2024-2026 Cupra Terramar SUV Driving -> Driving indications User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Driving indications for Your Cupra Terramar SUV First Generation (2024-2026)

Driving
161
Driving indications
Driving
Driving indications
Pedals
●
Make sure that you can always press the ped-
als without any problems.
●
Ensure that the pedals can return unimpaired
to their initial positions.
●
Ensure that the oor mats are securely fas-
tened during the trip and do not obstruct the
pedals ››› .
Only use oor mats which leave the pedals
clear and which are secured to prevent them
from slipping. You can obtain suitable oor
mats from a specialised dealership. Fasteners
for oor mats are tted in the footwells.
Wear suitable footwear
Always wear shoes which support your feet
properly and give you a good feeling for the
pedals.
WARNING
●
Restricting pedal operation can lead to
critical situations while driving.
●
Never lay or t oor mats or other oor
coverings over the original oor mats. This
would reduce the pedal area and could ob-
struct the pedals. Risk of accident.
●
Never place objects in the driver footwell.
An object could move into the pedal area and
impair pedal operation.
Selecting the optimal gear
Depending on the equipment on the instru-
ment cluster display, a recommendation is
shown with the gear that should be engaged
to optimise consumption.
On vehicles with automatic transmission, it is
only displayed when driving in Tiptronic mode
›››
page179.
No recommendation will appear if the optimal
gear is engaged. The current gear will be dis-
played.
Display Meaning
3 Optimum gear.
4 5
Changing to a higher gear is
recommended.
2 1
Changing to a lower gear is
recommended.
Information regarding the “cleanliness” of
the particulate lter
When the exhaust system detects that the par-
ticulate lter is close to saturation, this system’s
self-cleaning function recommends the opti-
mal gear for that function ›››page336.
WARNING
The gear change recommendation is an aux-
iliary function and in no case should be a
substitute for careful driving.
●
Responsibility for selecting the correct
gear, depending on the circumstances, rests
solely with the driver.
For the sake of the environment
Selecting the correct gear can help to save
fuel.
Note
The recommended gear display turns o
when you are no longer in tiptronic mode.
Economical and environmentally
friendly driving
Fuel consumption, environmental pollution
and wear to the engine, brakes and tyres all de-
pend largely on driving style. Consumption can
be reduced between 10-15% with an eicient
162
Driving
driving style. The following section gives you
some tips on lessening the impact on the envi-
ronment and reducing your operating costs at
the same time.
Active cylinder management (ACT®)
Depending on vehicle equipment, the active
cylinder management (ACT®) may deactivate
some of the engine cylinders if the driving sit-
uation does not require too much power. The
number of active cylinders can be seen on the
instrument cluster display ›››page16.
Anticipation when driving
If you think ahead when driving, you will need
to brake less and thus accelerate less. Use the
vehicle's inertia whenever possible, with a gear
engaged. This takes advantage of the engine
braking eect, reducing wear on the brakes
and tyres. Emissions and fuel consumption will
drop to zero.
Changing gear to save energy
An eective way of saving is to change in ad-
vance to a higher gear.
Automatic transmission: accelerate gradually
and without reaching the “kick-down” posi-
tion.
Avoid driving at high speed
Avoid travelling at your vehicle’s top speed,
whenever possible. Fuel consumption, emis-
sion of harmful gases and noise pollution mul-
tiply as speed is increased. Driving at moderate
speeds will help to save fuel.
Reduce idling time
In vehicles with the Start-Stop system idling is
automatically reduced. In vehicles without the
Start-Stop system it is worth switching o the
engine, for example, at level crossings and at
traic lights that remain red for long periods of
time. When an engine has reached operating
temperature, and depending on the cylinder
capacity, keeping it switched o for a minimum
of about 5 seconds already saves more than
the amount of fuel necessary for restarting.
The engine takes a long time to warm up when
it is idling. Mechanical wear and pollutant emis-
sions are also especially high during this initial
warm-up phase. It is therefore best to drive
o immediately after starting the engine. Avoid
running the engine at high speed.
Regular maintenance
Regular servicing helps in saving fuel even be-
fore the engine is started. A well-serviced en-
gine gives you the benet of improved fuel
eiciency as well as maximum reliability and
an enhanced resale value. A badly serviced en-
gine can consume up to 10% more fuel than
necessary.
