2024-2026 Cupra Terramar SUV Driving User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving for Your Cupra Terramar SUV First Generation (2024-2026)

Driving
161
Driving indications
Driving
Driving indications
Pedals
●
Make sure that you can always press the ped-
als without any problems.
●
Ensure that the pedals can return unimpaired
to their initial positions.
●
Ensure that the oor mats are securely fas-
tened during the trip and do not obstruct the
pedals ››› .
Only use oor mats which leave the pedals
clear and which are secured to prevent them
from slipping. You can obtain suitable oor
mats from a specialised dealership. Fasteners
for oor mats are tted in the footwells.
Wear suitable footwear
Always wear shoes which support your feet
properly and give you a good feeling for the
pedals.
WARNING
●
Restricting pedal operation can lead to
critical situations while driving.
●
Never lay or t oor mats or other oor
coverings over the original oor mats. This
would reduce the pedal area and could ob-
struct the pedals. Risk of accident.
●
Never place objects in the driver footwell.
An object could move into the pedal area and
impair pedal operation.
Selecting the optimal gear
Depending on the equipment on the instru-
ment cluster display, a recommendation is
shown with the gear that should be engaged
to optimise consumption.
On vehicles with automatic transmission, it is
only displayed when driving in Tiptronic mode
›››
page179.
No recommendation will appear if the optimal
gear is engaged. The current gear will be dis-
played.
Display Meaning
3 Optimum gear.
4 5
Changing to a higher gear is
recommended.
2 1
Changing to a lower gear is
recommended.
Information regarding the “cleanliness” of
the particulate lter
When the exhaust system detects that the par-
ticulate lter is close to saturation, this system’s
self-cleaning function recommends the opti-
mal gear for that function ›››page336.
WARNING
The gear change recommendation is an aux-
iliary function and in no case should be a
substitute for careful driving.
●
Responsibility for selecting the correct
gear, depending on the circumstances, rests
solely with the driver.
For the sake of the environment
Selecting the correct gear can help to save
fuel.
Note
The recommended gear display turns o
when you are no longer in tiptronic mode.
Economical and environmentally
friendly driving
Fuel consumption, environmental pollution
and wear to the engine, brakes and tyres all de-
pend largely on driving style. Consumption can
be reduced between 10-15% with an eicient
162
Driving
driving style. The following section gives you
some tips on lessening the impact on the envi-
ronment and reducing your operating costs at
the same time.
Active cylinder management (ACT®)
Depending on vehicle equipment, the active
cylinder management (ACT®) may deactivate
some of the engine cylinders if the driving sit-
uation does not require too much power. The
number of active cylinders can be seen on the
instrument cluster display ›››page16.
Anticipation when driving
If you think ahead when driving, you will need
to brake less and thus accelerate less. Use the
vehicle's inertia whenever possible, with a gear
engaged. This takes advantage of the engine
braking eect, reducing wear on the brakes
and tyres. Emissions and fuel consumption will
drop to zero.
Changing gear to save energy
An eective way of saving is to change in ad-
vance to a higher gear.
Automatic transmission: accelerate gradually
and without reaching the “kick-down” posi-
tion.
Avoid driving at high speed
Avoid travelling at your vehicle’s top speed,
whenever possible. Fuel consumption, emis-
sion of harmful gases and noise pollution mul-
tiply as speed is increased. Driving at moderate
speeds will help to save fuel.
Reduce idling time
In vehicles with the Start-Stop system idling is
automatically reduced. In vehicles without the
Start-Stop system it is worth switching o the
engine, for example, at level crossings and at
traic lights that remain red for long periods of
time. When an engine has reached operating
temperature, and depending on the cylinder
capacity, keeping it switched o for a minimum
of about 5 seconds already saves more than
the amount of fuel necessary for restarting.
The engine takes a long time to warm up when
it is idling. Mechanical wear and pollutant emis-
sions are also especially high during this initial
warm-up phase. It is therefore best to drive
o immediately after starting the engine. Avoid
running the engine at high speed.
Regular maintenance
Regular servicing helps in saving fuel even be-
fore the engine is started. A well-serviced en-
gine gives you the benet of improved fuel
eiciency as well as maximum reliability and
an enhanced resale value. A badly serviced en-
gine can consume up to 10% more fuel than
necessary.
Avoid short journeys
The engine and catalytic converter need to
reach their optimal operating temperature in
order to minimise fuel consumption and emis-
sions.
A cold engine consumes a disproportionate
amount of fuel. The engine reaches its working
temperature after about four kilometres (2.5
miles), when fuel consumption will return to a
normal level.
Check tyre pressure
Always make sure the tyres are inated to the
correct pressures ›››page376 to save fuel.
If the pressure is half a bar too low, fuel con-
sumption may increase by 5%. Due to the
greater rolling resistance, under-ination also
increases tyre wear and impairs handling.
Do not use winter tyres all year round as they
increase fuel consumption by up to 10%.
Avoid carrying unnecessary loads
Given that every kilo of extra weight will in-
crease the fuel consumption, it is advisable
make sure that no unnecessary loads are being
transported.
Since the luggage rack increases the aero-
dynamic drag of the vehicle, you should
remove it when not needed. At speeds of
100-120km/h (62-75mph), this will achieve
fuel savings of 12%.
Driving
163
Driving indications
Save electrical energy
The engine drives the alternator, thereby gen-
erating electricity. This implies that any in-
crease in power consumption also increases
fuel consumption! For this reason, switch o
any unneeded electrical devices. Devices that
use a lot of electricity include the blower at a
high setting, the rear window heating or the
seat heating.
Plug-in hybrid drive: brake early and evenly to
take advantage of energy recovery.
Note
●
If you have the Start-Stop system, it is rec-
ommended that it should not be disconnec-
ted.
●
It is recommended that you close the win-
dows when driving at more than 60km/h
(37mph).
●
Use the engine brake on downhills by
changing to the gear that is best suited for
the gradient. Fuel consumption will be “zero”
and the brakes will not suer.
Driving with a loaded vehicle
In order to achieve appropriate driving char-
acteristics when the vehicle is loaded, please
note the following:
●
Place all luggage securely ›››page314.
●
Accelerate with particular care and precau-
tion.
●
Avoid sharp braking and sudden manoeu-
vres.
●
Brake earlier than usual.
●
If applicable, please note the information
about the roof rack ›››page320.
WARNING
Loads that move around could seriously en-
danger the vehicle's stability and safety, ex-
tend the braking distance during hard or
emergency braking and lead to serious acci-
dents and injuries.
●
Secure the load correctly to prevent it from
moving around.
●
Secure heavy objects with suitable lashing
straps or tie-down belts.
●
Ensure that the rear seat backrests are se-
curely engaged.
Driving with the rear lid open
Driving with the rear lid open is particularly
dangerous. Secure all objects and the open
rear lid correctly and take any necessary meas-
ures.
Driving with the rear lid open increases the
aerodynamic drag of the vehicle, along with
fuel consumption. It is therefore recommen-
ded that you do not drive with the rear lid
open.
WARNING
Driving with the rear lid unlocked or open
can cause serious injury.
●
Always drive with the rear lid closed.
●
Place all objects securely inside the lug-
gage compartment. Otherwise, loose objects
could fall out of the luggage compartment
and injure road users driving behind.
●
Always drive carefully and with special care
and anticipation.
●
Avoid braking and sudden manoeuvres, as
the open rear lid could move uncontrollably.
●
When transporting objects that protrude
from the luggage compartment, mark them
accordingly to warn other road users. Please
bear in mind all legal provisions.
●
Never use the rear lid to support or secure
objects protruding from the luggage com-
partment.
●
If a luggage rack is tted on the rear lid, re-
move it and the load when you have to drive
with the rear lid open.
164
Driving
NOTICE
An open rear lid changes the height and, in
some cases, the length of the vehicle.
Note
Depending on the country, it may be forbid-
den to drive with the rear lid open. Please
observe the legal regulations of the country
in question.
Driving on ooded roads
To prevent damage to the vehicle driving on
ooded roads, take the following into account:
●
Water should never come above the lower
edge of the bodywork.
●
Drive at pedestrian speed.
●
Never stop the vehicle in the water, drive in
reverse or stop the engine.
●
Vehicles driving in the opposite direction
form waves that can raise the water level so
high that your vehicle will not be able to cross
the water safely.
WARNING
After driving through ooded zones, braking
eectiveness can decrease if the brake discs
or pads are damp ›››page187.
Note
●
Driving through ooded areas may severely
damage vehicle components such as the en-
gine, drive train or electrical system.
●
Avoid driving through salt water (corrosion)
›››
page394.
●
Whenever driving through water, the
Start-Stop system must be switched o
›››
page175.
Running in
Please observe the instructions for running-in
new components.
Running-in the engine
A new engine must be driven through a
run-in period during its rst 1500kilometres
(1000miles). During its rst few hours of
running, the internal friction in the engine is
greater than later on when all the moving parts
have bedded down.
How the vehicle is driven for the rst 1500km
(1000miles) inuences the future engine per-
formance. Throughout the life of the vehi-
cle, it should be driven at a moderate speed
(especially when the engine is cold) to re-
duce engine wear and increase its useful life.
Never drive at extremely low engine speeds.
Always engage a lower gear when the engine
works “irregularly”. For the rst 1000km or
600miles, please note:
●
Do not use full throttle.
●
Do not force the engine above two thirds of
its maximum speed.
●
Do not tow a trailer.
Between 1000 and 1500kilometres (600 to
1000miles), gradually increase power until
reaching the maximum speed and high engine
speeds.
