NDI1038  
LHD models  
RHD models  
jA  
jB  
Do not spill the fluid on painted surfaces. This  
will damage the paint. If fluid is spilled, wash  
with water.  
•
WARNING  
Use only new fluid. Old, inferior, or contami-  
nated fluid may damage the brake and clutch  
systems. The use of improper fluids can dam-  
age the brake system and affect the vehicle’s  
stopping ability.  
•
Clean the filler cap before removing.  
•
•
Brake and clutch fluids are poisonous and  
should be stored carefully in marked contain-  
ers out of the reach of children.  
Check the fluid level in the reservoir. If the fluid level  
is between the MIN j2 and MAX j1 lines or the  
brake warning light comes on, add fluid up to the  
MAX line.  
Maintenance and do-it-yourself 8-15  
Downloaded from manuals search engine  
WINDOW WASHER FLUID/HEADLIGHT CLEANER FLUID (where fitted)  
Always use window washer fluid recom-  
mended by NISSAN dealer or qualified work-  
shop.  
•
NDI919Z  
WARNING  
Anti-freeze window washer is poisonous and  
should be stored carefully in marked containers  
out of the reach of children.  
Check the fluid level in the window washer res-  
ervoir. If the fluid level is low, add window washer  
fluid up to the MAX level.  
•
Refill the reservoir more frequently when driving  
conditions require an increased amount of win-  
dow washer fluid.  
•
Add a washer solvent to the water for better  
•
cleaning. In the winter season, add a window  
washer anti-freeze. Follow the manufacturer’s in-  
structions for the mixture ratio.  
CAUTION  
Do not substitute anti-freeze engine coolant  
for window washer solution. This may result  
in damage to the paint.  
•
8-16 Maintenance and do-it-yourself  
Downloaded from manuals search engine  
BATTERY  
VEHICLE BATTERY  
Caution symbols for battery  
WARNING  
m
WARNING  
Do not operate the vehicle if the fluid in the bat-  
tery is low. Low battery fluid can cause a higher  
load on the battery which can generate heat, re-  
duce battery life, and in some cases lead to an  
explosion.  
No smoking  
No exposed flames  
No sparks  
Never smoke around the battery. Never expose the battery to open flames or  
electrical sparks.  
j1  
j2  
j3  
m
m
Handle the battery cautiously. Always wear eye protection glasses to protect  
against explosion or battery acid.  
Shield eyes  
Keep the battery surface clean and dry. Any cor-  
rosion should be washed off with a solution of  
baking soda and water.  
•
Keep away from  
children  
Never allow children to handle the battery. Keep the battery out of reach of  
children.  
Make certain the terminal connections are clean  
and securely tightened.  
•
Do not allow battery fluid to contact your skin, eyes, fabrics, or painted surfaces.  
After handling the battery or battery cap, immediately wash your hands  
thoroughly. If the battery fluid gets into your eyes, or onto your skin or clothing,  
flush with water immediately for at least 15 minutes and seek medical attention.  
Battery fluid is acid. If the battery fluid gets into your eyes or onto your skin, it  
could cause eyesight loss or burns.  
If the vehicle is not used for 30 days or longer,  
disconnect the “–” negative battery terminal  
cable to prevent discharge.  
•
j4  
Battery acid  
If battery replacement or check is required, con-  
tact a NISSAN dealer or qualified workshop.  
•
Note operating  
instructions  
Before handling the battery, read this instruction carefully to ensure correct and  
safe handling.  
j5  
j6  
m
Explosive gas  
Hydrogen gas, generated by battery fluid, is explosive.  
Maintenance and do-it-yourself 8-17  
Downloaded from manuals search engine  
OK  
j1  
j2  
Battery (Type A)  
Reinitialisation procedure after battery  
reconnection  
ADD  
If the battery has been reconnected, check the fol-  
lowing items:  
2. Add distilled water up to the UPPER level line  
j1 .  
