STEERING WHEEL (1/2)
Activating the function
With the ignition on, press switch 3, the
indicator light in the switch lights up.
Deactivating the function
- Automatic:
2
The function switches off automatically
after the regulation phase of approxi-
mately 30 minutes. The indicator light
in switch 3 goes out.
1
Note: if the function has switched off
automatically, press the switch 3 twice
to reactivate it.
3
If switch 3 is not pressed again, the
function will be reactivated the next
time the ignition is switched on.
Adjusting the steering wheel
height and depth
Lower the lever 1 and position the
Steering wheel heating
(depending on vehicle)
- Manually:
This function heats the steering
wheel 2.
steering wheel in the required position.
To deactivate the function during the
regulation phase, press the switch 3.
The indicator light in switch 3 goes out.
Then, raise the lever fully, beyond the
point of resistance to lock the steering
wheel.
Operating principle
When the temperature is reached, the
function regulates the temperature of
the heated areas for approximately
30 minutes and then switches off auto-
matically.
Make sure that the steering wheel is
correctly locked.
For safety reasons, only
adjust the steering wheel
when the vehicle is station-
ary.
1.36
English 
