Slow vehicle ahead.
Restricted visibility.
Strong winds.
Slippery road.
Adjustment options for traffic hazard alert
Switching the traffic hazard alert on and off
You can switch the traffic hazard alerts on and off in the Assist systems menu in the Infotainment system.
1. Activate or deactivate:
Or:
Driver assist settings Traffic hazard alert.
Activate or deactivate:
Driver assist settings Traffic hazard alert Active.
Switching traffic hazard alerts with information level on and off
You can adjust the settings so that you receive warnings only about critical hazards. For this, you must switch off the
traffic hazard alerts with information level status.
1. Activate or deactivate:
Driver assist settings Traffic hazard alert Information level.
Hiding a displayed traffic hazard alert
1. Press OK on the multifunction steering wheel.
Introduction to the topic
Mobile devices can be connected to the Infotainment system by cable and wireless connections present in the
vehicle.
The type and number of cable and wireless connections differ according to the vehicle equipment and country. The
connections may also be different within a model series or in special-edition models.
In the case of cable connections, use only the original device connecting cables or, if available, the factory-supplied
connecting cables for your vehicle.
If the plug on the connecting cable cannot be inserted, check the angle of insertion and the connections.
NOTICE
Use of unsuitable or damaged connecting cables and insertion of the plugs at the incorrect position or with great
force can lead to malfunctions and damage to the devices.
● Use only suitable and undamaged connecting cables.
● When inserting the plugs of the connecting cables into the appropriate connection, ensure that they are correctly
positioned and apply only light pressure. Applying too much pressure may damage both the unit connection and
the plug of the connecting cable.
● Make sure that the connecting cable is not pinched or sharply bent.
If a connected device is not recognised, disconnect all devices and connect the device again. If necessary,
check that the connecting cable you are using is working properly.
330
English 