Re-enter the anti-theft system code (where fit-  
ted). For details, see the separately provided  
NISSAN Connect Owner’s Manual.  
If the side of the battery is not clear, check the  
electrolyte water level by looking directly above  
the cell, as illustrated.  
•
Clock setting. For details, see “Vehicle informa-  
3. Tighten cell plugs.  
•
tion display” in the “2. Instruments and controls”  
section or the separately provided NISSAN Con-  
nect (where fitted) Owner’s Manual.  
CAUTION  
DI0137MAZ  
Do not overfill battery cells. Excessive electrolyte  
may leak out of the battery during charging, and  
cause paint damage.  
The C-View® sunshade or power window sys-  
Check the fluid level in each cell. It should be be-  
tween the UPPER j1 and LOWER j2 level lines.  
•
tem may need to be reinitialised. For details, see  
“C-View® glass roof (where fitted)” in the “2. In-  
struments and controls” section or “Windows”  
in the “2. Instruments and controls” section.  
If it is necessary to add fluid, add only distilled water  
to bring the level to the indicator in each filler open-  
ing. Do not overfill.  
Models with Stop/Start System  
1. Remove the cell plugs jA using a suitable tool.  
Ensure that the battery fitted is the special bat-  
•
tery that is enhanced with regard to the charge-  
discharge capacity and life performance. Avoid  
using any other battery for the Stop/Start Sys-  
tem, as this may cause early deterioration of the  
battery or a malfunction of the Stop/Start Sys-  
tem. It is recommended that a Genuine NISSAN  
battery is fitted. For more information, contact a  
NISSAN dealer or qualified workshop.  
NDI920Z  
Maintenance free battery (Type B)  
For a maintenance free battery it is not required to  
check the fluid level. However, NISSAN recom-  
mends to visually check the green indicator jA sta-  
tus periodically. If it is not visible, replace the battery  
as soon as possible.  
If the battery terminal is disconnected (for bat-  
NDI688Z  
•
tery replacement, etc.) and then reconnected,  
there may be some delay before the Stop/Start  
System reactivates.  
Indicator  
8-18 Maintenance and do-it-yourself  
Downloaded from manuals search engine  
CAUTION  
JUMP-STARTING  
INTEGRATED KEYFOB/INTELLIGENT  
KEY BATTERY REPLACEMENT  
CAUTION  
Always hold the battery by the edges, as shown.  
Holding the battery across the contact points will  
seriously deplete the storage capacity.  
If jump-starting is necessary, see “Jump-starting” in  
the “6. In case of emergency” section. If the engine  
does not start by jump starting, the battery may have  
to be replaced. Contact a NISSAN dealer or quali-  
fied workshop.  
Be careful not to touch a circuit board or a  
battery terminal.  
•
NISSAN GREEN PROGRAM  
An improperly disposed battery can harm the  
environment. Always conform to local regula-  
tions for battery disposal.  
The Integrated keyfob/Intelligent Key is wa-  
•
ter-resistant; however, if it does get wet, im-  
mediately wipe it until it gets completely dry.  
To replace the battery, open the Integrated  
keyfob/Intelligent Key carefully in the  
sequence shown in the illustration.  
When changing the battery, do not let dust or  
oil get on the Integrated keyfob/Intelligent  
Key.  
•
SPA0784Z  
Maintenance and do-it-yourself 8-19  
Downloaded from manuals search engine  
Replacement  
1. Integrated keyfob:  
Use a cross-shaped screwdriver to remove  
the screw before opening the lid.  
Intelligent Key:  
a. Slide the locking pin to the unlock position.  
b. Remove the Intelligent Key cap as illustrated.  
NDI779Z  
2. Insert a flat blade screwdriver or a suitable tool  
into the slit of the corner and twist it to open the  
lid.  
