WARNING
The ESC Sport mode should only be switched
on if the traic situation and the driver’s abil-
ity allow it. Danger of skidding!
●
With ESC in Sport mode, the stabilising
function will be limited or fully deactivated
(depending on the model version) for sport-
ier driving. The vehicle may skid.
●
If ESC is deactivated, the vehicle stabilisa-
tion function is not available.
WARNING
You should only activate the Oroad Mode
or disable the TCS if the experience of the
driver and traic conditions allow it. Danger
of skidding!
●
With the Oroad mode activated, the trac-
tion control is limited. The drive wheels can
slip and the vehicle may skid, especially if the
road surface is smooth and slippery.
Note
●
If the TCS or ESC is switched o or “Sport”
mode is selected, the cruise control system
switches o.
●
In ESC OFF mode, ESC will temporarily re-
activate to assist the driver during braking,
and will switch back to passive mode when
the brake pedal is released (depending on
the model version).
Troubleshooting
The electromechanical brake servo is
not working
Stop driving
The warning lamp lights up red.
A message is displayed as appropriate. Depress
the brake pedal hard because the braking dis-
tance will increase due to the lack of brake as-
sist from the brake servo.
●
You should obtain professional assistance
immediately.
There is a fault in the electromechanical
brake servo
The control lamp lights up in yellow.
A message is displayed for a few seconds.
Depressing the brake pedal may cause vibra-
tions. The brake pedal has to be pressed
harder because the braking distance increases
due to the reduced brake servo assistance.
●
Contact a specialised workshop.
The ABS does not work properly or does
not work at all
The control lamp lights up in yellow.
●
Contact a specialised workshop. The vehi-
cle’s brakes still work without the ABS.
The ESC or TCS is regulating
The control lamp ashes yellow.
ESC fault
The control lamp lights up in yellow. The ESC
has been switched o.
There is a fault or defect.
●
Turn o the ignition and turn it on again.
●
If possible, drive for a short distance at 15-20
km/h (9-12 mph).
●
If the control lamp is still on, go to a speci-
alised workshop.
The brake assist systems make noises
When the described brake assist systems inter-
vene, you may hear noises.
WARNING
●
When the ignition is switched on, the sta-
tus of the brake system and the brake assist
functions is automatically checked. The con-
trol lamps on the instrument cluster light up
briey and then go out. Any indicator lamp
that remains on indicates a fault. Seek quali-
ed technical assistance immediately.
●
If the brake system warning light comes
on together with the control lamp, the ABS
regulation function may not work and the
rear wheels may lock relatively quickly when
braking. This can lead to loss of control of