KNOWING YOUR CAR -> ROOF RACK/SKI RACK for Your Fiat 500 SUV Second Generation (2020-2025)

charging phase, this will automatically  
be interrupted.  
not all closed correctly and the engine  
is not on.  
The wireless charging system is  
enabled when the car is in running  
condition and the vehicle battery is  
sufficiently charged.  
A
WARNING Do not place contactless  
cards (RFID), credit cards or metal  
objects in the charging compartment.  
By interacting with the wireless charger  
system and placing the mobile phone  
in the specific housing, the user will  
be informed by means from LED  
(A) fig. 85indicating the state of the  
wireless charging system:  
WARNING To avoid damaging or  
tearing the surface of the charging  
compartment, do not place sharp  
and/or pointed objects or objects other  
than a mobile phone in it.  
83  
F0S1210  
WIRELESS CHARGING  
SYSTEM– WCPM  
(Wireless Charge Pad  
Module)  
"Your phone is being charged" blue  
LED: this is displayed when the mobile  
phone is positioned correctly in the  
wireless charging compartment and the  
system is activated correctly;  
"Phone fully charged" green LED: this  
is displayed when the mobile phone  
has completed charging its battery (if  
suitable to transmit the information);  
"Object not allowed" red LED: this  
is displayed when a phone that is not  
enabled for wireless charging or an  
object that is not permitted (e.g. the  
ignition key) is placed (e.g. ignition key,  
credit card, a coin);  
WARNING Not all mobile phone covers  
guarantee the correct charging of  
the phone. Check that charging is in  
progress after having placed the phone  
in the charging compartment.  
(where provided)  
The wireless charger system is  
activated automatically when a mobile  
®
phone Qi standard compatible is  
placed in the storage compartment (A)  
in fig. 84 on the central tunnel.  
NOTE The use of multiple wireless  
functions on the smartphone at the  
same time (Apple CarPlay/Android  
Auto and wireless charging), as  
indicated by the smartphone  
manufacturers, could cause it to  
overheat, resulting in a limitation of the  
active functions or its turning off. In this  
case, it is recommended to connect  
the system using the USB socket.  
"System error" red LED: this appears  
when there is a malfunction in the  
wireless charger system;  
"System not active" LED off: there  
are no objects in the compartment  
and/or the ignition device of the car in  
the OFF position and/or the doors are  
Correct positioning of the mobile  
phone  
84  
F0S1138  
To start charging wirelessly correctly,  
make sure your mobile phone is  
If the mobile phone is removed from  
the housing during the wireless  
69  
positioned completely within the green  
dotted area in fig. 85 with the display  
facing up and that the device does not  
cover the alert LED (A).  
WARNING: Use this product only  
for its intended use as described in  
this manual without tampering with or  
modifying the product in any way.  
Unintended use or damage of the  
product may result in the exposure to  
dangerous UV radiation. Even in small  
doses, UV radiation can cause harm to  
the eyes and skin  
Correct positioning: see fig. 86 (the  
LED identifies the positioning limit of  
the device);  
incorrect positioning: see fig. 87;  
WARNING: The UV-C light is  
87  
F0S1362  
intended for EXTERNAL USE ONLY.  
Under no circumstances should this  
product be operated with humans,  
plants, animals or living things  
WARNING: KEEP OUT OF REACH  
OF CHILDREN. Do not allow the device  
to be used as a toy  
WARNING: Ensure the glove box  
door is fully closed before starting the  
sanitising operation  
WARNING: Don’t try to override the  
operation and expose yourself to UVC  
Light  
WARNING: UV lamps are hot during  
and after use - Do not touch  
UV-C LIGHT  
(where provided)  
It is located on the top of the glovebox.  
The UV-C Light Operating Switch is  
located in the Central Console.  
Warnings & Disclaimers  
For your SAFETY and PROTECTION,  
it is very important for you to read and  
understand this user manual before  
use. Please pay particular attention  
to WARNING and CAUTION sections  
as they are designed to call particular  
attention to potential dangers when  
using the UV-C light  
85  
F0S1360  
The UV-C light is designed to use  
UV light to sanitise surface areas inside  
the glovebox. No chemicals are used in  
this process  
Read and save all notices, warnings  
and safety instructions received with  
the UV-C light.  
WARNING: This UV-C light is  
equipped with ultraviolet lamps. UV  
radiation is harmful to the eyes and  
skin. Do not attempt to observe the UV  
lamps directly  
The surfaces must be exposed  
directly to the UV rays to be sanitised.  
These rays do not penetrate materials  
such as fabric, paper or glass,  
therefore make sure that the objects  
86  
F0S1361  
70