Integrated keyfob  
3. Replace the battery with a new one.  
For models equipped with Integrated keyfob, use  
the following battery type:  
CR2016  
For models equipped with Intelligent Key, use  
the following battery type:  
CR2032  
NDI780Z  
Intelligent Key  
Do not touch the internal circuit and electric  
terminals as doing so could cause a malfunc-  
tion.  
•
Make sure that the + side faces the bottom of  
the case, as illustrated.  
•
4. Install the lid in the reverse order of removal.  
5. Operate the buttons to check its operation.  
Contact a NISSAN dealer or qualified workshop  
if you need assistance for battery replacement.  
8-20 Maintenance and do-it-yourself  
Downloaded from manuals search engine  
DRIVE BELTS  
SPARK PLUGS (Petrol engine  
models)  
AIR CLEANER FILTER  
WARNING  
WARNING  
Be sure the ignition switch is in the “OFF” or  
LOCK position. Otherwise the cooling fan or the  
engine may start to operate suddenly.  
Be sure the engine and ignition switch are off  
and that the handbrake is engaged securely.  
CAUTION  
1. Visually inspect each belt for signs of unusual  
wear, cuts, fraying or looseness. If the belt is in  
poor condition or loose, have it replaced or ad-  
justed by a NISSAN dealer or qualified work-  
shop.  
Be sure to use the correct socket to remove  
the spark plugs. An incorrect socket can  
cause damage to the spark plugs.  
•
Always replace spark plugs with recom-  
NDI921Z  
•
mended or equivalent ones.  
Type A  
2. Have the belts checked regularly for condition  
and tension in accordance with the maintenance  
schedule as shown in a separately provided War-  
ranty Information and Maintenance booklet.  
Replace spark plugs according to the maintenance  
schedule shown in the separately provided War-  
ranty Information & Maintenance Booklet.  
If replacement is required, see a NISSAN dealer or  
qualified workshop for servicing.  
NDI922Z  
Type B  
WARNING  
Operating the engine without the air cleaner  
filter, can cause you or others to be burned.  
The air cleaner filter not only cleans the intake  
air, it also stops flame if the engine backfires.  
If the air cleaner filter is not installed and the  
engine backfires, you could be burned.  
•
•
Do not drive without the air cleaner filter.  
Maintenance and do-it-yourself 8-21  
Downloaded from manuals search engine  
WIPER BLADES  
CLEANING  
Be careful when working on the engine with-  
out the air cleaner filter.  
•
FRONT WINDOW WIPER  
REPLACEMENT  
If the windscreen or back door window is not clear  
after using the window washer or if a wiper blade  
chatters when running, wax or other material may be  
on the blade or windscreen.  
VISCOUS PAPER TYPE  
The filter element jA should not be cleaned and  
reused.  
Clean the outside of the windscreen or back door  
window with a washer solution or a mild detergent.  
The windscreen or back door window is clean if  
beads do not form when rinsing with clear water.  
Replace it according to the maintenance schedule  
shown in the separately provided Warranty Informa-  
tion & Maintenance Booklet. When replacing the fil-  
ter, wipe the inside of the air cleaner housing and  
the cover with a damp cloth.  
Clean the blade by wiping it with a cloth soaked in a  
washer solution or a mild detergent. Then rinse the  
blade with clear water. If the windscreen or back  
door window is still not clear after cleaning the  
blades and using the wiper, replace the blades.  
NDI923Z  
DRY PAPER TYPE (where fitted)  
Check the filter element jA to see if it is dirty. If it is  
dirty, shake the element to remove dust.  
1. Pull up the wiper arm.  
2. Press the two side lock pins j1 , then remove the  
Clean or replace it according to the maintenance  
schedule shown in the separately provided War-  
ranty Information & Maintenance Booklet. When  
cleaning or replacing the filter, wipe the inside of the  
air cleaner housing and the cover with a damp cloth.  
CAUTION  
wiper blade as illustrated.  
After wiper blade replacement, return the  
wiper arm to its original position. Otherwise it  
may be damaged when the bonnet is opened.  
