3-80 Instruments and controls/Mirrors
glare from vehicle headlights behind you
3. Press the switch repeatedly until the
& Auto-dimming mirror/com-
and automatically dim the mirror to elim-
correct zone setting for your location is
pass with HomeLink ® (if
inate glare and preserve your vision. For
displayed.
equipped)
this reason, use care not to cover the
4. Releasing the button for 10 seconds
sensors with stickers, or other similar
will exit the zone setting mode.
items. Periodically wipe the sensors clean
using a piece of dry soft cotton cloth or an
! Compass calibration
applicator.
1. If a “C” is displayed in the compass
! Compass zone adjustment
window, the compass needs to be cali-
brated.
2. Drive the vehicle in a circle at 5 mph (8
km/h) or less until the display reads a
direction.
3. You can also calibrate the compass by
driving your vehicle on your everyday
routine. The compass will be calibrated
once it has tracked a complete circle.
1)
HomeLink ® button 1
4. To recalibrate your compass, push and
2)
HomeLink ® button 2
hold the switch for 9 seconds until a “C”
3)
LED
4)
HomeLink ® button 3
appears in the compass window.
5)
Sensor
5. Calibrate the compass according to
6)
Automatic dimming on/off button
step 2 or step 3.
Compass calibration zones
7)
Compass display button
8)
Compass display
1. Refer to the “Compass calibration
The auto-dimming mirror has an anti-glare
zones” map shown above to verify that
feature which automatically reduces glare
the compass zone setting is correct for
coming from headlights of vehicles behind
your geographical location.
you. It also contains a built-in compass
2. Press and hold the switch for 6
and HomeLink ® wireless control system.
seconds until the zone selection comes
. By pressing the automatic dimming on/
up (a number will be displayed in the
off button, the automatic dimming function
mirror compass window).
is toggled on or off. When the automatic
English 
