2024-2026 Cupra Terramar SUV Driving -> Steering User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Steering for Your Cupra Terramar SUV First Generation (2024-2026)

184
Driving
After starting the descent of a steep hill at less
than 30km/h (18mph) when the system is
on, the HDC will activate automatically if nei-
ther the accelerator nor brake pedals are de-
pressed. The speed is limited to a minimum of
2km/h (1mph) and a maximum of 30km/h
(18mph).
At any time, the driver can increase or de-
crease the speed within the above-mentioned
limit by depressing the accelerator or the
brake. The function is then temporarily inter-
rupted while the speed is being regulated and
then activated again if applicable.
However, it is essential that the surface en-
sures suicient grip. For this reason, the Hill
Descent Control will not perform its function
when, for example, descending a slope with a
frozen or slippery surface.
The Hill Descent Control intervenes automati-
cally if the following conditions are met:
●
The vehicle’s engine is running.
●
The Oroad drive prole has been selec-
ted ›››page186. Driving at a speed below
30km/h (18mph) (the message is shown on
the dash panel display).
●
The downward gradient is at least 10%.
●
Neither the brake nor accelerator pedal is
depressed.
The hill descent control is deactivated if the
gradient is less than 5%. The function can be
switched o manually in the infotainment sys-
tem using the > Assistants > Smart Assis-
tants > HDC function button.
WARNING
Always be ready to apply the brakes. Failure
to do so could result in an accident and in-
jury.
●
The hill descent control is only an auxiliary
system which in some situations may not be
able to brake the vehicle suiciently when
going downhill.
●
The vehicle's speed may increase despite
the intervention of the hill descent control.
Steering
Information relating to dierent
vehicle processes.
To make the vehicle more diicult to steal, al-
ways lock the steering before leaving the it.
Steering
On vehicles with electromechanical steering,
the power steering automatically adjusts ac-
cording to the driving speed, the steering
wheel torque and the orientation of the
wheels. The power steering only works when
the engine is running.
If the power steering does not work properly or
does not work at all, you will have to use much
more strength than usual to turn the steering
wheel.
Progressive steering
Depending on the vehicle’s features, it may or
may not incorporate a progressive steering sys-
tem.
In city traic you do not need to turn so much
on parking, manoeuvring or in very tight turns.
On roads or motorway, progressive steering
transmits, for example, in bends, a sportier,
more direct and noticeably more dynamic driv-
ing sensation.
Steering assist
This help assists the driver in critical situations.
It recommends turning the steering wheel
to perform a corrective manoeuvre (counter-
steering), turning slightly to avoid skidding
›››
.
WARNING
Steering assist helps the driver in critical sit-
uations. The driver is the person who has to
control the vehicle's steering at all times.
Driving
185
Drive Proles
Troubleshooting
Steering fault
The warning lamp lights up red.
There is a fault in the power steering.
●
Stop driving! Seek specialist assistance.
●
Do not allow the vehicle to be towed on its
own wheels.
Steering fault
The control lamp lights up or ashes yellow.
The steering is stier or reacts more sensitively
than usual.
The control lamp lights up and remains lit:
●
Restart the engine and drive slowly for a
short distance. Contact a specialist workshop
if the control lamp remains on.
●
OR: the 12-volt battery was disconnected
and reconnected. Drive slowly for a short dis-
tance.
The control lamp ashes:
●
Turn the steering wheel slightly from one
side to the other.
●
Turn o the ignition and turn it on again.
●
Consider the warnings shown on the instru-
ment cluster display.
●
If the control lamp continues ashing after
the ignition has been switched on, do not con-
tinue driving. Seek specialist assistance.
Drive Proles
Introduction
The driver can use the drive proles to adapt
various features of the vehicle's systems to the
current driving situation, the desired driving
comfort and an economical driving style. Some
of the systems that can be adapted are the
suspension, steering, engine and air condition-
ing.
Depending on the vehicle’s equipment, vari-
ous drive proles can be selected. The degree
of inuence of the vehicle's systems on the dif-
ferent drive proles depends on the vehicle’s
equipment.
Engine
Depending on the prole selected, the engine
responds more quickly or smoothly to the ac-
celerator being pressed.
In vehicles with automatic transmission, the
behaviour of the transmission is modied,
whenever a gear is changed up and down, and
at other times. The idle speed and gear posi-
tion can also be changed according to the se-
lected prole.
The Inertia Mode function can also be
switched on by selecting the Comfort prole,
or from the Individual prole by putting the
engine into ECO mode. This allows fuel con-
sumption to be reduced. Other factors can
cause it to switch on ›››
page181.
Engine sound
Depending on the selected equipment and
prole, it modies the acoustic sensation in-
side the vehicle interior in order to increase
or decrease the engine and intake sound. The
conguration is preset for each prole and can
be modied in the Individual prole.
Dynamic chassis control (DCC)
The DCC continuously adapts the damping of
the suspension system to the characteristics
of the road surface and the driving situation
(speed, acceleration and steering wheel angle)
according to the selected drive prole. The ve-
hicle's dynamic behaviour is also adapted to
improve grip on curves and turning capacity.
Within the Individual prole you can also ad-
just the DCC level in a customised manner. In
the event of a fault in the DCC, the following
message is displayed on the instrument cluster
display> Fault: damping adjustment.
Four-wheel drive (4Drive)
Modify the transmission to adjust the vehicle’s
traction capacity to suit the road surface. The
acceleration capacity from a standstill will also
be modied.
Steering
The operation of the power steering is modi-
ed and adapted to the selected prole to of-
fer the best behaviour for each situation.

Related Topics

Popular Owner Manuals