•
3. Install the new wiper blade in the reverse order  
of removal.  
4. Return the wiper arm to its original position.  
Make sure the wiper blade contacts the glass.  
Otherwise, the arm may be damaged from  
wind pressure.  
•
Do not open the bonnet when the front wiper  
is in the servicing position other wise it can  
damage the paint surface of the bonnet.  
•
8-22 Maintenance and do-it-yourself  
Downloaded from manuals search engine  
FUSES  
BACK DOOR WINDOW WIPER  
REPLACEMENT  
WINDSCREEN WASHER NOZZLE  
PASSENGER COMPARTMENT  
NDI892Z  
NDI924Z  
If you wax the surface of the engine bonnet, be care-  
ful not to let wax get into the washer nozzle jA . This  
may cause clogging or improper windscreen washer  
operation. If wax gets into the nozzle, remove it with  
a needle or small pin jB .  
1. Lift the wiper arm.  
2. Hold and rotate carefully the wiper blade clock-  
wise until the blade becomes free.  
3. Insert the new wiper blade onto the wiper arm  
and snap it into place.  
4. Return the wiper arm to its original position.  
NDI1088  
CAUTION  
Never use a fuse of higher or lower amperage  
rating than that specified on the fuse box  
cover.  
•
Never pull the harness or wires when discon-  
necting the connector.  
•
Maintenance and do-it-yourself 8-23  
Downloaded from manuals search engine  
Be careful not to damage the connector sup-  
port bracket when disconnecting the connec-  
tor.  
1. Make sure the ignition switch and the headlight  
switch are in the “OFF” position.  
•
ENGINE COMPARTMENT  
2. Open the bonnet. For details, see “Bonnet  
release” in the “3. Pre-driving checks and  
adjustments” section.  
If any electrical equipment does not operate, check  
for an open fuse.  
The fuse box is located in the lower part of the  
instrument panel at the driver’s side.  
3. Remove the clips j1 (where fitted) and air duct  
j2 (where fitted).  
The affected circuits j2 are shown on the back of  
the fuse box lid j1 .  
4. Remove the fusible link covers.  
5. Locate the fuse that needs to be replaced.  
1. Make sure the ignition switch and the headlight  
switch are in the “OFF” position.  
6. Remove the fuse with the fuse puller (where fit-  
ted). The fuse puller is located in the fuse box of  
the passenger compartment.  
2. Open the fuse box lid.  
3. Locate and remove the fuse with the fuse puller  
(where fitted).  
7. If the fuse is open jA , replace it with a new fuse  
jB .  
NOTE  
8. Install the fusible link covers.  
The fuse puller is stored in the fuse box.  
9. Install the air duct and clips (where fitted) in the  
reverse order of removal.  
4. If the fuse is open jA , replace it with a new fuse  
jB .  
10. Close the bonnet.  
5. Close the fuse box lid.  
NOTE  
NDI1089  
NOTE  
If the new fuse opens again, after installing,  
have the electrical system checked and re-  
paired by a NISSAN dealer or qualified work-  
shop.  
If the new fuse opens again, after installing,  
have the electrical system checked and re-  
paired by a NISSAN dealer or qualified work-  
shop.  
CAUTION  
Never use a fuse of higher or lower amperage  
rating than that specified on the fuse box cover.  
If any electrical equipment does not operate, check  
for an open fuse.  
8-24 Maintenance and do-it-yourself  
Downloaded from manuals search engine  
LIGHTS  
HEADLIGHTS  
Low beam  
High beam  
Air duct  
jA  
jB  
jC  
Xenon (low beam) headlight  
(where fitted)  
The gas discharge headlight is a projector style  
which uses a xenon headlight bulb.  
WARNING  
HIGH VOLTAGE  
When the xenon headlights are on, they pro-  
•
duce a high voltage. To prevent an electric  
shock, never attempt to modify or  
disassemble the xenon headlights assembly.  
