Seats  
					The rear center head restraint consists of:  
					After the head restraint reaches the  
					forward-most tilt position, pivot it forward  
					again to release it to the rearward, un-tilted  
					position.  
					A
					An energy absorbing head  
					restraint.  
					B
					C
					Two steel stems.  
					Folding the Rear Seat Outermost  
					Guide sleeve unlock and remove  
					Head Restraint  
					button.  
					1. Press and hold button E.  
					2. Pull the head restraint back up to reset.  
					Raising the Head Restraint  
					Pull the head restraint up.  
					Removing the Head Restraint  
					Lowering the Head Restraint  
					1. Press and hold button C.  
					2. Push the head restraint down.  
					Removing the Front Seat Head  
					Restraint and the Rear Seat Outermost  
					Head Restraint  
					1. Pull the head restraint up until it  
					reaches its highest position.  
					Tilting the Front Seat Head  
					Restraint(If Equipped)  
					2. Press and hold buttons C and D.  
					3. Pull the head restraint up.  
					The front head restraint tilts for extra  
					comfort. To tilt the head restraint, do the  
					following:  
					Removing the Rear Seat Center Head  
					Restraint  
					1. Pull the head restraint up until it  
					reaches its highest position.  
					2. Press and hold buttons C.  
					3. Pull the head restraint up.  
					Installing the Head Restraint  
					Align the steel stems into the guide sleeves  
					and push the head restraint down until it  
					locks.  
					MANUAL SEATS  
					WARNING: Do not adjust the  
					driver seat or seat backrest when your  
					vehicle is moving. This may result in  
					sudden seat movement, causing the loss  
					of control of your vehicle.  
					1. Adjust the seat backrest to an upright  
					driving or riding position.  
					2. Pivot the head restraint forward toward  
					your head to the desired position.  
					117  
					EcoSport (CBW) Canada/United States of America, Vehicles Built From: 17-06-2019, LN1J-19A321-ZFA enUSA, Edition date: 201904, First-Printing