Running in new tyres and brake pads
●
Replacement of wheel rims and new tyres
›››page375.
●
Information about brakes ›››page187.
For the sake of the environment
If the engine is run in gently, the life of the
engine will be increased and the engine oil
consumption reduced.
Four-wheel drive (4Drive)
On four-wheel drive models, the engine power
is distributed to all four wheels
General notes
On four-wheel drive vehicles, the engine
power is distributed to all four wheels. The dis-
tribution of power is controlled automatically
according to your driving style and the road
conditions. See also ›››
page189.
Driving
165
Driving indications
The four-wheel drive is specially designed to
complement the higher engine power. This
combination gives the vehicle exceptional
handling and performance capabilities, both
on normal roads and in more diicult condi-
tions, such as snow and ice. Even so (or per-
haps especially for this reason), it is important
to observe certain safety points ››› .
Winter tyres
Thanks to four-wheel drive, your vehicle will
have plenty of traction in winter conditions,
even with the standard tyres. Nevertheless, we
still recommend that winter tyres or all-season
tyres be tted on all four wheels to give an even
better braking response.
Snow chains
On roads where snow chains are mandatory,
this also applies to cars with four-wheel drive
›››page379.
Changing tyres
On vehicles with four-wheel drive, all four tyres
must have the same rolling circumference.
Also avoid using tyres with varying tread depths
›››page375.
O-roader?
Your CUPRA vehicle is not an o-roader: it
does not have enough ground clearance to be
used as such. Avoid rough tracks and uneven
terrain.
WARNING
●
Even with four-wheel drive, you should al-
ways adjust your speed to suit the conditions.
Do not let the extra safety features tempt you
into taking any risks when driving. Accident
hazard!
●
The braking capability of your vehicle is
limited by the tyres' grip. It is therefore
no dierent from a car without four-wheel
drive. So do not be tempted to drive too fast
on rm or slippery roads just because the
vehicle still has good acceleration in these
conditions. Accident hazard!
●
On wet roads bear in mind that the front
wheels may start to “aquaplane” and lose
contact with the road if the car is driven
too fast. If this should happen, there will be
no sudden increase in engine speed to warn
the driver, as occurs with a front-wheel drive
car. For this reason you should always choose
a driving speed suitable for the road condi-
tions. Accident hazard!
Trips abroad
The vehicle has been manufactured for a spe-
cic country and meets the approval regula-
tions in force in that country at the time it was
manufactured.
If you are going to use the vehicle abroad tem-
porarily or for a short period of time, please
observe the relevant instructions.
Some countries have special safety regulations
and provisions that the vehicle may not comply
with. Before travelling abroad, CUPRA recom-
mends that you seek information from one of
your dealers about the legal provisions in force
in your destination country.
If you are going to sell the vehicle in another
country or use it there for a longer period of
time, please observe the legal regulations in
force in the country in question.
In some cases it may be necessary to install or
remove certain equipment at a later date, and
to deactivate certain functions. Sets and types
of services may also be aected. In particular,
this can occur if the vehicle is to be used in an-
other climatic region for a long period of time.
Due to the dierent frequency bands around
the world, the factory-tted infotainment sys-
tem may not work in another country.
With petrol vehicles, it should be ensured that
lead-free petrol is available throughout the
journey. Seek information about service sta-
tion networks selling unleaded fuel.
166
Driving
Due to the dierent technical standards that
exist, it may not be possible to charge the
high-voltage battery at charging stations in
other countries, or it may only be possible with
a suitable charging cable. You can get more
information from a specialised CUPRA dealer
or any SEAT network dealer.
WARNING
As altitude increases, air density decreases.
Due to the reduced air density, engine per-
formance may be reduced and vehicle com-
ponents may be damaged during prolonged
operation at very high altitudes. Reduced en-
gine power can lead to accidents and serious
or fatal injuries, e.g. when overtaking.
●
Before travelling abroad, especially at alti-
tudes above 3,000m (approx. 9,843ft) above
sea level, please contact a specialised CUPRA
dealer or any dealer in the SEAT network for
more information.
NOTICE
●
CUPRA cannot be held liable for any dam-
age to the vehicle due to insuicient work or
lack of availability of genuine spare parts.
●
CUPRA accepts no liability if the vehicle
does not meet the legal requirements in
force in other countries and continents, or
if it only partially meets them.
Starting and stopping the
engine.
Switching the ignition on/o
Fig.115 On the steering wheel: start
button.
The engine can be started with a start button
(Press & Drive). For this there must be a valid
key inside the vehicle interior.
Opening the driver's door when exiting the ve-
hicle activates the electronic lock on the steer-
ing column if the ignition is switched o. For
vehicles with automatic transmission, the col-
umn will only be locked if the parking lock P is
activated.
Switching the ignition on/o
If you only want to switch on the ignition (with-
out starting the engine):
●
Vehicles with automatic gearbox: briey
press the start button once without pressing
the brake pedal ››› .
Automatic ignition disconnection
When the vehicle detects that there is no
driver once the engine has stopped, after a
certain time the ignition is switched o au-
tomatically. If at that time the dipped beam
headlights are on, the side lights will stay on
for approx. 30 minutes. The side lights can be
turned o by locking the vehicle ›››page106,
or manually ›››page131.
Automatic deactivation of the ignition on
vehicles with the Start-Stop system
The ignition is switched o automatically when
the vehicle is stopped and the automatic en-
gine shutdown is active, if:
●
the driver's seat belt is not fastened,
●
the driver does not step on any pedal,
●
the driver's door is opened.
After automatically turning o the ignition, if
the dipped beam is on, the side light re-
mains on for approx. 30 minutes (if the battery
has enough charge). If the driver locks the ve-
hicle or manually turns o the light, the side
light goes out.
Driving
167
Starting and stopping the engine.
Switching o the ignition when leaving the
vehicle, with hybrid drive
When the ignition is not switched o in E-
MODE operating mode, a certain amount of
time after the journey is complete it switches
o automatically to prevent draining the 12-
volt vehicle battery.
Breath alcohol ignition interlock device
(breathalyser)
The vehicle is ready for the installation of
a breath alcohol ignition interlock device
(breathalyser with LIN communication).
After installing a breath alcohol ignition inter-
lock device, it will always be necessary to pass
a breathalyser test before the ignition can be
switched on.
Some vehicle functionalities may be limited.
WARNING
When switching on the ignition, do not press
the brake pedal, otherwise the engine could
start immediately.
WARNING
If vehicle keys are used negligently or without
due care, this may cause accidents and seri-
ous injury.
●
Never leave any key inside the vehicle
when you leave it. Otherwise, a child or unau-
thorised person could lock the vehicle, start
the engine or connect the ignition and oper-
ate any of the electrical equipment.
Note
●
Before leaving the vehicle, always discon-
nect the ignition and, if appropriate, take into
account the instructions on the dash panel
screen.
●
If the vehicle is stationary for a long time
with the engine o and the ignition on, the
vehicle battery might be discharged and it
might not be possible to start the engine.
●
If during the STOP phase you press the
button, the ignition is switched
o.
Starting the engine
●
Vehicles with automatic transmission: press
the brake pedal and keep it pressed in this po-
sition until the engine starts.
●
Press the start button without pressing the
accelerator. There must be a valid key in the
vehicle for the engine to start.
●
If the engine does not start, stop and wait
for around 1 minute to try again. If necessary,
perform an emergency start ›››page169.
WARNING
Do not keep the engine running in conned
spaces, as there is a risk of poisoning.
●
The exhaust gases contain carbon monox-
ide, an odourless and colourless poisonous
gas that can cause loss of consciousness and
death.
WARNING
Do not get out of the vehicle with the engine
running, especially if a gear is engaged. The
vehicle could then suddenly move or some-
thing strange could happen that would cause
damage, re or serious injury.
WARNING
Never use cold start sprays, they could ex-
plode or cause the engine to run at high revs.
Doing this risks injury.
168
Driving
NOTICE
●
The starter motor or the engine may be
damaged if you try to restart the engine im-
mediately after switching it o.
●
When the engine is cold, you should avoid
high engine speeds, driving at full throttle
and over-loading the engine, as this could
cause engine damage.
For the sake of the environment
Do not warm-up the engine by running the
engine with the vehicle stationary. Start o
immediately, driving gently. This helps the
engine reach operating temperature faster
and reduces emissions.
Note
Electrical components with a high power
consumption are switched o temporarily
when the engine starts.
●
When starting with a cold engine, noise
levels may briey increase. This is quite nor-
mal, and no cause for concern.
Turning o the engine
●
Bring the vehicle to a full stop ››› .
●
Vehicles with an automatic gearbox: Switch
on the parking lock by pressing button P.
●
Apply the electronic parking brake.
●
Briey press the start button.
Car wash function (hybrid vehicles)
When the ignition is turned o with gear N ac-
tivated, the vehicle can roll for the next 30 mi-
nutes. After that time, if the vehicle is stopped
the parking lock P activates automatically. The
corresponding warning message is displayed
on the instrument cluster display one minute
before this happens.
WARNING
Never switch o the engine while the vehicle
is in motion. This could cause loss of control
of the vehicle, accidents and serious injury.
●
The airbags and seatbelt pretensioners do
not work when the ignition is switched o.
●
The brake servo does not work when the
engine is switched o. Therefore, when the
engine is switched o, the brake pedal has to
be pressed harder to stop the vehicle.
●
The power steering does not work when
the engine is switched o. When the engine
is switched o, more force is required to turn
the steering wheel.
