OK
j1
j2
Battery (Type A)
Reinitialisation procedure after battery
reconnection
ADD
If the battery has been reconnected, check the fol-
lowing items:
2. Add distilled water up to the UPPER level line
j1 .
Re-enter the anti-theft system code (where fit-
ted). For details, see the separately provided
NISSAN Connect Owner’s Manual.
If the side of the battery is not clear, check the
electrolyte water level by looking directly above
the cell, as illustrated.
•
Clock setting. For details, see “Vehicle informa-
3. Tighten cell plugs.
•
tion display” in the “2. Instruments and controls”
section or the separately provided NISSAN Con-
nect (where fitted) Owner’s Manual.
CAUTION
DI0137MAZ
Do not overfill battery cells. Excessive electrolyte
may leak out of the battery during charging, and
cause paint damage.
The C-View® sunshade or power window sys-
Check the fluid level in each cell. It should be be-
tween the UPPER j1 and LOWER j2 level lines.
•
tem may need to be reinitialised. For details, see
“C-View® glass roof (where fitted)” in the “2. In-
struments and controls” section or “Windows”
in the “2. Instruments and controls” section.
If it is necessary to add fluid, add only distilled water
to bring the level to the indicator in each filler open-
ing. Do not overfill.
Models with Stop/Start System
1. Remove the cell plugs jA using a suitable tool.
Ensure that the battery fitted is the special bat-
•
tery that is enhanced with regard to the charge-
discharge capacity and life performance. Avoid
using any other battery for the Stop/Start Sys-
tem, as this may cause early deterioration of the
battery or a malfunction of the Stop/Start Sys-
tem. It is recommended that a Genuine NISSAN
battery is fitted. For more information, contact a
NISSAN dealer or qualified workshop.
NDI920Z
Maintenance free battery (Type B)
For a maintenance free battery it is not required to
check the fluid level. However, NISSAN recom-
mends to visually check the green indicator jA sta-
tus periodically. If it is not visible, replace the battery
as soon as possible.
If the battery terminal is disconnected (for bat-
NDI688Z
•
tery replacement, etc.) and then reconnected,
there may be some delay before the Stop/Start
System reactivates.
Indicator
8-18 Maintenance and do-it-yourself
Downloaded from manuals search engine