Should the xenon headlight bulb need to be  
replaced, have it done ONLY by a NISSAN  
dealer or qualified workshop.  
•
Xenon headlight bulb replacement:  
CAUTION  
The following safety instructions must be ob-  
served when it is necessary to replace the xenon  
headlight bulb yourself:  
When handling the bulb the necessary pre-  
•
cautions should always be taken on account  
of the high pressure (i.e. wear gloves and  
safety glasses and use the bulb in a closed  
headlight, etc).  
NDI1268  
Maintenance and do-it-yourself 8-25  
Downloaded from manuals search engine  
Only hold the xenon headlight bulb by the  
base.  
3. When the broken bulb is located in the headlight  
assembly under the air duct, carefully remove the  
clips and rotate the air duct jc clockwise a 1/4  
of a turn.  
•
•
•
Replacing the halogen headlight bulb  
CAUTION  
The bulb is manufactured from high-quality  
quartz and is under high pressure.  
High pressure halogen gas is sealed inside  
•
the halogen bulb. The bulb may break if the  
glass envelope is scratched or the bulb is  
dropped.  
4. Remove the cap (jA or jB ) of the headlight as-  
Damage, soiling, and fingerprints should be  
avoided and, if necessary, removed with alco-  
hol before installing the bulb.  
sembly.  
5. Turn the connector 1/4 of a turn in the anti clock-  
wise direction and remove the headlight bulb.  
When handling the bulb, DO NOT TOUCH THE  
GLASS ENVELOPE.  
•
When the headlights are switched on, the  
bulbs produce a certain amount of UV radia-  
tion. In order to avoid any impairment of health  
(burning and conjunctivitis), the bulb should  
only be used in closed headlights with appro-  
priate UV–absorbing front glass.  
•
6. Install the new bulb in the reverse order of re-  
moval and make sure that the cap is securely  
sealed with the headlight body.  
Use the same number type and wattage as  
originally installed.  
•
Aiming is usually not necessary after replac-  
•
7. Where removed (step 3.), re-install the air duct  
ing the bulb. When aiming adjustment is nec-  
essary, contact a NISSAN dealer or qualified  
workshop.  
jc and clips in the order of removal.  
Due to the risk of burning, the bulb should be  
left to cool down for 3 minutes after switching  
off before touching.  
•
•
•
•
8. Reconnect the negative (—) battery cable and  
close the bonnet.  
Do not leave the bulb out of the headlight  
•
NOTE  
reflector for a long period of time as dust,  
moisture or smoke may enter the headlight  
body and affect the performance of the head-  
light.  
Due to the use of mercury and various salts,  
the bulb should be treated as special waste  
when discarded.  
Fog may temporarily form inside the lens of the  
exterior lights in the rain or in a car wash. The fog  
is caused by a temperature difference between  
the inside and the outside of the lens. This is not  
a malfunction. If large droplets can be seen, then  
contact a NISSAN dealer or qualified workshop.  
The bulb may only be operated with a suitable  
ballast which produces very high voltages  
when switched on and during operation.  
The headlight is a semi-sealed beam type which  
uses a replaceable headlight (halogen) bulb. A bulb  
can be replaced from inside the engine compart-  
ment without removing the headlight assembly.  
Contact with bulb and wires should therefore  
be avoided and a safe distance of at least 30  
mm should be maintained.  
Contact a NISSAN dealer or qualified workshop, if  
you need assistance for bulb replacement.  
1. Open the bonnet. For details, see “Bonnet  
release” in the “3. Pre-driving checks and  
adjustments” section.  