●
If the ignition is switched o, the steering
column lock may activate, leaving the vehicle
impossible to control.
WARNING
Always take the key with you when leaving
the vehicle. This is particularly important if
there are children in the vehicle, as they
might otherwise be able to start the engine
or use power-operated equipment (e.g. the
electric windows), which could cause injuries.
NOTICE
●
If the vehicle is stopped and the Start-Stop
system switches o the engine, the ignition
remains switched on. Before leaving the ve-
hicle, make sure that the ignition is switched
o, otherwise the battery will discharge.
●
If the engine has been driven at high speed
for a prolonged period of time, it may over-
heat when switched o. To avoid damage, al-
low the engine to run for approximately two
minutes in neutral before switching it o.
Note
After stopping the engine, the radiator fan
may continue to run for up to 10 minutes,
even with the ignition switched o. It may
also start up again if the coolant tempera-
ture rises due to heat building-up under the
engine compartment or if the engine gets
even hotter due to prolonged exposure to
sunlight.
Driving
169
Starting and stopping the engine.
Electronic immobilizer
The electronic immobiliser helps to prevent
the engine from being started with an unau-
thorised key and, consequently, the vehicle
being put in motion.
The vehicle key has an integrated chip which
automatically deactivates the electronic im-
mobiliser if there is a valid key inside the vehi-
cle interior.
The electronic immobiliser is automatically ac-
tivated when there is no longer a valid key in-
side the vehicle.
For this reason, the engine can only be star-
ted with a correctly coded Original CUPRA key.
This type of key can be purchased from a spe-
cialised CUPRA dealer or any SEAT network
dealer.
NOTICE
The correct operation of the vehicle is only
guaranteed with original CUPRA keys.
Emergency starting function
Fig.116 On the centre console: emergency
start.
If no valid key is detected inside the vehicle,
an emergency start-up will be required. The
relevant message will appear in the dash panel
display. This may happen when, for example,
the vehicle key battery is very low.
●
Immediately after pushing the start button,
place the key in the drink holder of the centre
console ›››Fig.116, as close as possible to the
Kessy logo.
●
The ignition connects and the engine starts
automatically.
Indications for the driver on the in-
strument cluster display
Press the brake
●
This message appears on vehicles with an
automatic gearbox if the driver tries to start the
engine without pressing the brake pedal.
Press the brake to engage a gear
●
This indication is displayed when starting or
stopping the engine if the automatic transmis-
sion selector lever is in position D or R and the
brake pedal is not depressed. The engine can
only be started and stopped in these positions.
Engage position P; the vehicle can move;
doors can only be locked in position P.
●
For safety reasons, this driver message ap-
pears and an audible warning sounds if the
parking lock button P is not pressed after
switching o the engine. Press button P other-
wise the vehicle could move.
Ignition is switched on
●
This driver message is displayed and a buz-
zer sounds when the driver's door is opened
with the ignition switched on.
170
Driving
Driving with electric drive
Switching on the hybrid drive sys-
tem
✓ Valid for: hybrid vehicles
Switching on the hybrid drive activates the ve-
hicle's propulsion system. When the vehicle’s
drive system is switched on, the electric drive
is activated. The combustion engine starts au-
tomatically when the charge level of the high-
voltage battery is not suicient to run with the
electric drive, or if high drive power is required.
To access driving with the electric drive in the
infotainment system:
●
Select: > Charging > Battery Manager.
Requirements for switching on the drive sys-
tem
The drive system can be switched on when the
following conditions are met:
●
The high voltage battery has a suicient
charge level.
●
There is no charging cable plugged in.
●
The temperature of the high-voltage battery
is within the operating range.
●
There is a valid remote control key in the ve-
hicle.
Switching on the drive system
●
Press the ignition and start button once. The
ignition must be switched on.
●
Press the brake pedal and hold it down.
●
Set the gear selector switch to position N or
activate the parking lock P.
●
Press the ignition and start button until in-
dicator lamp lights up on the instrument
cluster. Do not press the accelerator. Release
the ignition and start button when the indica-
tor lamp lights up on the instrument clus-
ter. The mark on the power display changes
from to 0.
●
If the indicator lamp does not light up,
cancel and repeat the operation.
●
If the vehicle has been locked with the re-
mote control key, the ignition and start but-
ton is deactivated. If you are inside the vehi-
cle and have to start the engine, rst unlock
the vehicle or perform an emergency start
›››page169.
Note
A click is heard when the drive system is
turned on. This is completely normal and
does not mean there is a problem.
Detecting the drive system
With the electric drive, the motor makes no
noticeable noise when the drive system is
switched on or while driving. Therefore, you
cannot detect that the vehicle's drive system
is on by engine noise. Instead, the following
characteristics show that the vehicle is ready to
drive:
●
The indication 0 ›››page21 is displayed on
the power gauge of the instrument cluster.
●
The display light on the instrument cluster is
on, regardless of whether the vehicle’s exterior
lighting is on.
●
The indicator lamp is on in the instru-
ment cluster display.
●
An audible signal is heard.
Switching on the drive system in very low
outside temperatures
If the outside temperature is very low (approxi-
mately -27°C (-16°F) or lower), the high-voltage
battery may freeze and stop working. In this
case it's not possible to switch on the drive
system.
As soon as the temperature of the high-volt-
age battery has increased enough, the drive
system can be switched on again.
To ensure that the drive system can be
switched on, even in very low outside tempera-
tures, CUPRA recommends parking the vehicle
in a place protected from the cold.
Behaviour when moving o or stopping
The combustion engine only runs if necessary.
When the vehicle is stationary, the combus-
tion engine is normally switched o and the
Driving
171
Driving with electric drive
vehicle’s electrical systems are powered by the
high-voltage battery. The rev counter on the
instrument cluster remains at 0 ›››page21.
The combustion engine switches o in certain
driving conditions. This is normal and aims to
save fuel. In general, the power steering and
brake assist systems remain on. In isolated ca-
ses the system may require the combustion
engine to carry on running even when the ve-
hicle is stationary.
In traic jams the combustion engine may start
up while the vehicle is stationary to recharge
the high voltage battery for subsequent driving
o and stopping phases.
172
Driving
1)
The displayed symbol varies depending on the active operating mode and the charge level of the high-voltage battery.
Operating mode selection
✓ Valid for: hybrid vehicles
Fig.117 In the infotainment system: Battery
manager menu
The vehicle has dierent operating modes so
that it can always be optimally adjusted to ev-
ery situation while driving. Once the drive sys-
tem has been turned on, and provided that all
of the operating conditions required for this
purpose have been met, the Electric mode
operating mode is always activated in the rst
instance for electric driving.
Operating mode selection
●
Switch on the drive system.
●
Access the Battery manager menu of the
infotainment system ( > Charging > Battery
manager).
●
Select Electric Mode or Hybrid Mode in
the infotainment system. Further information
about the operating mode can be found in
›››Fig.117
4
.
Electric mode
(driving in electric mode)
1)
In electric mode, the vehicle basically drives in
electric only mode. To the extent possible, the
vehicle's combustion engine is not used.
All of the following conditions must be met for
the Electric mode to be activated:
●
The high voltage battery has a suicient
charge level.
●
The vehicle speed is lower than 130 km/h
(80 mph).
●
The high voltage battery temperature is
above -10°C.
If, while driving in Electric mode, the necessary
conditions are no longer met, the combustion
engine starts and electric driving is suspended.
In this case, the indicator
lights up on the
instrument cluster display.
Driving
173
Driving with electric drive
1)
The displayed symbol varies depending on the active operating mode and the charge level of the high-voltage battery.
1
2
3
The combustion engine starts when a kick-
down occurs in Electric mode. However, Elec-
tric mode remains on.
Hybrid mode
(use the battery's charge)
1)
This is the operating mode that allows you to
save most fuel.
The operating mode control unit tries to make
the most of the battery charge. For this pur-
pose, with active directions the navigation data
are also accessed.
In this operating mode, the electric motor and
the combustion engine share the work of driv-
ing the vehicle.
In hybrid operating mode, the power from
the battery charge is used optimally. If route
guidance is activated, the vehicle may auton-
omously recharge the high-voltage battery us-
ing the combustion engine.
Manual control of the battery charge
Manual control of the battery charge is only
possible in Hybrid mode. The option selected
by the user is only valid until the ignition is
switched o or the vehicle is switched to Hy-
brid mode or Electric mode.
Key to ›››
Fig.117:
The horizontal bar can be used to select a
lower theoretical charge level of the high
voltage battery. The system does not al-
low the selection of a higher charge level
than the one that is displayed. The vehicle
only uses the battery's charge when it is
above the selected theoretical charge
level. The rest is kept until the end of the
journey.
Maintaining the battery level
. The
high-voltage battery charge level is kept at
around the current level while driving. If
you accelerate harder or increase the ve-
hicle speed, the combustion engine starts
up. When permitted by the driver’s de-
mand for acceleration and the vehicle
speed, the vehicle switches back to elec-
tric mode.
CUPRA recommends using the charging
socket to charge the high-voltage battery,
whenever possible ›››page81.
Adjust the recuperation level. Allows you
to select between dierent levels of recu-
peration: Smooth, Auto or Strong. If there
is no active route, the system will oer the
activation of a predictive route to run in a
more eicient hybrid mode.
Smooth: In this mode recuperation is low.
The level of recuperation can be adjusted
in combination with the gear shift, using
the steering wheel paddles.
