2006-2014 Nissan Qashqai SUV Maintenance and do-it-yourself -> Wiper blades User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance and do-it-yourself -> Wiper blades for Your Nissan Qashqai SUV First Generation (2006-2014)

WIPER BLADES  
CLEANING  
Be careful when working on the engine with-  
out the air cleaner filter.  
•
FRONT WINDOW WIPER  
REPLACEMENT  
If the windscreen or back door window is not clear  
after using the window washer or if a wiper blade  
chatters when running, wax or other material may be  
on the blade or windscreen.  
VISCOUS PAPER TYPE  
The filter element jA should not be cleaned and  
reused.  
Clean the outside of the windscreen or back door  
window with a washer solution or a mild detergent.  
The windscreen or back door window is clean if  
beads do not form when rinsing with clear water.  
Replace it according to the maintenance schedule  
shown in the separately provided Warranty Informa-  
tion & Maintenance Booklet. When replacing the fil-  
ter, wipe the inside of the air cleaner housing and  
the cover with a damp cloth.  
Clean the blade by wiping it with a cloth soaked in a  
washer solution or a mild detergent. Then rinse the  
blade with clear water. If the windscreen or back  
door window is still not clear after cleaning the  
blades and using the wiper, replace the blades.  
NDI923Z  
DRY PAPER TYPE (where fitted)  
Check the filter element jA to see if it is dirty. If it is  
dirty, shake the element to remove dust.  
1. Pull up the wiper arm.  
2. Press the two side lock pins j1 , then remove the  
Clean or replace it according to the maintenance  
schedule shown in the separately provided War-  
ranty Information & Maintenance Booklet. When  
cleaning or replacing the filter, wipe the inside of the  
air cleaner housing and the cover with a damp cloth.  
CAUTION  
wiper blade as illustrated.  
After wiper blade replacement, return the  
wiper arm to its original position. Otherwise it  
may be damaged when the bonnet is opened.  
•
3. Install the new wiper blade in the reverse order  
of removal.  
4. Return the wiper arm to its original position.  
Make sure the wiper blade contacts the glass.  
Otherwise, the arm may be damaged from  
wind pressure.  
•
Do not open the bonnet when the front wiper  
is in the servicing position other wise it can  
damage the paint surface of the bonnet.  
•
8-22 Maintenance and do-it-yourself  
Downloaded from manuals search engine  
FUSES  
BACK DOOR WINDOW WIPER  
REPLACEMENT  
WINDSCREEN WASHER NOZZLE  
PASSENGER COMPARTMENT  
NDI892Z  
NDI924Z  
If you wax the surface of the engine bonnet, be care-  
ful not to let wax get into the washer nozzle jA . This  
may cause clogging or improper windscreen washer  
operation. If wax gets into the nozzle, remove it with  
a needle or small pin jB .  
1. Lift the wiper arm.  
2. Hold and rotate carefully the wiper blade clock-  
wise until the blade becomes free.  
3. Insert the new wiper blade onto the wiper arm  
and snap it into place.  
4. Return the wiper arm to its original position.  
NDI1088  
CAUTION  
Never use a fuse of higher or lower amperage  
rating than that specified on the fuse box  
cover.  
•
Never pull the harness or wires when discon-  
necting the connector.  
•
Maintenance and do-it-yourself 8-23  
Downloaded from manuals search engine  

Related Topics

Popular Owner Manuals