3-87
Instruments and controls/Mirrors
manually folded slightly forward of the
work. This is not a malfunction. Oper-
! Power folding mirror switch (if
regularly unfolded position, when you
ate the switch again after waiting for a
equipped)
turn the ignition switch from the
short period of time.
“LOCK” (off) position to the “ACC” or
“ON” position, the outside mirrors may
automatically fold further forward de-
pending on the status of the power
folding mirror switch. When this hap-
pens, press the power folding mirror
switch. By doing so, the outside mir-
rors which have been folded to the
furthest forward position will extend to
the regularly unfolded position and
then fold rearward in the usual way. In
order to unfold the outside mirrors,
press the switch again.
The power folding mirror switch operates
. When you unfold the outside mirrors
only when the ignition switch is in the “ON”
manually, the mirrors may become
or “ACC” position.
wobbly. Be sure to unfold the mirrors
To fold the outside mirrors, press the
by switch operation. If the outside
power folding mirror switch. To unfold the
mirrors are still wobbly, fold the mirrors
mirrors, press the switch again.
again and then unfold them by switch
operation.
NOTE
. When the temperature is low, the
. If the outside mirrors have been
outside mirrors may stop during switch
operated (folded or unfolded) manually,
operation. If that occurs, push the
when you turn the ignition switch from
switch again. When the outside mirrors
the “LOCK” (off) position to the “ACC”
do not work by switch operation, move
or “ON” position, the outside mirrors
them several times manually. This
may be adjusted automatically depend-
makes it possible to operate them by
ing on the status of the power folding
switch operation.
mirror switch.
. When you operate the power folding
. If the outside mirrors have been
mirror switch continuously, it may not
English 
