2024-2026 Cupra Terramar SUV Driving -> Drive Profiles User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Drive Profiles for Your Cupra Terramar SUV First Generation (2024-2026)

Driving
185
Drive Proles
Troubleshooting
Steering fault
The warning lamp lights up red.
There is a fault in the power steering.
●
Stop driving! Seek specialist assistance.
●
Do not allow the vehicle to be towed on its
own wheels.
Steering fault
The control lamp lights up or ashes yellow.
The steering is stier or reacts more sensitively
than usual.
The control lamp lights up and remains lit:
●
Restart the engine and drive slowly for a
short distance. Contact a specialist workshop
if the control lamp remains on.
●
OR: the 12-volt battery was disconnected
and reconnected. Drive slowly for a short dis-
tance.
The control lamp ashes:
●
Turn the steering wheel slightly from one
side to the other.
●
Turn o the ignition and turn it on again.
●
Consider the warnings shown on the instru-
ment cluster display.
●
If the control lamp continues ashing after
the ignition has been switched on, do not con-
tinue driving. Seek specialist assistance.
Drive Proles
Introduction
The driver can use the drive proles to adapt
various features of the vehicle's systems to the
current driving situation, the desired driving
comfort and an economical driving style. Some
of the systems that can be adapted are the
suspension, steering, engine and air condition-
ing.
Depending on the vehicle’s equipment, vari-
ous drive proles can be selected. The degree
of inuence of the vehicle's systems on the dif-
ferent drive proles depends on the vehicle’s
equipment.
Engine
Depending on the prole selected, the engine
responds more quickly or smoothly to the ac-
celerator being pressed.
In vehicles with automatic transmission, the
behaviour of the transmission is modied,
whenever a gear is changed up and down, and
at other times. The idle speed and gear posi-
tion can also be changed according to the se-
lected prole.
The Inertia Mode function can also be
switched on by selecting the Comfort prole,
or from the Individual prole by putting the
engine into ECO mode. This allows fuel con-
sumption to be reduced. Other factors can
cause it to switch on ›››
page181.
Engine sound
Depending on the selected equipment and
prole, it modies the acoustic sensation in-
side the vehicle interior in order to increase
or decrease the engine and intake sound. The
conguration is preset for each prole and can
be modied in the Individual prole.
Dynamic chassis control (DCC)
The DCC continuously adapts the damping of
the suspension system to the characteristics
of the road surface and the driving situation
(speed, acceleration and steering wheel angle)
according to the selected drive prole. The ve-
hicle's dynamic behaviour is also adapted to
improve grip on curves and turning capacity.
Within the Individual prole you can also ad-
just the DCC level in a customised manner. In
the event of a fault in the DCC, the following
message is displayed on the instrument cluster
display> Fault: damping adjustment.
Four-wheel drive (4Drive)
Modify the transmission to adjust the vehicle’s
traction capacity to suit the road surface. The
acceleration capacity from a standstill will also
be modied.
Steering
The operation of the power steering is modi-
ed and adapted to the selected prole to of-
fer the best behaviour for each situation.
186
Driving
Air conditioning
Climatronic can operate in Eco mode, espe-
cially restricting fuel consumption.
Adaptive Cruise Control (ACC)
Depending on the drive prole, the perform-
ance of the ACC is adapted to allow a speed
that is more sporty or fuel consumption-
friendly.
PreCrash system
The PreCrash system adapts according to the
selected conguration ›››page53.
The Cupra, Oroad and Snow driving proles
have specic settings to adapt them to driving
characteristics.
Selecting a driving prole
Fig.121 Multifunction steering wheel:
button to change the driving prole.
The drive prole can be selected when the ig-
nition is switched on and the vehicle is station-
ary or moving ›››
.
Selecting a driving prole
●
Press the function button > Drive Prole,
available proles will be displayed.
●
OR: With the Infotainment System turned
o, by pressing on the Drive Prole icon, the
available driving proles will be displayed.
●
OR: Briey press the ›››Fig.121 (arrow)
button to change the driving prole. Press and
hold the
button to access the Cupra prole
directly.
Displaying the drive prole information
●
To display more information on the selected
drive prole, press Information in the infotain-
ment system.
WARNING
Adjusting the driving prole while driving can
distract attention from traic and cause acci-
dents.
●
Always drive with attention to traic and in
a responsible manner.
Characteristics of drive proles
The icon of the selected prole is displayed at
all times in the upper central part of the instru-
ment cluster and on the Infotainment System
display when it is turned o.
Drive pro-
le
Characteristics
Comfort
Balanced and comfortable
drive prole. The vehicle's
component settings oer op-
timum comfort, making it
ideal for daily use and long
journeys.

Related Topics

Popular Owner Manuals