Avoid short journeys
The engine and catalytic converter need to
reach their optimal operating temperature in
order to minimise fuel consumption and emis-
sions.
A cold engine consumes a disproportionate
amount of fuel. The engine reaches its working
temperature after about four kilometres (2.5
miles), when fuel consumption will return to a
normal level.
Check tyre pressure
Always make sure the tyres are inated to the
correct pressures ›››page376 to save fuel.
If the pressure is half a bar too low, fuel con-
sumption may increase by 5%. Due to the
greater rolling resistance, under-ination also
increases tyre wear and impairs handling.
Do not use winter tyres all year round as they
increase fuel consumption by up to 10%.
Avoid carrying unnecessary loads
Given that every kilo of extra weight will in-
crease the fuel consumption, it is advisable
make sure that no unnecessary loads are being
transported.
Since the luggage rack increases the aero-
dynamic drag of the vehicle, you should
remove it when not needed. At speeds of
100-120km/h (62-75mph), this will achieve
fuel savings of 12%.
Driving
163
Driving indications
Save electrical energy
The engine drives the alternator, thereby gen-
erating electricity. This implies that any in-
crease in power consumption also increases
fuel consumption! For this reason, switch o
any unneeded electrical devices. Devices that
use a lot of electricity include the blower at a
high setting, the rear window heating or the
seat heating.
Plug-in hybrid drive: brake early and evenly to
take advantage of energy recovery.
Note
●
If you have the Start-Stop system, it is rec-
ommended that it should not be disconnec-
ted.
●
It is recommended that you close the win-
dows when driving at more than 60km/h
(37mph).
●
Use the engine brake on downhills by
changing to the gear that is best suited for
the gradient. Fuel consumption will be “zero”
and the brakes will not suer.
Driving with a loaded vehicle
In order to achieve appropriate driving char-
acteristics when the vehicle is loaded, please
note the following:
●
Place all luggage securely ›››page314.
●
Accelerate with particular care and precau-
tion.
●
Avoid sharp braking and sudden manoeu-
vres.
●
Brake earlier than usual.
●
If applicable, please note the information
about the roof rack ›››page320.
WARNING
Loads that move around could seriously en-
danger the vehicle's stability and safety, ex-
tend the braking distance during hard or
emergency braking and lead to serious acci-
dents and injuries.
●
Secure the load correctly to prevent it from
moving around.
●
Secure heavy objects with suitable lashing
straps or tie-down belts.
●
Ensure that the rear seat backrests are se-
curely engaged.
Driving with the rear lid open
Driving with the rear lid open is particularly
dangerous. Secure all objects and the open
rear lid correctly and take any necessary meas-
ures.
Driving with the rear lid open increases the
aerodynamic drag of the vehicle, along with
fuel consumption. It is therefore recommen-
ded that you do not drive with the rear lid
open.
WARNING
Driving with the rear lid unlocked or open
can cause serious injury.
●
Always drive with the rear lid closed.
●
Place all objects securely inside the lug-
gage compartment. Otherwise, loose objects
could fall out of the luggage compartment
and injure road users driving behind.
●
Always drive carefully and with special care
and anticipation.
●
Avoid braking and sudden manoeuvres, as
the open rear lid could move uncontrollably.
●
When transporting objects that protrude
from the luggage compartment, mark them
accordingly to warn other road users. Please
bear in mind all legal provisions.
●
Never use the rear lid to support or secure
objects protruding from the luggage com-
partment.
●
If a luggage rack is tted on the rear lid, re-
move it and the load when you have to drive
with the rear lid open.
164
Driving
NOTICE
An open rear lid changes the height and, in
some cases, the length of the vehicle.
Note
Depending on the country, it may be forbid-
den to drive with the rear lid open. Please
observe the legal regulations of the country
in question.
Driving on ooded roads
To prevent damage to the vehicle driving on
ooded roads, take the following into account:
●
Water should never come above the lower
edge of the bodywork.
●
Drive at pedestrian speed.
●
Never stop the vehicle in the water, drive in
reverse or stop the engine.
●
Vehicles driving in the opposite direction
form waves that can raise the water level so
high that your vehicle will not be able to cross
the water safely.
WARNING
After driving through ooded zones, braking
eectiveness can decrease if the brake discs
or pads are damp ›››page187.
Note
●
Driving through ooded areas may severely
damage vehicle components such as the en-
gine, drive train or electrical system.
●
Avoid driving through salt water (corrosion)
›››
page394.