Auto: In “ECO” and “Comfort” driving
modes, recuperation is generally smooth,
although it can be strong, depending on
the driving situation. If the “Cupra” or
“Performance” driving mode is selected,
recuperation will be strong. The level of
recuperation can be adjusted in combina-
tion with the gear shift, using the steering
wheel paddles.
Strong: The vehicle recuperates as much
energy as possible, depending on the sit-
uation. If the brake pedal is depressed, the
vehicle also recovers energy through the
high-voltage system. If the recuperation
level is Strong, the brake lights will also
light up to indicate that the vehicle is de-
celerating.
For the most eicient driving possible, we
recommend activating the eiciency as-
sistant ›››page203, driving in “ECO”
driving mode, setting the gear shift to D
and the recuperation mode to Auto.
WARNING
Medium and strong energy recuperation can
cause loss of traction and skidding, particu-
larly on slippery roads. This can lead to loss of
control of the vehicle, accidents and serious
injuries.
●
Only activate the high recuperation level if
visibility, weather, road and traic conditions
permit, and if other road users are not at risk
due to your vehicle's deceleration behaviour
and driving style.
174
Driving
WARNING
The higher the charge level of the high-volt-
age battery, the lower the braking eect of
the engine, to the extent that there may be
no braking eect due to recuperation. This
can change the behaviour of the vehicle,
which can lead to accidents and serious or
fatal injuries.
●
Do not fully charge the high-voltage bat-
tery at high altitude, such as at the top of a
mountain pass, to allow the use of the recu-
peration braking eect when driving down-
hill.
●
Reduce speed before driving on a steep
gradient.
●
Reduce the vehicle’s speed by using the
vehicle brakes when driving on a steep gradi-
ent.
●
Note that there is a higher load on the ve-
hicle’s brakes if there is no engine braking
eect.
Show the active operating mode
The operating mode active at any given time
is displayed on the instrument cluster display,
e.g. .
WARNING
Switching to a dierent operating mode
while driving can distract you from traic
conditions and cause accidents.
Note
Information about the operating mode that
is currently active is displayed on the instru-
ment cluster display, along with the charge
level of the high-voltage battery.
Vehicle sound
✓ Valid for: hybrid vehicles
The electric drive makes much less noise than
a combustion engine. In the versions for some
countries, articial vehicle sound is generated
to allow the vehicle to be heard better from
the outside. At higher speeds, when the noise
produced by the tyres and the wind increases,
the vehicle's sound automatically fades out.
WARNING
During electric driving, the auditory percep-
tion of the vehicle by other road users may
be much lower. This is especially true in traf-
c-restricted areas and when manoeuvring
or reversing. Accident hazard!
Troubleshooting
✓ Valid for: hybrid vehicles
Drive: Fault! Stop the vehicle safely
The warning lamp lights up red.
There is a fault in the vehicle’s drive system.
The vehicle's drive system is no longer availa-
ble. Park the vehicle in a safe place as soon as
possible. Seek professional assistance.
Drive: Fault! The electric drive is not
working properly. Visit a workshop
The warning lamp lights up yellow.
There is a fault in the vehicle’s drive system.
Drive slowly to a specialised workshop to have
the fault repaired.
Drive: Warning! Power is limited. Check
the manual
The warning lamp lights up yellow.
Performance limited. The high-voltage battery
may not be suiciently charged or may have
reached its operating temperature limit, for ex-
ample in very cold outside temperatures.
Vehicle sound: Fault! Pedestrians can-
not hear the vehicle. Visit a workshop
The warning lamp lights up yellow.
There is a vehicle sound fault. Drive with ut-
most care, as other road users may not be able
to hear the electric vehicle. Go immediately
to a specialised workshop to have the fault re-
paired.
Driving
175
Start-Stop system
1)
In the mHEV version (semi-hybrid), above 20 km/h.
System power limited
The warning lamp lights up yellow.
A warning text accompanied by an audible
warning is displayed on the instrument cluster.
System power is limited as it is not possible to
use the combustion engine.
●
The available power can be monitored on
the instrument cluster ›››page21.
●
If the combustion engine cannot be started
due to lack of fuel (empty tank), refuel as soon
as possible. If the charge level of the high-volt-
age battery is low and it is not possible to use
the combustion engine, the vehicle will be im-
mobilised.
As soon as the combustion engine is available
again, the warning light on the instrument clus-
ter will go out.
Electric Mode is not available
The indicator lamp lights up in white.
The electric mode (driving in electric mode)
cannot be used temporarily because one or
more conditions are not met.
●
Meet the conditions for using the Electric
mode ›››page170.
Start-Stop system
Description and operation
Not valid for PHEV hybrid vehicles
The Start-Stop system helps you to save fuel
and reduce CO
2
emissions.
In Start-Stop mode, the engine will automati-
cally switch o when the vehicle stops or is
stopping. The ignition remains switched on.
The engine automatically switches back on
when required.
When the ignition is switched on, the Start-
Stop function is automatically activated.
Indicator lamps
The Start-Stop system is available, the
automatic engine shutdown is active.
The Start-Stop system is not available or
has been disconnected.
Stopping and starting the engine
●
Brake until the vehicle has come to a stand-
still, and keep your foot on the brake pedal or
activate the Auto Hold function so that the ve-
hicle remains braked. The engine will stop. The
warning lamp
will appear on the display. The
engine may stop before the car stops com-
pletely (approximately 7 or 2 km/h depending
on the vehicle's gearbox
1)
).
●
When you take your foot o the brake pedal
the engine will start up again. The indicator
lamp goes out. When the Auto Hold system is
active, the engine will not start if you remove
your foot from the brake pedal. The car starts
when you press the accelerator pedal.
Basic requirements for the start/stop mode
●
The driver door must be closed.
●
The driver's seat belt must be fastened.
●
The bonnet must be closed.
●
The engine has reached operating tempera-
ture.
●
The reverse gear must not be engaged.
●
The vehicle must not be on a very steep
slope.
The engine does not turn o for various rea-
sons
Before stopping the vehicle, the system veri-
es whether certain conditions are met. The
engine does not switch o, in the following
situations for example:
176
Driving
1)
Except for the MHEV version.
●
The engine has not yet reached the required
temperature for the Start-Stop mode.
●
The temperature selected on the climate
control has not been reached.
●
If maximum (HI) or minimum (LO) tempera-
ture is requested in the air conditioner.
●
De-icing function button activated.
●
Park assist is switched on.
●
The battery is very low.
●
The steering wheel is overly turned or is be-
ing turned.
●
If there is a danger of misting.
●
After engaging reverse gear.
●
In case of a very steep gradient.
●
In a traic jam after stopping for the fth
time, the engine will not stop any more.
●
With ESC disabled.
●
After emergency braking or loss of adhesion.
●
With a trailer attached.
●
While the particle lter is regenerating.
The instrument cluster screen displays .
The engine starts by itself
When stopped, the normal system mode may
be interrupted in the following situations. The
engine restarts without the driver's interven-
tion.
●
The interior temperature diers from the
temperature selected on the climate control.
●
Defrost function button activated .
●
The brake is pressed several times in a row.
●
The battery is not charged enough.
●
High electricity consumption.
●
The vehicle rolls forward or backward with
the engine o.
●
ESC deactivated.
●
With automatic gearbox:The accelerator
pedal is depressed.
●
The steering wheel is turned slightly.
1)
●
When the air conditioning is activated.
●
Exhaust system temperature is too low.
Additional information related to the auto-
matic gearbox
The engine stops when the selector lever is in
D, N and S, as well as in Tiptronic mode. When
the parking lock button P is activated, the en-
gine will also remain o when you remove your
foot from the brake.
In MHEV vehicles the stop does not occur in S
or in Tiptronic mode.
In order to start the engine up again the ac-
celerator must be pressed, or another gear en-
gaged or the brake released.
If the selector lever is placed in R while stop-
ped, the engine will start up again.
Additional information about vehicles with
Adaptive Cruise Control (ACC)
In vehicles with ACC function, the engine will
start up again in certain operating conditions
if the radar sensor detects that the vehicle
ahead drives o again.
WARNING
●
Never switch the engine o until the vehi-
cle is stationary. The operation of the brake
and steering will not be fully guaranteed.
More force will be needed to turn the steer-
ing wheel or to brake. You could suer an
accident and even serious injuries.
●
To avoid injury, make sure that the Start-
Stop system is switched o when working in
the engine compartment ›››page177.
NOTICE
The Start-Stop system must always be
switched o when driving through ooded
areas ›››page164.
Driving
177
DSG automatic transmission
Note
●
In vehicles with an automatic gearbox,
you can control whether the engine should
switch o or not by reducing or increasing
the brake force applied. While the vehicle re-
mains stopped, the engine will not stop if the
brake pedal is slightly pressed, in traic jams
with frequent stopping and starting for ex-
ample. As soon as strong pressure is applied
to the brake pedal, the engine will stop.
●
When stopped, the brake pedal must be
kept pressed to ensure that the vehicle does
not move.
●
If the lever is placed in position D, N or S af-
ter engaging reverse gear, 10km/h (6mph)
in a forwards direction must be reached for
the system to be in a condition to stop the
engine.
Manually connecting and discon-
necting the Start-Stop system
Not valid for PHEV hybrid vehicles
Fig.118 In the infotainment system: Start-
Stop system (accessible from dierent
infotainment menus).
›››
Fig.118:
System disconnected.
System connected.
If you do not wish to use the system, you can
switch it o manually:
●
In the infotainment system select > Assis-
tants > Smart Assistants.