2. Disconnect the negative (—) battery cable.  
8-26 Maintenance and do-it-yourself  
Downloaded from manuals search engine  
EXTERIOR LIGHTS  
LIGHT LOCATIONS  
Item  
Wattage (W)  
55  
Front side light  
j1  
j2  
j3  
j4  
j5  
j6  
j7  
j8  
j9  
j10  
j11  
j12  
j13  
j14  
j15  
j16  
Headlight (Low or high beam:  
type H7)  
Front turn signal light  
Room light/Map lights (where fitted)  
Reading light – type A (where fitted)  
Side turn signal light  
Front turn signal light  
Front side light  
21  
5
Front fog light (H11 type, where  
fitted) *1  
55  
Headlights  
Side turn signal light  
Rear combination light  
Turn signal light  
5
Front fog light (where fitted)  
Luggage compartment light (where fitted)  
High mounted stop light  
Room light (where fitted)  
Reading lights (where fitted)  
Rear combination light  
Reverse light  
21  
LED  
21  
Stop/Tail light *1  
Reverse light *1  
High-mounted stop light *1  
Number plate light  
Rear fog light  
LED  
5
21  
*1:  
If replacement is required, contact a NISSAN dealer  
or qualified workshop.  
Number plate light  
INTERIOR LIGHTS  
Rear fog light  
Item  
Wattage  
(W)  
Footwell light (where fitted)  
Room light/Map lights (where fitted)  
Foot well light (where fitted)  
5
3
Room light — rear (where fitted)  
5
8
5
Reading lights — rear (where fitted)  
Luggage compartment light (where fitted)  
NDI1059  
Light locations  
Maintenance and do-it-yourself 8-27  
Downloaded from manuals search engine  
Replacing procedures  
NDI707  
All other lights are either type A, B, C or D.  
When replacing a bulb, first remove the lens  
and/or cover.  
REMOVE  
NDI930  
NDI931  
INSTALL  
Front side light  
Front turn signal light  
8-28 Maintenance and do-it-yourself  
Downloaded from manuals search engine  
NDI932Z  
NDI739Z  
Side turn signal light  
Room light — rear (where fitted)  
NDI740Z  
Room light/Map lights (where fitted)  
NDI933  
Reading light — rear (where fitted)  
Maintenance and do-it-yourself 8-29  
Downloaded from manuals search engine  
NDI1097  
NDI934  
NDI1035  
Foot well light (where fitted)  
Luggage compartment light  
Number plate light  
8-30 Maintenance and do-it-yourself  
Downloaded from manuals search engine  
WHEELS AND TYRES  
In case of a flat tyre, see “Flat tyre” in the “6. In case  
of emergency” section.  
TYRE INFLATION PRESSURE  
Periodically check the tyre pressure (including the  
spare tyre). An incorrect tyre pressure may ad-  
versely affect tyre life and vehicle handling.  
NOTE  
Incorrectly inflated tyres can also lead to poor  
steering ability and make the driver suspect a  
steering problem: keep the vehicle’s tyres in-  
flated to the correct pressure at all times.  
The tyre pressure should be checked when tyres  
are COLD. Tyres are considered COLD after the  
vehicle has been parked for three or more hours, or  
driven less than 1.6 km (1 mile). COLD tyre pres-  
sures are shown on the tyre placard affixed to the  
driver’s side centre pillar.  
Insufficient pressure can lead to an overheating of  
the tyre and subsequent internal damage. At high  
speeds, this could result in tread separation and  
even bursting of the tyre.  
NDI1098  
Rear combination light  
TYPES OF TYRES  
CAUTION  
Turn signal light  
jA  
When changing or replacing tyres, be sure all  
four tyres are of the same type (i.e., summer,  
all season or snow) and construction.  
•
A NISSAN dealer or qualified workshop may  
be able to help you with information about  
tyre type, size, speed rating and availability.  
