Cruise Control (If Equipped)  
					Switching Cruise Control On  
					Press and release the cruise control button.  
					PRINCIPLE OF OPERATION  
					Cruise control allows you to control your  
					speed using the switches on the steering  
					wheel. You can use cruise control when  
					you exceed 20 mph or 30 km/h.  
					The indicator appears in the  
					information display.  
					Note: The system cancels if your vehicle  
					speed drops below 10 mph / 16km/h under  
					the set speed when driving uphill.  
					Setting the Cruise Speed  
					1. Drive to desired speed.  
					2. Press and release SET+ or SET-.  
					Changing the Set Speed  
					3. Take your foot off the accelerator  
					Press and release SET + or SET -. When  
					pedal.  
					you select km/h as the display  
					4. The indicator changes color in the  
					information display.  
					measurement in the information display  
					the set speed changes in 1km/h  
					increments. When you select mph as the  
					display measurement in the information  
					display the set speed changes in 1 mph  
					increments.  
					Changing the Set Speed  
					•
					Press and release SET+ or SET-. When  
					you select km/h as the display  
					measurement in the information  
					display the set speed changes in  
					approximately 1 km/h increments.  
					When you select mph as the display  
					measurement in the information  
					display the set speed changes in  
					approximately 1 mph increments.  
					USING CRUISE CONTROL  
					WARNING: Do not use cruise  
					control on winding roads, in heavy traffic  
					or when the road surface is slippery. This  
					could result in loss of vehicle control,  
					serious injury or death.  
					•
					•
					Press the accelerator or brake pedal  
					until you reach the desired speed. Press  
					and release SET+ or SET-.  
					Press and hold SET+ or SET-. Release  
					the control when you reach the desired  
					speed.  
					WARNING: When you are going  
					downhill, your vehicle speed could  
					increase above the set speed. The  
					system does not apply the brakes.  
					Note: If you accelerate by pressing the  
					accelerator pedal, the set speed will not  
					change. When you release the accelerator  
					pedal, your vehicle returns to the speed that  
					you previously set.  
					To help the system to maintain the set  
					speed when going downhill, downshift to  
					a lower gear.  
					Note: The system cancels if your vehicle  
					speed drops below 10 mph (16 km/h) under  
					the set speed when driving uphill.  
					Canceling the Set Speed  
					Press and release CAN or tap the brake  
					pedal. The set speed does not erase.  
					The cruise controls are on the steering  
					Resuming the Set Speed  
					wheel.  
					Press and release RES.  
					167  
					EcoSport (CBW) Canada/United States of America, Vehicles Built From: 17-06-2019, LN1J-19A321-ZFA enUSA, Edition date: 201904, First-Printing