Note
When the ignition is switched on, the Start-
Stop system activates automatically.
Troubleshooting
Not valid for PHEV hybrid vehicles
Indications for the driver on the instrument
cluster screen
A warning will be displayed whenever there is
an error or the Start-Stop system is switched
on/o.
“Start the engine manually”
●
This indication shows that the Start-Stop
system cannot restart the engine.
This happens for 2 reasons: if the driver's door
has been opened or if the driver has unbuck-
led the seat belt.
“Start-Stop system: Fault! Function not
available”
●
There is a fault in the Start-Stop system. Take
the vehicle to a workshop to have the fault re-
paired.
DSG automatic transmis-
sion
Introduction
Your vehicle is equipped with an electronically
controlled manual gearbox. Torque between
the engine and the gearbox is transmitted via
two independent clutches. They replace the
178
Driving
torque converter found on conventional auto-
matic gearboxes and allow for smooth, unin-
terrupted acceleration of the vehicle.
The Tiptronic system allows the driver to
change gears manually ›››page179, Chang-
ing gear in Tiptronic mode.
Gear selector positions
Fig.119 On the centre console: selector
lever.
The gear selector position is shown by the
corresponding sign lighting up. The engaged
gear is also displayed on the screen in manual
shift positions M, D, S and E (when the Eco
›››
page185 engine setting is selected in the
Individual prole).
- Parking lock
When the P button is pressed, the drive wheels
are locked. Only press P when the vehicle is
stationary ››› .
To press the P button you must press the brake
pedal simultaneously.
– Reverse gear
Reverse gear must be engaged only when the
vehicle is stationary and the engine is idling
››› .
To engage reverse gear R, you must press the
brake pedal simultaneously. The reverse lights
switch on when the reverse gear R is selected
and the ignition is on.
– Neutral
In this position, the gear is in neutral.
Press the brake pedal to move the lever from
N to D/S when the vehicle is stationary or at
speeds below 3km/h (2mph) ››› .
– Permanent forward drive position
The D/S position enables the gears to be op-
erated in normal mode (D) or sport mode (S).
To select Sport mode S, move the lever back-
wards. Pushing the lever again will select nor-
mal mode D. The selected driving mode is dis-
played on the instrument cluster display.
In normal mode (D), the gearbox selects the
best gear ratio. This depends on the engine
load, speed and the dynamic regulation pro-
gram (DRP).
Sport mode(S) should be selected for a sporty
driving style. This setting makes use of the en-
gine's maximum power output. When acceler-
ating, gear shifting operations are perceptible.
Under certain circumstances (e.g. on moun-
tain roads) it can be advantageous to switch
to tiptronic mode ›››page179, to adapt the
gears to suit the road conditions.
WARNING
●
Take care not to press the accelerator
pedal when the vehicle is stopped. The vehi-
cle could start moving immediately (in some
cases even if the parking brake is engaged)
resulting in the risk of an accident.
●
Never move the lever to position R when
driving. Failure to follow this instruction
could result in an accident or failure.
●
With lever in any position, the foot brake
must be depressed whenever the engine is
running. This is because an automatic gear-
box still transmits power even at idling speed.
●
Do not accelerate while selecting a gear,
with the car stationary and the engine run-
ning. Failure to follow this instruction could
result in an accident.
Driving
179
DSG automatic transmission
●
The driver must never leave the vehicle
while the engine is running and with a gear
engaged. Switch on the electronic parking
brake and select the parking lock (P).
Note
●
If the lever is moved accidentally to N when
driving, release the accelerator and let the
engine speed drop to idle before selecting
gear range D or S again.
●
If the power supply is interrupted while the
P parking lock is active, it will not be possible
to move the lever. If this should happen the
manual release can be used. In this case, you
should seek professional assistance.
Note
●
If a gear has been selected, the vehicle
does not move forwards or back. Proceed to
the next mode:
–
If the vehicle does not move in the
desired direction, the gear ratio may not
be correctly engaged by the system. De-
press the brake pedal and reselect the gear
range.
–
If the vehicle still does not move in the
desired direction, there is a system failure.
Seek specialist help and have the system
checked.
Changing gear in Tiptronic mode
Fig.120 Steering wheel: automatic gearbox
levers
Tiptronic gives the driver the option to change
gears manually.
When you change to the Tiptronic pro-
gramme, the vehicle remains in the currently
selected gear. This is possible as long as the
system is not changing gear automatically due
to a traic situation.
Using Tiptronic with the steering wheel pad-
dles
The gear shift paddles can be used when the
selector lever is in the D/S position.
●
Press the
+
gear shift paddle to change up a
gear ›››
Fig.120.
●
Press the
–
gear shift paddle to change
down a gear.
●
To exit the Tiptronic mode, pull the right-
hand gear shirt paddle towards the steering
wheel for approximately 1 second.
To keep Tiptronic mode permanently switched
on, move the selector lever to the S position.
If the selector lever is in position D and the
gear shift paddles are not operated for some
time, the Tiptronic mode will automatically be
switched o.
NOTICE
●
When accelerating, if a higher gear is not
selected, it will automatically change shortly
before reaching the maximum permitted
RPM.
●
Also, if a lower gear is selected, the system
will not change until it detects that the en-
gine will not reach its maximum RPM.
Driving with an automatic gearbox
Shifting to a higher or lower gear is automatic.
The engine can only be started with the lever in
the N position and the P button must be lit up
(the parking lock remains active).
Driving downhill
Under certain circumstances it may be advan-
tageous to use the Tiptronic mode to select
the gear manually according to driving condi-
tions ››› .
180
Driving
Stop/Park
To park on at ground, just press the P
›››Fig.119 button. On slopes the parking
brake should rst be applied and then press
the P button.
If the driver door is opened and the P but-
ton has not been activated, the vehicle could
move. The following warning is displayed on
the instrument panel: Gear change: Selec-
tor lever in the drive position!. A buzzing
sound is also heard.
Stopping on a downhill
Always apply the brake pedal rmly to prevent
the vehicle from moving; if necessary, apply
the electronic parking brake ››› .
Do not accelerate while a range of gears is en-
gaged to prevent the car from rolling downhill
››› .
Starting o uphill with the Auto Hold func-
tion
●
Once you have engaged a gear, take your
foot o the brake pedal and gently press the
accelerator.
Starting o uphill without the Auto Hold
function
●
Once you have engaged a gear, take your
foot o the brake pedal and gently press the
accelerator. The Hill Hold Control (HHC) will
keep the vehicle braked for a few seconds to
prevent the vehicle from rolling backwards and
give the driver time to move o.
WARNING
Observe the safety warnings ››› in Gear
selector positions on page178.
●
Never allow the brake to rub and do not use
the brake pedal too often or for long peri-
ods, as the brakes can overheat. This reduces
the braking power, increases the braking dis-
tance or even causes a brake system fault.
●
If you have to stop on a hill, keep the vehi-
cle’s brakes applied with the brake pedal or
parking brake.
NOTICE
●
When stopping the vehicle on an uphill
slope, do not try to avoid shifting into gear
and depressing the accelerator. This could
overheat and damage the automatic gear-
box.
●
If you allow the vehicle to roll with the lever
in position N and the engine o, the auto-
matic gearbox will be damaged due to a lack
of lubrication.
●
In certain driving situations or traic con-
ditions, the gears could overheat and be
damaged! If the warning lamp lights up,
stop the vehicle as soon as you can and wait
for the gearbox to cool ›››page182.
●
If the gearbox operates in emergency
mode, have the fault repaired by a specialist
workshop without delay.
Kick-down
The kick-down device provides maximum ac-
celeration when the gear selector lever is in the
positionsD, S or in Tiptronic mode.
When the accelerator pedal is fully depressed,
the automatic transmission shifts to a lower
gear, depending on speed and engine speed.
This uses the vehicle's maximum acceleration
››› .
The shift to the next higher gear will not take
place until the preset maximum engine RPM is
reached.
WARNING
Please note that if the road surface is slippery
or wet, the kickdown feature could cause the
driving wheels to spin, which could result in
skidding.
Launch-control program
The Launch-control program enables maxi-
mum acceleration from a standstill.
Condition: the engine must have reached op-
erating temperature and the steering wheel
must not be turned.
Driving
181
DSG automatic transmission
To use Launch-control you must disconnect
the traction control (TCS) or activate the ESC
Sport or ESC OFF mode, using the Infotain-
ment system menu: press the function button
> Assistants > Smart Assistants. The lamp
will remain on.
●
Press the brake pedal with your left foot and
hold it down for at least one second.
●
Set the selector lever to position S or Tip-
tronic, or select the Sport or Cupra Drive Pro-
le ›››page185.
●
With your right foot, press the accelerator
down to the full throttle or kick-down position.
The engine speed is set at approximately 2000
rpm to 4000 rpm, depending on the engine
version.
●
Take your left foot o the brake pedal. The
vehicle starts with maximum acceleration.
WARNING
●
Always adapt your driving style to the traf-
c conditions.
●
Only use the Launch control programme
when road and traic conditions permit, and
make sure your manner of driving and accel-
erating the vehicle does not inconvenience
or endanger other road users.
●
Make sure that the ESC remains switched
on. Please note that when the TCS and ESC
are deactivated, the wheels may start to spin,
causing the vehicle to lose grip. Accident
hazard!
●
After moving o, you should activate the
TCS or deactivate the ESC “Sport” mode
again using the ESC button ›››Fig.122.