•
NDI1036  
Rear fog light  
Maintenance and do-it-yourself 8-31  
Downloaded from manuals search engine  
Replacement tyres may have a lower speed  
rating than the factory equipped tyres, and  
may not match the potential maximum vehicle  
speed. Never exceed the maximum speed rat-  
ing of the tyre.  
may be used. However, some provinces and states  
prohibit their use. Check local, state and provincial  
laws before installing studded tyres. Skid and trac-  
tion capabilities of studded snow tyres, on wet or  
dry surfaces, may be poorer than that of non-stud-  
ded snow tyres.  
roads, be sure to change to 2WD mode, see  
“Four-wheel Drive (4WD) (where fitted)” in the  
“5. Starting and driving” section.  
•
TYRE ROTATION  
All season tyres  
SNOW CHAINS  
NISSAN specifies all season tyres on some models  
to provide good performance for use all year around,  
including snowy and icy road conditions. All season  
tyres are identified by ALL SEASON and/or M&S  
on the tyre sidewall. Snow tyres have better snow  
traction than all season tyres and may be more ap-  
propriate in some areas.  
Use of snow chains may be prohibited in some ar-  
eas. Check the local laws before installing snow  
chains. When installing snow chains, make sure they  
are of proper size for the tyres on your vehicle and  
are installed according to the chain manufacturer’s  
suggestions. Use chain tensioners when recom-  
mended by the snow chain manufacturer to ensure  
a tight fit. Loose end links of the snow chain must be  
secured or removed to prevent the possibility of  
whipping action damage to the fenders or undercar-  
riage.  
NDI762Z  
Summer tyres  
NISSAN specifies summer tyres as standard fit.  
These tyres provide superior performance under  
typical mild weather conditions.  
NISSAN recommends that tyres be rotated every  
10,000 km (6,000 miles) for Two-Wheel Drive  
(2WD) vehicles and 5,000 km (3,000 miles) for  
Four-Wheel Drive (4WD) vehicles.  
In addition, drive at a reduced speed. Otherwise,  
your vehicle can be damaged and/or vehicle han-  
dling and performance may be adversely affected.  
If you plan to operate your vehicle in snowy or icy  
conditions, NISSAN recommends the use of SNOW  
or ALL SEASON tyres on all four wheels.  
See “Flat tyre” in the “6. In case of emergency” sec-  
tion for tyre replacing procedures.  
Snow chains must be installed only on the front  
wheels and not on the rear wheels.  
Snow tyres  
WARNING  
If snow tyres are needed, it is necessary to select  
tyres equivalent in size and load rating to the original  
equipment tyres. If you do not, it can adversely af-  
fect the safety and handling of your vehicle.  
CAUTION  
After rotating the tyres, adjust the tyre pres-  
sure.  
•
Never install snow chains on a temporary-use  
or small size spare tyre.  
•
Retighten the wheel nuts when the vehicle  
has been driven for the first 1,000 km (600  
miles) (also in cases of a flat tyre, etc.).  
•
Generally, snow tyres will have lower speed ratings  
than factory equipped tyres and may not match the  
potential maximum vehicle speed. Never exceed the  
maximum speed rating of the tyre.  
Do not drive with snow chains on paved roads  
•
which are clear of snow. Driving with chains in  
such conditions can cause damage to the  
various mechanisms of the vehicle due to  
some overstress. When driving on clear paved  
Do not include the temporary-use spare tyre  
in the tyre rotation.  
•
For additional traction on icy roads, studded tyres  
8-32 Maintenance and do-it-yourself  
Downloaded from manuals search engine  
Incorrect tyre selection, fitting, care or main-  
tenance can affect vehicle safety with risk of  
accident and injury. If in doubt, consult a  
NISSAN dealer or the tyre manufacturer.  
Tyres degrade with age as well as the use they are  
subjected to. Have the tyres checked and balanced  
frequently by a NISSAN dealer or qualified work-  
shop. Report all accidents where the tyre is knocked  
even if it is minor.  
early tyre wear, possibly degraded vehicle handling  
characteristics and/or interference with the brake  
discs. Such interference can lead to decreased  
braking efficiency and/or early brake pad wear.  
