the most suitable position and then
lock it in this position moving the lever
(A) again in position (2).
mirror is automatically set for daytime
use.
REAR-VIEW
MIRRORS
DOOR MIRRORS
INTERIOR MIRROR
23)
The mirror is fitted with a safety device
that causes its release in the event of a
violent impact with the passenger.
Lever (A) fig. 34 can be used to move
the mirror to two different positions:
normal or antiglare.
Proceed as follows:
IMPORTANT
select the mirror using selector (B)
fig. 35;
adjust the mirror using the joystick (A)
fig. 35 in the four directions.
21) All adjustments must be carried out
only with the car stationary and motor
stopped.
22) It is absolutely forbidden to carry
out any after-market operation involving
steering system or steering column
modifications (e.g.: installation of
anti-theft device) that could badly affect
performance and safety, invalidate
the warranty and also result in non-
compliance of the car with type-approval
requirements.
34
F0S1107
35
F0S1108
ELECTROCHROMIC
REAR-VIEW MIRROR
(where provided)
Folding the mirrors
When required (for example when
the mirror causes difficulty in narrow
spaces ) it is possible to fold the mirrors
manually moving them from the open
position (1) fig. 36 to the closed
position (2).
Some versions have an electrochromic
mirror with automatic anti-glare
function.
There is an ON/OFF button
on the lower part of the mirror
for activating/deactivating the
electrochromic function. When the
function is active, a LED on the mirror is
active. When reverse is engaged, the
36
English 
