3-74 Instruments and controls/Illumination brightness control
Illumination brightness con-
To darken, turn the control dial downward.
Headlight beam leveler (if
trol
equipped)
NOTE
. When the control dial is turned fully
& Automatic headlight beam
upward, the illumination brightness
leveler (models with HID
becomes the maximum and the auto-
headlights)
matic dimming function does not work
at all.
The HID headlights generate more light
. The brightness setting is not can-
than conventional halogen headlights.
celed even when the ignition switch is
Therefore a driver of an oncoming vehicle
turned to the “LOCK” (off) position.
may experience too much glare if your
headlight beam height adjustment is high
when the vehicle is carrying a heavy load.
The automatic headlight beam leveler
adjusts the headlight beam height auto-
matically and optimally according to the
load being carried by the vehicle.
The illumination brightness of the instru-
ment panel dims under the following
conditions.
. when the light switch is in the “
” or
“ ” position
. when the light control switch is in the
“AUTO” position and the headlights illumi-
nate automatically (models with auto on/
off headlights: Refer to “Headlights” F3-
71.)
You can also adjust the illumination bright-
ness for better visibility in the following
ways.
To brighten, turn the control dial upward.
English 