•
TYRE WEAR AND DAMAGE  
FOUR-WHEEL DRIVE (4WD) MODELS  
CAUTION  
CHANGING TYRES AND WHEELS  
Always use tyres of the same size, brand, con-  
•
WARNING  
struction (bias, bias-belted or radial), and  
tread pattern on all four wheels. Failure to do  
so may result in a circumference difference  
between tyres on the front and rear axles  
which will cause excessive tyre wear and may  
damage the transmission, transfer case and  
differential gears.  
Do not install a deformed wheel or tyre even if it  
has been repaired. Such wheels or tyres could  
have structural damage and could fail without  
warning.  
When replacing a tyre, use the same size, speed  
rating and load carrying capacity as originally  
equipped. Recommended types and sizes are men-  
tioned in “Wheels and Tyres” in the “9. Technical  
information” section.  
SDI1663Z  
ONLY use spare tyres specified for the four  
wheel drive (4WD) models.  
•
Tyres should be periodically inspected for wear,  
cracking, bulging or objects caught in the tread. If  
excessive wear, cracks, bulging or deep cuts are  
found, the tyre should be replaced.  
WHEEL BALANCE  
The use of tyres other than those recommended or  
the mixed use of tyres of different brands, construc-  
tion (bias, bias-belted or radial), or tread patterns  
can adversely affect the ride, braking, handling,  
ground clearance, body-to-tyre clearance, snow  
chain clearance, speedometer calibration, headlight  
aim and bumper height.  
Unbalanced wheels may affect vehicle handling and  
tyre life. Even with regular use, wheels can get out  
of balance. Therefore, they should be balanced as  
required.  
The original tyres have a built-in tread wear indica-  
tor j1 . When the wear indicator is visible, the tyre  
should be replaced.  
Wheel balance service should be performed with  
the wheels off the vehicle. Spin balancing the front  
wheels on the vehicle could lead to transmission  
damage.  
The wear indicator locations are indicated by the  
location marks j2 .  
WARNING  
TYRE AGE  
Some of these effects may lead to accidents and  
could result in serious personal injury.  
SPARE TYRE  
Remember tyre age. Never use a tyre over six years  
old, regardless of whether they have been used or  
not.  
The temporary-use spare wheel/tyre can be identi-  
fied by the temporary-use spare tyre label which  
contrasts to the standard road wheels. If in doubt,  
If the wheels are changed for any reason, always  
replace with wheels which have the same offset  
dimension. Wheels of a different offset could cause  
Maintenance and do-it-yourself 8-33  
Downloaded from manuals search engine  
contact a NISSAN dealer, qualified workshop or  
see “Spare tyre” in the “6. In case of emergency”  
section.  
See “Spare tyre” in the “6. In case of emergency”  
section for more details.  
CARE OF WHEELS  
Emergency tyre puncture repair kit  
(where fitted)  
For details, see “Care of wheels” in the “7. Appear-  
ance and care” section.  
The emergency tyre puncture repair kit is supplied  
to the vehicle instead of a spare tyre. The repair kit  
must be used for temporarily fixing a minor tyre  
puncture. After using the repair kit, see a NISSAN  
dealer or qualified workshop as soon as possible for  
tyre inspection and repair/replacement.  
CAUTION  
Do not use the emergency tyre puncture repair  
kit under the following conditions. Contact a  
NISSAN dealer or qualified workshop or profes-  
sional road assistance.  
when the sealant has passed its expiration  
date (shown on the label attached to the seal-  
ant bottle)  
•
when the cut or the puncture is approximately  
4 mm (0.16 in) or longer  
•
when the side of the tyre is damaged  
•
when the vehicle has been driven with a con-  
siderable loss of air from the tyre  
•
when the tyre is completely displaced inside  
or outside the rim  
•
when the tyre rim is damaged  
•
when two or more tyres are flat  
•
8-34 Maintenance and do-it-yourself  
Downloaded from manuals search engine  

Related Topics

Popular Owner Manuals