Note
●
Dynamic driving or using a launch-control
program may considerably raise the temper-
ature of the catalytic converter or gearbox. In
this case, the program may be out of service
for a few minutes. The program may be used
again once the cooling phase is complete.
●
Accelerating with the Launch control pro-
gramme places a heavy load on all parts of
the vehicle. This can result in increased wear
and tear.
Inertia mode
The inertia mode allows you to travel certain
distances without using the accelerator, which
saves fuel. Plan ahead and use the inertia
mode to “let” the vehicle “roll”.
Activation of the inertia mode
Combustion engine vehicles (not PHEVs, not
mHEVs):
●
The function is only available when the “Eco”
drive prole is selected, when the accelerator
is not depressed and at speeds between 7 and
130km/h (between 4 and 80mph).
●
If when driving below about 22km/h (about
14mph) and you press the brake with the in-
tention of stopping, the engine may switch o
and remain o until the vehicle comes to a
stop. The system can automatically start the
engine to ensure that power is supplied to the
electrical system or to ensure its own start-up.
Mild hybrid electric vehicles (mHEV):
●
The function is only available when the
“Eco” or “Comfort” drive prole is selected,
when the accelerator is not depressed and at
speeds between 7 and 160km/h (between 4
and 99mph).
●
If you apply the brakes and the vehicle
slows to a stop below about 40km/h (about
25mph), the engine switches o until the vehi-
cle comes to a stop. The system can automat-
ically start the engine to ensure that power is
supplied to the electrical system or to ensure
its own start-up.
●
If you press the brake when in inertia mode
to stop above about 40km/h (about 25mph),
the inertia mode will be interrupted and the
engine will start.
182
Driving
●
When stopping without braking, the engine
automatically restarts at minimum speed to al-
low manoeuvring.
Start and cancel inertia mode
Start:
1. Select the “Eco” drive prole.
Or, in mHEVs, select the “Comfort” drive
prole.
2. Take your foot o the accelerator. The en-
gine will disengage and run at idle. The
vehicle runs without the engine braking ef-
fect. The engine may switch o in vehicles
with a mHEV system.
Cancelling inertia mode:
1. Press the accelerator.
Alternatively, pull the automatic gear shift
paddle towards the steering wheel.
WARNING
●
If the inertia mode has been switched on,
take into account, when approaching an ob-
stacle, that the vehicle will not decelerate in
the usual manner: Accident risk!
●
When using inertia mode while travelling
down hills, the vehicle can increase speed:
Accident risk!
●
If other users drive your vehicle, warn them
about inertia mode.
NOTICE
The operation of the inertia mode in combi-
nation with hybrid engines (mHEV and PHEV)
can cause the combustion engine to switch
o.
NOTICE
The inertia mode will be automatically dis-
connected on gradients steeper than 15%.
Troubleshooting
The engine does not start
The indicator lamp lights up green.
The brake is not depressed, e.g. when trying to
change the gear selector lever.
●
To select a gear range, press the brake pedal.
Indications on the instrument cluster display:
Clutch
Clutch overheated Please stop!
●
The clutch has overheated and could be
damaged. Stop and wait for the gearbox to
cool with the engine idling and press the P
parking lock button. When the warning lamp
and the driver message turn o, go to a spe-
cialised workshop to get the fault repaired. If
they do not turn o, do not continue driving.
Seek specialist assistance.
Faults in the gearbox
Gearbox: Fault! Stop the vehicle and
place the lever in P
●
There is an anomaly in the gearbox. Stop
the vehicle in a safe place and do not continue
driving. Seek specialist assistance.
Gearbox: System fault! You may con-
tinue driving
●
Have the fault corrected by a specialised
workshop without delay.
Gearbox: System fault! You can con-
tinue driving with restrictions. Reverse gear
disabled
●
Take the vehicle to a specialised workshop
and have the fault repaired.
Gearbox: System fault! You can con-
tinue driving in D until switching o the en-
gine
●
Stop the vehicle in a safe place. Seek special-
ist assistance.
Gearbox: too hot. Adapt your driving
accordingly
●
Continue driving slowly. When the warning
lamp goes out, you can continue driving nor-
mally.
Driving
183
Driving on slopes
Gearbox: press the brake and engage a
gear again
●
If the warning was caused by the temperature
of the gearbox, this driver message will be dis-
played when the gearbox has cooled again.
Emergency mode
If all the gear positions are shown over a light
background on the instrument cluster, there is
a system fault and the automatic gearbox will
operate with the backup programme. It is still
possible to drive the vehicle, but at low speeds
and within a selected range of gears. Driving in
reverse gear may not be possible.
Parking lock manual release mechanism
If, in the event of a power failure (e.g. the
12-volt vehicle battery is drained), the vehicle
must be towed and the parking lock can be re-
leased manually. In this case, you should seek
professional assistance.
Driving on slopes
Hill Hold Control (HHC)
When driving uphill with the gearbox in the
D/S or R position and without the Auto Hold
function activated, Hill Hold Control is activa-
ted when the vehicle stops.
When the brake pedal is released, the assistant
keeps the vehicle’s brakes applied for a few
seconds to give the driver time to press the
accelerator pedal and continue driving.
downhill assistant
Downhill speed control is activated when the
gear lever is in the D/S position and the brake
is applied. An appropriate lower gear is en-
gaged.
The assistant attempts to maintain the speed
at which the vehicle was travelling when the
brake was applied, within logical limits. It may
be necessary to correct the speed by pressing
the brake.
The assistant can only change down as far as
3rd gear. It is possible that on very steep slopes
you may have to switch to tiptronic mode and
then manually change down to 2nd or 1st gear
to take advantage of engine braking and take
the load o the brake system.
Downhill speed control is deactivated as soon
as the road levels out again or you press the
accelerator pedal.
On vehicles with a cruise control system
›››
page199, downhill speed control is activa-
ted when you set a cruising speed.
WARNING
The downhill speed control cannot defy the
laws of physics. Therefore, speed cannot be
kept constant in all situations. Always be pre-
pared to use the brakes!
Hill Descent Control (HDC)
✓ Valid for vehicles: with 4Drive all-wheel drive
The HDC function is activated automatically
when driving down a steep hill in Oroad
mode.
Hill Descent Control limits speed on steep
downhill gradients by automatically braking all
four wheels, helping the driver to maintain pre-
cise control of the vehicle on o-road gradi-
ents without having to constantly apply the
brakes.
The system works in both forward and reverse,
even if the N position is selected on the gear-
box. Keeping the anti-lock brake system active
prevents the wheels from locking.
Hill Descent Control is available when the dash
panel display shows the message .
Control lamps
Lights up white.
HDC is active.
Lights up grey.
HDC is on, but is not acting because the
required conditions are not met.
184
Driving
After starting the descent of a steep hill at less
than 30km/h (18mph) when the system is
on, the HDC will activate automatically if nei-
ther the accelerator nor brake pedals are de-
pressed. The speed is limited to a minimum of
2km/h (1mph) and a maximum of 30km/h
(18mph).
At any time, the driver can increase or de-
crease the speed within the above-mentioned
limit by depressing the accelerator or the
brake. The function is then temporarily inter-
rupted while the speed is being regulated and
then activated again if applicable.
However, it is essential that the surface en-
sures suicient grip. For this reason, the Hill
Descent Control will not perform its function
when, for example, descending a slope with a
frozen or slippery surface.
The Hill Descent Control intervenes automati-
cally if the following conditions are met:
●
The vehicle’s engine is running.
●
The Oroad drive prole has been selec-
ted ›››page186. Driving at a speed below
30km/h (18mph) (the message is shown on
the dash panel display).
●
The downward gradient is at least 10%.
●
Neither the brake nor accelerator pedal is
depressed.
The hill descent control is deactivated if the
gradient is less than 5%. The function can be
switched o manually in the infotainment sys-
tem using the > Assistants > Smart Assis-
tants > HDC function button.
WARNING
Always be ready to apply the brakes. Failure
to do so could result in an accident and in-
jury.
●
The hill descent control is only an auxiliary
system which in some situations may not be
able to brake the vehicle suiciently when
going downhill.
●
The vehicle's speed may increase despite
the intervention of the hill descent control.
Steering
Information relating to dierent
vehicle processes.
To make the vehicle more diicult to steal, al-
ways lock the steering before leaving the it.
Steering
On vehicles with electromechanical steering,
the power steering automatically adjusts ac-
cording to the driving speed, the steering
wheel torque and the orientation of the
wheels. The power steering only works when
the engine is running.
If the power steering does not work properly or
does not work at all, you will have to use much
more strength than usual to turn the steering
wheel.
Progressive steering
Depending on the vehicle’s features, it may or
may not incorporate a progressive steering sys-
tem.
In city traic you do not need to turn so much
on parking, manoeuvring or in very tight turns.
On roads or motorway, progressive steering
transmits, for example, in bends, a sportier,
more direct and noticeably more dynamic driv-
ing sensation.
Steering assist
This help assists the driver in critical situations.
It recommends turning the steering wheel
to perform a corrective manoeuvre (counter-
steering), turning slightly to avoid skidding
›››
.
WARNING
Steering assist helps the driver in critical sit-
uations. The driver is the person who has to
control the vehicle's steering at all times.
Driving
185
Drive Proles
Troubleshooting
Steering fault
The warning lamp lights up red.
There is a fault in the power steering.
●
Stop driving! Seek specialist assistance.
●
Do not allow the vehicle to be towed on its
own wheels.
Steering fault
The control lamp lights up or ashes yellow.
The steering is stier or reacts more sensitively
than usual.
