AUTOMATIC LOCKING WHEN DRIVING
Activating/deactivating the
Operating faults
function
With the engine running, press the
button 1 for approximately 5 seconds,
until you hear a warning beep.
If you experience an operating fault
(no automatic locking, the indicator
light incorporated in button 1 does not
light up when trying to lock the open-
ing elements, etc.), firstly check that the
opening elements are properly closed.
If they are properly closed, contact an
authorised dealer.
1
NB: if a door is opened or closed, it will
automatically lock again when the vehi-
cle reaches a speed of 6 mph (10 km/h).
Operating principle
After the vehicle is started, the system
automatically locks the doors when you
are driving at approximately 6 mph (10
km/h) and over.
The door can be unlocked:
– by pressing the button 1 to unlock
the doors;
– with the vehicle stationary, by open-
ing a front door from inside the vehi-
cle.
Driver’s responsibility
If you decide to keep the
doors locked when you are
driving, remember that it
may be more difficult for those as-
sisting you to gain access to the
passenger compartment in the
event of an emergency.
1.35
English 
