2024-2026 Cupra Terramar SUV Driving -> Start-Stop system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Start-Stop system for Your Cupra Terramar SUV First Generation (2024-2026)

Driving
175
Start-Stop system
1)
In the mHEV version (semi-hybrid), above 20 km/h.
System power limited
The warning lamp lights up yellow.
A warning text accompanied by an audible
warning is displayed on the instrument cluster.
System power is limited as it is not possible to
use the combustion engine.
●
The available power can be monitored on
the instrument cluster ›››page21.
●
If the combustion engine cannot be started
due to lack of fuel (empty tank), refuel as soon
as possible. If the charge level of the high-volt-
age battery is low and it is not possible to use
the combustion engine, the vehicle will be im-
mobilised.
As soon as the combustion engine is available
again, the warning light on the instrument clus-
ter will go out.
Electric Mode is not available
The indicator lamp lights up in white.
The electric mode (driving in electric mode)
cannot be used temporarily because one or
more conditions are not met.
●
Meet the conditions for using the Electric
mode ›››page170.
Start-Stop system
Description and operation
Not valid for PHEV hybrid vehicles
The Start-Stop system helps you to save fuel
and reduce CO
2
emissions.
In Start-Stop mode, the engine will automati-
cally switch o when the vehicle stops or is
stopping. The ignition remains switched on.
The engine automatically switches back on
when required.
When the ignition is switched on, the Start-
Stop function is automatically activated.
Indicator lamps
The Start-Stop system is available, the
automatic engine shutdown is active.
The Start-Stop system is not available or
has been disconnected.
Stopping and starting the engine
●
Brake until the vehicle has come to a stand-
still, and keep your foot on the brake pedal or
activate the Auto Hold function so that the ve-
hicle remains braked. The engine will stop. The
warning lamp
will appear on the display. The
engine may stop before the car stops com-
pletely (approximately 7 or 2 km/h depending
on the vehicle's gearbox
1)
).
●
When you take your foot o the brake pedal
the engine will start up again. The indicator
lamp goes out. When the Auto Hold system is
active, the engine will not start if you remove
your foot from the brake pedal. The car starts
when you press the accelerator pedal.
Basic requirements for the start/stop mode
●
The driver door must be closed.
●
The driver's seat belt must be fastened.
●
The bonnet must be closed.
●
The engine has reached operating tempera-
ture.
●
The reverse gear must not be engaged.
●
The vehicle must not be on a very steep
slope.
The engine does not turn o for various rea-
sons
Before stopping the vehicle, the system veri-
es whether certain conditions are met. The
engine does not switch o, in the following
situations for example:
176
Driving
1)
Except for the MHEV version.
●
The engine has not yet reached the required
temperature for the Start-Stop mode.
●
The temperature selected on the climate
control has not been reached.
●
If maximum (HI) or minimum (LO) tempera-
ture is requested in the air conditioner.
●
De-icing function button activated.
●
Park assist is switched on.
●
The battery is very low.
●
The steering wheel is overly turned or is be-
ing turned.
●
If there is a danger of misting.
●
After engaging reverse gear.
●
In case of a very steep gradient.
●
In a traic jam after stopping for the fth
time, the engine will not stop any more.
●
With ESC disabled.
●
After emergency braking or loss of adhesion.
●
With a trailer attached.
●
While the particle lter is regenerating.
The instrument cluster screen displays .
The engine starts by itself
When stopped, the normal system mode may
be interrupted in the following situations. The
engine restarts without the driver's interven-
tion.
●
The interior temperature diers from the
temperature selected on the climate control.
●
Defrost function button activated .
●
The brake is pressed several times in a row.
●
The battery is not charged enough.
●
High electricity consumption.
●
The vehicle rolls forward or backward with
the engine o.
●
ESC deactivated.
●
With automatic gearbox:The accelerator
pedal is depressed.
●
The steering wheel is turned slightly.
1)
●
When the air conditioning is activated.
●
Exhaust system temperature is too low.
Additional information related to the auto-
matic gearbox
The engine stops when the selector lever is in
D, N and S, as well as in Tiptronic mode. When
the parking lock button P is activated, the en-
gine will also remain o when you remove your
foot from the brake.
In MHEV vehicles the stop does not occur in S
or in Tiptronic mode.
In order to start the engine up again the ac-
celerator must be pressed, or another gear en-
gaged or the brake released.
If the selector lever is placed in R while stop-
ped, the engine will start up again.
Additional information about vehicles with
Adaptive Cruise Control (ACC)
In vehicles with ACC function, the engine will
start up again in certain operating conditions
if the radar sensor detects that the vehicle
ahead drives o again.
WARNING
●
Never switch the engine o until the vehi-
cle is stationary. The operation of the brake
and steering will not be fully guaranteed.
More force will be needed to turn the steer-
ing wheel or to brake. You could suer an
accident and even serious injuries.
●
To avoid injury, make sure that the Start-
Stop system is switched o when working in
the engine compartment ›››page177.
NOTICE
The Start-Stop system must always be
switched o when driving through ooded
areas ›››page164.
Driving
177
DSG automatic transmission
Note
●
In vehicles with an automatic gearbox,
you can control whether the engine should
switch o or not by reducing or increasing
the brake force applied. While the vehicle re-
mains stopped, the engine will not stop if the
brake pedal is slightly pressed, in traic jams
with frequent stopping and starting for ex-
ample. As soon as strong pressure is applied
to the brake pedal, the engine will stop.
●
When stopped, the brake pedal must be
kept pressed to ensure that the vehicle does
not move.
●
If the lever is placed in position D, N or S af-
ter engaging reverse gear, 10km/h (6mph)
in a forwards direction must be reached for
the system to be in a condition to stop the
engine.
Manually connecting and discon-
necting the Start-Stop system
Not valid for PHEV hybrid vehicles
Fig.118 In the infotainment system: Start-
Stop system (accessible from dierent
infotainment menus).
›››
Fig.118:
System disconnected.
System connected.
If you do not wish to use the system, you can
switch it o manually:
●
In the infotainment system select > Assis-
tants > Smart Assistants.
Note
When the ignition is switched on, the Start-
Stop system activates automatically.
Troubleshooting
Not valid for PHEV hybrid vehicles
Indications for the driver on the instrument
cluster screen
A warning will be displayed whenever there is
an error or the Start-Stop system is switched
on/o.
“Start the engine manually”
●
This indication shows that the Start-Stop
system cannot restart the engine.
This happens for 2 reasons: if the driver's door
has been opened or if the driver has unbuck-
led the seat belt.
“Start-Stop system: Fault! Function not
available”
●
There is a fault in the Start-Stop system. Take
the vehicle to a workshop to have the fault re-
paired.
DSG automatic transmis-
sion
Introduction
Your vehicle is equipped with an electronically
controlled manual gearbox. Torque between
the engine and the gearbox is transmitted via
two independent clutches. They replace the

Related Topics

Popular Owner Manuals