●
Whenever driving through water, the
Start-Stop system must be switched o
›››
page175.
Running in
Please observe the instructions for running-in
new components.
Running-in the engine
A new engine must be driven through a
run-in period during its rst 1500kilometres
(1000miles). During its rst few hours of
running, the internal friction in the engine is
greater than later on when all the moving parts
have bedded down.
How the vehicle is driven for the rst 1500km
(1000miles) inuences the future engine per-
formance. Throughout the life of the vehi-
cle, it should be driven at a moderate speed
(especially when the engine is cold) to re-
duce engine wear and increase its useful life.
Never drive at extremely low engine speeds.
Always engage a lower gear when the engine
works “irregularly”. For the rst 1000km or
600miles, please note:
●
Do not use full throttle.
●
Do not force the engine above two thirds of
its maximum speed.
●
Do not tow a trailer.
Between 1000 and 1500kilometres (600 to
1000miles), gradually increase power until
reaching the maximum speed and high engine
speeds.
Running in new tyres and brake pads
●
Replacement of wheel rims and new tyres
›››page375.
●
Information about brakes ›››page187.
For the sake of the environment
If the engine is run in gently, the life of the
engine will be increased and the engine oil
consumption reduced.
Four-wheel drive (4Drive)
On four-wheel drive models, the engine power
is distributed to all four wheels
General notes
On four-wheel drive vehicles, the engine
power is distributed to all four wheels. The dis-
tribution of power is controlled automatically
according to your driving style and the road
conditions. See also ›››
page189.
Driving
165
Driving indications
The four-wheel drive is specially designed to
complement the higher engine power. This
combination gives the vehicle exceptional
handling and performance capabilities, both
on normal roads and in more diicult condi-
tions, such as snow and ice. Even so (or per-
haps especially for this reason), it is important
to observe certain safety points ››› .
Winter tyres
Thanks to four-wheel drive, your vehicle will
have plenty of traction in winter conditions,
even with the standard tyres. Nevertheless, we
still recommend that winter tyres or all-season
tyres be tted on all four wheels to give an even
better braking response.
Snow chains
On roads where snow chains are mandatory,
this also applies to cars with four-wheel drive
›››page379.
Changing tyres
On vehicles with four-wheel drive, all four tyres
must have the same rolling circumference.
Also avoid using tyres with varying tread depths
›››page375.
O-roader?
Your CUPRA vehicle is not an o-roader: it
does not have enough ground clearance to be
used as such. Avoid rough tracks and uneven
terrain.
WARNING
●
Even with four-wheel drive, you should al-
ways adjust your speed to suit the conditions.
Do not let the extra safety features tempt you
into taking any risks when driving. Accident
hazard!
●
The braking capability of your vehicle is
limited by the tyres' grip. It is therefore
no dierent from a car without four-wheel
drive. So do not be tempted to drive too fast
on rm or slippery roads just because the
vehicle still has good acceleration in these
conditions. Accident hazard!
●
On wet roads bear in mind that the front
wheels may start to “aquaplane” and lose
contact with the road if the car is driven
too fast. If this should happen, there will be
no sudden increase in engine speed to warn
the driver, as occurs with a front-wheel drive
car. For this reason you should always choose
a driving speed suitable for the road condi-
tions. Accident hazard!
Trips abroad
The vehicle has been manufactured for a spe-
cic country and meets the approval regula-
tions in force in that country at the time it was
manufactured.
If you are going to use the vehicle abroad tem-
porarily or for a short period of time, please
observe the relevant instructions.
Some countries have special safety regulations
and provisions that the vehicle may not comply
with. Before travelling abroad, CUPRA recom-
mends that you seek information from one of
your dealers about the legal provisions in force
in your destination country.
If you are going to sell the vehicle in another
country or use it there for a longer period of
time, please observe the legal regulations in
force in the country in question.
In some cases it may be necessary to install or
remove certain equipment at a later date, and
to deactivate certain functions. Sets and types
of services may also be aected. In particular,
this can occur if the vehicle is to be used in an-
other climatic region for a long period of time.
Due to the dierent frequency bands around
the world, the factory-tted infotainment sys-
tem may not work in another country.
With petrol vehicles, it should be ensured that
lead-free petrol is available throughout the
journey. Seek information about service sta-
tion networks selling unleaded fuel.

Related Topics

Popular Owner Manuals