2024-2026 Cupra Terramar SUV Driving -> Braking system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Braking system for Your Cupra Terramar SUV First Generation (2024-2026)

Driving
187
Braking system
Drive pro-
le
Characteristics
Perform-
ance
Drive prole for a sporty, dy-
namic and precise style. The
vehicle's component settings
oer stier steering and di-
rect running gear and engine
response.
Cupra
a)
Drive prole for the ultimate
driving experience. The set-
tings of the components,
from the powertrain to the
acoustics, oer the highest
performance for thrilling, agile
and precise driving.
Individual
Personalised drive prole. Al-
lows the vehicle conguration
to be adapted to suit the us-
er's desired driving style.
Oroad
b)
Drive prole for optimal dirt
road and o-road perform-
ance. Adjusting the compo-
nents oers increased trac-
tion and allows the hill de-
scent control (HDC) to be
turned on.
Drive pro-
le
Characteristics
Snow
b)
Driving prole optimised for
low-grip conditions such as
snow or mud. Adjustments to
propulsion, braking and trans-
mission components optimise
traction and handling for a
smooth response.
a)
Available depending on the version
b)
Only for 4Drive models. Not available for PHEV
hybrid vehicles.
WARNING
Speed and driving style should always be
adapted to suit visibility, weather and traic
conditions.
Note
●
Regardless of the drive prole selected
when the ignition is switched o, all systems
will start up in Comfort mode. To select a dif-
ferent drive prole, use the CUPRA button
on the multifunction steering wheel or the
infotainment system display.
●
Speed and driving style should always be
adapted to suit visibility, weather and traic
conditions.
Braking system
Information about the brakes
During the rst 200 to 300 km, new brake
pads do not provide maximum braking power
and still have to “settle” ›››
. When running
in the brake pads, the emergency braking
distance is longer than after they have been
run in. During the run-in, avoid sharp braking
and situations that place a lot of demand on
the brakes, e.g. driving too close to another
vehicle.
Brake pad wear depends to a large extent on
the conditions in which the vehicle is used, and
driving style. If the vehicle is frequently used
in city traic and for short distances, or for
sporty driving, brake pad thickness should be
checked regularly at a specialist workshop.
Driving with wet brakes, e.g. after driving
through water, in heavy rain or after washing
the vehicle, braking performance may be af-
fected by wet brake discs, or even frozen discs
in winter. The driver should be ready to brake
harder.
If the brake discs and pads have a layer
of salt on them, the braking performance is
reduced and the braking distance increases.
When driving on salted roads without braking
for some time, the layer of salt should be re-
moved by carefully applying the brakes a few
times ›››
.
188
Driving
Corrosion on the brake discs and dirt on the
brake pads increase if the vehicle is left unused
for a long time, or if it is not driven for many
kilometres. If corrosion is present, it is recom-
mended to clean the discs and pads by braking
hard several times while driving at high speed.
Make sure that you do not endanger any other
vehicles or road users ››› .
WARNING
Driving with worn brake pads or a defective
brake system can lead to accidents and seri-
ous injuries.
●
If you suspect that the brake pads are worn
or that the brake system is faulty, have the
brake pads checked immediately by a spe-
cialist workshop and replaced if they are
worn.
WARNING
The braking performance of new brake pads
is not optimal.
●
During the rst 300 km, new brake pads do
not provide maximum braking power and still
have to “settle”. This can be counteracted by
applying more pressure to the brake pedal.
●
When brake pads are new, drive with extra
care to reduce the risk of accidents, serious
injury or loss of control of the vehicle.
●
Only perform hard braking to clean the
brake system when permitted by the traic
situation. Do not endanger the occupants of
other vehicles. Accident hazard!
●
When running in new brake pads, do not
drive too close to other vehicles or cause sit-
uations that would require the brakes to be
applied heavily.
WARNING
When the brakes overheat, their braking per-
formance drops and the braking distance in-
creases.
●
When driving downhill, particular demand
is placed on the brakes and they heat up very
quickly.
●
Before a long steep slope, reduce speed
and change down into a lower gear or range.
Therefore, using the engine brake relieves
the brakes.
●
If you wish to retrot a front spoiler, inte-
gral trim or other accessories, ensure that
the air inlet around the brakes is not reduced,
as otherwise the brake system could over-
heat. Please also note the information on
brake uid ›››page359.
WARNING
Wet, frozen or salt-covered brakes take lon-
ger to brake and increases the braking dis-
tance.
●
Test the brakes carefully.
●
Always dry the brakes and free them from
ice and salt by braking repeatedly, if permit-
ted by visibility, weather, road surface and
traic conditions.
WARNING
When braking manoeuvres are started auto-
matically, the brake pedal may move auto-
matically in the application direction. Do not
put your foot under the brake pedal. Risk of
injury!
WARNING
Ensure the vehicle does not move while in
neutral, when the engine is stopped. The
braking distance is increased considerably
when the brake servo is not active.
Note
Never let the brakes “drag” by leaving your
foot on the pedal when it is not necessary
to brake. This can cause the brakes to over-
heat, resulting in increased brake travel and
wear. Please consider the important notes on
brake uid ›››
page359.

Related Topics

Popular Owner Manuals