Get Getting to know your vehicle -> Child safety: choosing a child seat mounting Guide for Renault Zoe 4 Door Third Generation (2019-2024)

CHILD SAFETY: choosing a child seat mounting (1/3)

There are two ways of attaching child

seats: via the seat belt or using the

ISOFIX system.

Attachment via the seat belt

The seat belt must be adjusted to

ensure that it is effective in the event of

harsh braking or an impact.

Ensure that the strap paths indicated

by the child seat manufacturer are re-

spected.

Always check that the seat belt is cor-

rectly fastened by pulling it up, then

pulling it out fully whilst pressing on the

child seat.

Check that the seat is correctly held by

moving it from side to side and back

to front: the seat should remain firmly

fixed.

Check that the child seat has not been

installed at an angle and that it is not

resting against a window.

The seat belt must never

be twisted or the tension

relieved. Never pass the

shoulder strap under the

arm or behind the back.

Check that the seat belt has not

been damaged by sharp edges.

If the seat belt does not operate nor-

mally, it will not protect the child.

Consult an approved dealer. Do not

use this seat until the seat belt has

been repaired.

Do not use the child seat

if it may unfasten the seat

belt restraining it: the base

of the seat must not rest on

the buckle and/or catch of the seat

belt.

1.58

CHILD SAFETY: choosing a child seat mounting (2/3)

Attachment using the ISOFIX

system

Attach the child seat with the ISOFIX

locks, if these are provided. The ISOFIX

system allows quick, easy, safe fitting.

Authorised ISOFIX child seats are ap-

proved in accordance with regulation

ECE-R44 in one of the three following

scenarios:

The ISOFIX system consists of 2 rings

and, in some cases, a third ring.

– universal ISOFIX 3-point forward-

facing seat;

– semi-universal ISOFIX 2-point seat;

– specific.

For the latter two, check that your child

seat can be installed by consulting the

list of compatible vehicles.

The two rings 1 are located between

the seatback and the seat base and are

No modifications may be

made to the component

parts of the restraint system

identified by the

marking.

(ISOFIX seat belts, seats

and their mountings) originally fitted.

Before using an ISOFIX

child seat that you pur-

chased for another vehicle,

check that its installation is

authorised. Consult the list of ve-

hicles which can be fitted with the

seat from the equipment manufac-

turer.

1.59

CHILD SAFETY: choosing a child seat mounting (3/3)

The third ring is used to attach the

upper strap on some child seats: you

must attach hook 2 to ring 3 for a rear

seat and ring 4 for a front seat.

Pull the belt so that the back of the child

seat comes into contact with the back

of the vehicle seat.

Check that the seatback

of the forward-facing child

seat is in contact with the

seatback of the vehicle

seat. In this case, the child seat may

not always rest on the seat base of

the vehicle seat.

Note: it is essential to use the rings

^{marked with the symbol}.

The ISOFIX anchorage points have been exclusively designed for child

seats with the ISOFIX system. Never fit a different type of child seat, seat

belt or other objects to these anchorage points.

Check that nothing is obstructing the anchorage points.

The child seat strap must

be attached to the corre-

sponding ring.

If your vehicle has been involved in a road accident, have the ISOFIX anchorage

points checked and replace your child seat.

1.60

Getting to know your vehicle -> Child safety: choosing a child seat mounting for Your Renault Zoe 4 Door Third Generation (2019-2024)

Related Topics

Popular Owner Manuals

Latest Owner Manuals