The control lamp lights up and remains lit:
●
Restart the engine and drive slowly for a
short distance. Contact a specialist workshop
if the control lamp remains on.
●
OR: the 12-volt battery was disconnected
and reconnected. Drive slowly for a short dis-
tance.
The control lamp ashes:
●
Turn the steering wheel slightly from one
side to the other.
●
Turn o the ignition and turn it on again.
●
Consider the warnings shown on the instru-
ment cluster display.
●
If the control lamp continues ashing after
the ignition has been switched on, do not con-
tinue driving. Seek specialist assistance.
Drive Proles
Introduction
The driver can use the drive proles to adapt
various features of the vehicle's systems to the
current driving situation, the desired driving
comfort and an economical driving style. Some
of the systems that can be adapted are the
suspension, steering, engine and air condition-
ing.
Depending on the vehicle’s equipment, vari-
ous drive proles can be selected. The degree
of inuence of the vehicle's systems on the dif-
ferent drive proles depends on the vehicle’s
equipment.
Engine
Depending on the prole selected, the engine
responds more quickly or smoothly to the ac-
celerator being pressed.
In vehicles with automatic transmission, the
behaviour of the transmission is modied,
whenever a gear is changed up and down, and
at other times. The idle speed and gear posi-
tion can also be changed according to the se-
lected prole.
The Inertia Mode function can also be
switched on by selecting the Comfort prole,
or from the Individual prole by putting the
engine into ECO mode. This allows fuel con-
sumption to be reduced. Other factors can
cause it to switch on ›››
page181.
Engine sound
Depending on the selected equipment and
prole, it modies the acoustic sensation in-
side the vehicle interior in order to increase
or decrease the engine and intake sound. The
conguration is preset for each prole and can
be modied in the Individual prole.
Dynamic chassis control (DCC)
The DCC continuously adapts the damping of
the suspension system to the characteristics
of the road surface and the driving situation
(speed, acceleration and steering wheel angle)
according to the selected drive prole. The ve-
hicle's dynamic behaviour is also adapted to
improve grip on curves and turning capacity.
Within the Individual prole you can also ad-
just the DCC level in a customised manner. In
the event of a fault in the DCC, the following
message is displayed on the instrument cluster
display> Fault: damping adjustment.
Four-wheel drive (4Drive)
Modify the transmission to adjust the vehicle’s
traction capacity to suit the road surface. The
acceleration capacity from a standstill will also
be modied.
Steering
The operation of the power steering is modi-
ed and adapted to the selected prole to of-
fer the best behaviour for each situation.
186
Driving
Air conditioning
Climatronic can operate in Eco mode, espe-
cially restricting fuel consumption.
Adaptive Cruise Control (ACC)
Depending on the drive prole, the perform-
ance of the ACC is adapted to allow a speed
that is more sporty or fuel consumption-
friendly.
PreCrash system
The PreCrash system adapts according to the
selected conguration ›››page53.
The Cupra, Oroad and Snow driving proles
have specic settings to adapt them to driving
characteristics.
Selecting a driving prole
Fig.121 Multifunction steering wheel:
button to change the driving prole.
The drive prole can be selected when the ig-
nition is switched on and the vehicle is station-
ary or moving ›››
.
Selecting a driving prole
●
Press the function button > Drive Prole,
available proles will be displayed.
●
OR: With the Infotainment System turned
o, by pressing on the Drive Prole icon, the
available driving proles will be displayed.
●
OR: Briey press the ›››Fig.121 (arrow)
button to change the driving prole. Press and
hold the
button to access the Cupra prole
directly.
Displaying the drive prole information
●
To display more information on the selected
drive prole, press Information in the infotain-
ment system.
WARNING
Adjusting the driving prole while driving can
distract attention from traic and cause acci-
dents.
●
Always drive with attention to traic and in
a responsible manner.
Characteristics of drive proles
The icon of the selected prole is displayed at
all times in the upper central part of the instru-
ment cluster and on the Infotainment System
display when it is turned o.
Drive pro-
le
Characteristics
Comfort
Balanced and comfortable
drive prole. The vehicle's
component settings oer op-
timum comfort, making it
ideal for daily use and long
journeys.
Driving
187
Braking system
Drive pro-
le
Characteristics
Perform-
ance
Drive prole for a sporty, dy-
namic and precise style. The
vehicle's component settings
oer stier steering and di-
rect running gear and engine
response.
Cupra
a)
Drive prole for the ultimate
driving experience. The set-
tings of the components,
from the powertrain to the
acoustics, oer the highest
performance for thrilling, agile
and precise driving.
Individual
Personalised drive prole. Al-
lows the vehicle conguration
to be adapted to suit the us-
er's desired driving style.
Oroad
b)
Drive prole for optimal dirt
road and o-road perform-
ance. Adjusting the compo-
nents oers increased trac-
tion and allows the hill de-
scent control (HDC) to be
turned on.
Drive pro-
le
Characteristics
Snow
b)
Driving prole optimised for
low-grip conditions such as
snow or mud. Adjustments to
propulsion, braking and trans-
mission components optimise
traction and handling for a
smooth response.
a)
Available depending on the version
b)
Only for 4Drive models. Not available for PHEV
hybrid vehicles.
WARNING
Speed and driving style should always be
adapted to suit visibility, weather and traic
conditions.
Note
●
Regardless of the drive prole selected
when the ignition is switched o, all systems
will start up in Comfort mode. To select a dif-
ferent drive prole, use the CUPRA button
on the multifunction steering wheel or the
infotainment system display.
●
Speed and driving style should always be
adapted to suit visibility, weather and traic
conditions.
Braking system
Information about the brakes
During the rst 200 to 300 km, new brake
pads do not provide maximum braking power
and still have to “settle” ›››
. When running
in the brake pads, the emergency braking
distance is longer than after they have been
run in. During the run-in, avoid sharp braking
and situations that place a lot of demand on
the brakes, e.g. driving too close to another
vehicle.
Brake pad wear depends to a large extent on
the conditions in which the vehicle is used, and
driving style. If the vehicle is frequently used
in city traic and for short distances, or for
sporty driving, brake pad thickness should be
checked regularly at a specialist workshop.
Driving with wet brakes, e.g. after driving
through water, in heavy rain or after washing
the vehicle, braking performance may be af-
fected by wet brake discs, or even frozen discs
in winter. The driver should be ready to brake
harder.
If the brake discs and pads have a layer
of salt on them, the braking performance is
reduced and the braking distance increases.
When driving on salted roads without braking
for some time, the layer of salt should be re-
moved by carefully applying the brakes a few
times ›››
.
188
Driving
Corrosion on the brake discs and dirt on the
brake pads increase if the vehicle is left unused
for a long time, or if it is not driven for many
kilometres. If corrosion is present, it is recom-
mended to clean the discs and pads by braking
hard several times while driving at high speed.
Make sure that you do not endanger any other
vehicles or road users ››› .
WARNING
Driving with worn brake pads or a defective
brake system can lead to accidents and seri-
ous injuries.
●
If you suspect that the brake pads are worn
or that the brake system is faulty, have the
brake pads checked immediately by a spe-
cialist workshop and replaced if they are
worn.
WARNING
The braking performance of new brake pads
is not optimal.
●
During the rst 300 km, new brake pads do
not provide maximum braking power and still
have to “settle”. This can be counteracted by
applying more pressure to the brake pedal.
●
When brake pads are new, drive with extra
care to reduce the risk of accidents, serious
injury or loss of control of the vehicle.
●
Only perform hard braking to clean the
brake system when permitted by the traic
situation. Do not endanger the occupants of
other vehicles. Accident hazard!
●
When running in new brake pads, do not
drive too close to other vehicles or cause sit-
uations that would require the brakes to be
applied heavily.
WARNING
When the brakes overheat, their braking per-
formance drops and the braking distance in-
creases.
●
When driving downhill, particular demand
is placed on the brakes and they heat up very
quickly.
●
Before a long steep slope, reduce speed
and change down into a lower gear or range.
Therefore, using the engine brake relieves
the brakes.
●
If you wish to retrot a front spoiler, inte-
gral trim or other accessories, ensure that
the air inlet around the brakes is not reduced,
as otherwise the brake system could over-
heat. Please also note the information on
brake uid ›››page359.
WARNING
Wet, frozen or salt-covered brakes take lon-
ger to brake and increases the braking dis-
tance.
●
Test the brakes carefully.
●
Always dry the brakes and free them from
ice and salt by braking repeatedly, if permit-
ted by visibility, weather, road surface and
traic conditions.
WARNING
When braking manoeuvres are started auto-
matically, the brake pedal may move auto-
matically in the application direction. Do not
put your foot under the brake pedal. Risk of
injury!
WARNING
Ensure the vehicle does not move while in
neutral, when the engine is stopped. The
braking distance is increased considerably
when the brake servo is not active.
Note
Never let the brakes “drag” by leaving your
foot on the pedal when it is not necessary
to brake. This can cause the brakes to over-
heat, resulting in increased brake travel and
wear. Please consider the important notes on
brake uid ›››
page359.
Driving
189
Brake assist systems
Note
Regularly check the thickness of the brake
pads visually through the holes in the rims
or from the underside of the vehicle. If nec-
essary, the wheels should be removed for a
more thorough inspection. To do so, CUPRA
recommends going to a specialised CUPRA
dealer or any SEAT dealership.
Troubleshooting
Defect in the brake system
The warning lamp lights up red. A message may
also be displayed.
Stop driving!
●
Inform a specialist workshop and request a
brake system inspection.
