3-79
Instruments and controls/Mirrors
& Auto-dimming mirror/com-
Mirrors
is to ensure good rearward visibility during
reversing.
pass (if equipped)
. By pressing and releasing the switch
Always check that the inside and outside
for less than 3 seconds, the compass
mirrors are properly adjusted before you
display is toggled on or off. When the
start driving.
compass is on, an illuminated compass
reading will appear in the upper right
& Inside mirror
corner of the mirror.
When cleaning the mirror, use a paper
towel or similar material dampened with
glass cleaner. Do not spray glass cleaner
directly on the mirror as that may cause
the liquid cleaner to enter the mirror
housing and damage the mirror.
! Photosensors
1)
LED
2)
Switch
3)
Sensor
4)
Compass display
The auto-dimming mirror has an anti-glare
feature which automatically reduces glare
The inside mirror has a day and night
coming from headlights of vehicles behind
position. Pull the tab at the bottom of the
you. It also contains a built-in compass.
mirror toward you for the night position.
Push it away for the day position. The
. By pressing and holding the switch for
night position reduces glare from head-
3 seconds, the automatic dimming func-
lights.
tion is toggled on or off. When the
automatic dimming function is on, the
LED indicator will illuminate.
Even with the mirror in anti-glare mode,
The mirror has a photosensor attached on
the mirror surface turns bright if the
the front and back sides. During nighttime
transmission is shifted into reverse. This
driving, these sensors detect distracting
– CONTINUED –
English 