Brake pad wear indicator
The control lamp lights up in yellow.
The front brake pads are worn.
●
Contact a specialised workshop immediately.
●
Get all the brake pads inspected and replace
if necessary.
Brake assist systems
Information relating to brake assist
systems
Brake assist systems can help the driver in crit-
ical driving or braking situations. The driver is
responsible for driving safely ›››
.
When the brake assist systems are regulating
the brakes, the brake pedal may move or make
noises. Even so, continue to brake with the
necessary force and control the trajectory of
the vehicle if necessary.
Depending on the equipment, the ESC and
TCS settings can be changed in the vehicle.
●
The ESC, ABS and TCS can only operate cor-
rectly if the four wheels are tted with the
stipulated tyres ››› .
●
If a fault occurs in the ABS, the ESC, TCS and
EDS also cease to function.
Electronic Stability Control (ESC)
The ESC helps to reduce the risk of skidding
and to improve stability in certain driving situa-
tions ››› .
Traction control (TCS)
The TCS reduces the driving force on skidding
wheels and adapts this force to suit the road
surface conditions. The TCS facilitates starting,
acceleration and hill climbing ›››
.
Electronic brake pressure distribution (EBV)
Electronic brake force distribution (EBV) regu-
lates the braking force between the front and
rear axles. Excessive braking of the rear axle is
avoided and the vehicle remains stable during
the braking operation.
Anti-lock braking system (ABS),
The ABS can prevent the wheels from locking
up under braking until shortly before the vehi-
cle comes to a stop, and helps the driver main-
tain control of the steering and the vehicle
›››
.
Brake assist (BAS)
Brake assist (BAS) can help to reduce the brak-
ing distance. Brake Assist increases the pres-
sure exerted by the driver when the brake
pedal is depressed quickly in an emergency.
Electronic dierential lock (EDS and XDS)
The EDS automatically brakes skidding wheels
and transmits the driving force to the other
driving wheels.
XDS improves traction by applying the brakes
to improve cornering acceleration.
Multi-collision brake
The multi-collision brake automatically triggers
braking if the airbag control unit detects a col-
lision in the event of an accident.
190
Driving
1)
Depending on the version.
2)
Valid for hybrid vehicles
Automatic braking requirements:
●
The driver is not pressing the accelerator
pedal.
Trailer stabilisation
1)
Note that the vehicle-trailer assembly gener-
ally tends to snake. When the snaking of the
trailer is felt by the vehicle and detected by the
ESC, it will automatically brake the towing vehi-
cle within the limits of the system and stabiliser
the vehicle-trailer set ›››
page328.
Electromechanical brake servo (eBKV)
With the ignition switched on, the electrome-
chanical brake servo (eBKV) supplements the
force exerted by the foot by increasing the
pressure that the driver exerts on the brake
pedal ››› . When a driver assistance system
apples the brakes, e.g. ACC when regulating
the speed, or during emergency braking, the
brake pedal may move automatically.
After disconnecting the ignition, the assistance
of the brake servo is progressively reduced. If
you continue to hold the vehicle in place with
the brake pedal, messages are displayed on
the instrument cluster screen. In this case, the
brake servo function is restricted.
Once stopped, immobilise the vehicle to pre-
vent it from moving ›››
page225.
Brake blending
2)
The regulated application of the brakes blends
the braking eect of the electric motor in en-
ergy recuperation with mechanical braking by
the driver.
WARNING
Smart brake assist technology cannot over-
come the limits imposed by the laws of phys-
ics and only works within the limits of the sys-
tems. Driving at high speed on icy, slippery or
wet road surfaces can cause a loss of control
of the vehicle and serious injury to the driver
and passengers.
●
Adapt your speed and driving style at all
times to suit visibility, weather, road and traf-
c conditions. Never take any risk that com-
promises safety.
●
Brake assist systems cannot prevent an ac-
cident if you are driving too close to other
vehicles.
●
Always use suitable tyres. Driving stability
depends on tyre grip.
WARNING
The eiciency of the ESC can be signicantly
reduced if components or systems that af-
fect the driving dynamics are not properly
maintained or are not working properly. This
can particularly occur if changes are made
to the suspension or unauthorised rim/tyre
combinations are used.
●
Ensure that vehicle conversions and modi-
cations are only made by specialised work-
shops.
●
Always use suitable tyres. Driving stability
depends on tyre grip.
WARNING
When driving without a brake servo or with
restricted brake servo functions, the braking
distance can increase considerably and can
cause accidents and serious injuries.
●
If the brake servo is not working, the brake
pedal has to be pressed harder, as the brak-
ing distance increases due to the lack of as-
sistance from the servo brake.
Driving
191
Brake assist systems
1)
Depending on the version.
2)
Only for vehicles with 4Drive all-wheel drive.
Connecting and disconnecting the
ESC and TCS
Fig.122 On the lower part of the centre
console: ESC on/o button
The ESC is switched on automatically when the
engine is started, and only works when the en-
gine is running and includes the ABS, EDS and
TCS systems.
The TCS function should only be switched o
in situations in which traction is insuicient.
Depending on the nishes and versions, there
is the possibility of disconnecting only the TCS
or activating the ESC in “Sport” mode, or turn-
ing o the ESC.
Disconnecting and connecting the TCS
1)
●
The TCS can be switched on and o by
briey pressing the button on the centre
console ›››Fig.122.
When the TCS is disconnected, the control
warning light lights up on the instrument
cluster.
Disconnecting and connecting the ESC in
“Sport” mode
●
In Sport mode, the ESC can be switched o
and on by briey pressing the button on the
centre console ›››Fig.122.
When “Sport” mode is connected, the inter-
ventions of the ESC to stabilise the vehicle,
and the traction control (TCS) interventions
are limited. In vehicles with 4-wheel drive, the
TCS is disconnected completely . In addition,
the control lamp lights up on the instrument
cluster.
Disconnecting and connecting the ESC
1)
●
The ESC can be switched on and o by
briey pressing the button on the centre
console ›››Fig.122.
When the ESC is disconnected the control
warning lamps
and light up on the instru-
ment cluster.
ESC in “Oroad” mode
2)
Select the Oroad prole to switch it on
›››page186. The interventions of the TCS,
as well as of the EDS and the ABS system adapt
to irregular terrain.
In the following exceptional situations it may
make sense to activate the Oroad mode to
allow the wheels to spin:
●
When swinging the vehicle to get it out of
mud/snow.
●
Driving in deep snow or on loose surfaces.
●
When driving on uneven ground with one or
two wheels in the air (axle articulation).
●
Steep descents while braking on unpaved
terrain.
For your safety we recommend that you turn
o the Oroad mode when it is not absolutely
necessary.
To disconnect the Oroad mode, select a dif-
ferent driving mode.
ESC in “Snow” mode
2)
Select the Snow prole to switch it on
›››
page186. TCS interventions adjust to the
adhesion of snowy roads.
To disconnect the Snow mode, select a dier-
ent driving mode.
192
Driving
WARNING
The ESC Sport mode should only be switched
on if the traic situation and the driver’s abil-
ity allow it. Danger of skidding!
●
With ESC in Sport mode, the stabilising
function will be limited or fully deactivated
(depending on the model version) for sport-
ier driving. The vehicle may skid.
●
If ESC is deactivated, the vehicle stabilisa-
tion function is not available.
WARNING
You should only activate the Oroad Mode
or disable the TCS if the experience of the
driver and traic conditions allow it. Danger
of skidding!
●
With the Oroad mode activated, the trac-
tion control is limited. The drive wheels can
slip and the vehicle may skid, especially if the
road surface is smooth and slippery.
Note
●
If the TCS or ESC is switched o or “Sport”
mode is selected, the cruise control system
switches o.
●
In ESC OFF mode, ESC will temporarily re-
activate to assist the driver during braking,
and will switch back to passive mode when
the brake pedal is released (depending on
the model version).
Troubleshooting
The electromechanical brake servo is
not working
Stop driving
The warning lamp lights up red.
A message is displayed as appropriate. Depress
the brake pedal hard because the braking dis-
tance will increase due to the lack of brake as-
sist from the brake servo.
●
You should obtain professional assistance
immediately.
There is a fault in the electromechanical
brake servo
The control lamp lights up in yellow.
A message is displayed for a few seconds.
Depressing the brake pedal may cause vibra-
tions. The brake pedal has to be pressed
harder because the braking distance increases
due to the reduced brake servo assistance.
●
Contact a specialised workshop.
The ABS does not work properly or does
not work at all
The control lamp lights up in yellow.
●
Contact a specialised workshop. The vehi-
cle’s brakes still work without the ABS.
The ESC or TCS is regulating
The control lamp ashes yellow.
ESC fault
The control lamp lights up in yellow. The ESC
has been switched o.
There is a fault or defect.
●
Turn o the ignition and turn it on again.
●
If possible, drive for a short distance at 15-20
km/h (9-12 mph).
●
If the control lamp is still on, go to a speci-
alised workshop.
The brake assist systems make noises
When the described brake assist systems inter-
vene, you may hear noises.
WARNING
●
When the ignition is switched on, the sta-
tus of the brake system and the brake assist
functions is automatically checked. The con-
trol lamps on the instrument cluster light up
briey and then go out. Any indicator lamp
that remains on indicates a fault. Seek quali-
ed technical assistance immediately.
●
If the brake system warning light comes
on together with the control lamp, the ABS
regulation function may not work and the
rear wheels may lock relatively quickly when
braking. This can lead to loss of control of

Related Topics

Popular Owner Manuals