Get Seatbelts -> Fastening the Seatbelts Guide for Ford Ecosport SUV 2020

Seatbelts

•

Seatbelt pretensioner at the front

outboard seating positions.

Belt tension sensor at the front

outboard passenger seating position.

· Seatbelt warning light and

chime.

· Crash sensors and monitoring

system with readiness indicator.

The seatbelt pretensioners at the front

seating positions are designed to tighten

the seatbelts when activated. In frontal

and near-frontal crashes, the seatbelt

pretensioners may be activated alone or,

if the crash is of sufficient severity, together

with the front airbags. The pretensioners

will activate when the Safety Canopy is

deployed.

2. To unfasten, press the release button

and remove the tongue from the

buckle.

Using the Sliding Clip (If Equipped)

FASTENING THE SEATBELTS

The front outboard and rear safety

restraints in the vehicle are combination

lap and shoulder belts.

Slide the clip away from the seatbelt

tongue so there is no loose webbing when

an occupant or child restraint is fastened.

You can also use the sliding clip to raise

the seatbelt tongue and prevent it from

rattling or to ease access to the seatbelt

tongue.

1. Insert the belt tongue into the proper

buckle (the buckle closest to the

direction the tongue is coming from)

until you hear a snap and feel it latch.

Make sure you securely fasten the

tongue in the buckle.

EcoSport (CBW) Canada/United States of America, Vehicles Built From: 17-06-2019, LN1J-19A321-ZFA enUSA, Edition date: 201904, First-Printing

Seatbelts

All safety restraints in the vehicle are

Using Seatbelts During Pregnancy

combination lap and shoulder belts. The

driver seatbelt has the vehicle sensitive

locking mode. The front outboard

WARNING: Always ride and drive

with your seatback upright and properly

fasten your seatbelt. Fit the lap portion

of the seatbelt snugly and low across

the hips. Position the shoulder portion of

the seatbelt across your chest. Pregnant

women must follow this practice. See

the following figure.

passenger and rear seat seatbelts have

both the vehicle sensitive locking mode

and the automatic locking mode.

Vehicle Sensitive Mode

This is the normal retractor mode, which

allows free shoulder belt length

adjustment to your movements and

locking in response to vehicle movement.

For example, if the driver brakes suddenly

or turns a corner sharply, or the vehicle

receives an impact of about 5 mph

(8 km/h) or more, the combination

seatbelts lock to help reduce forward

movement of the driver and passengers.

In addition, the retractor is designed to lock

if you pull the webbing out too quickly. If

the seatbelt retractor locks, slowly lower

the height adjuster to allow the seatbelt

to retract. If the retractor does not unlock,

pull the seatbelt out slowly then feed a

small length of webbing back toward the

stowed position. For rear seatbelts, recline

the rear seat backrest or push the seat

backrest cushion away from the seatbelt.

Feed a small length of webbing back

toward the stowed position.

Pregnant women should always wear their

seatbelt. Position the lap belt portion of a

combination lap and shoulder belt low

across the hips below the belly and worn

as tight as comfort allows. Position the

shoulder belt to cross the middle of the

shoulder and the center of the chest.

Automatic Locking Mode

Seatbelt Locking Modes

In this mode, the shoulder belt

automatically pre-locks. The belt retracts

to remove any slack in the shoulder belt.

The automatic locking mode is not

available on the driver seatbelt.

WARNING: You must replace the

seatbelt if the automatic locking

retractor or any other seatbelt function

is not operating correctly. Failure to

replace the seatbelt and retractor

assembly could increase the risk of injury

in a crash.

EcoSport (CBW) Canada/United States of America, Vehicles Built From: 17-06-2019, LN1J-19A321-ZFA enUSA, Edition date: 201904, First-Printing

Seatbelts

When to Use the Automatic Locking

SEATBELT HEIGHT

Mode

ADJUSTMENT(IF EQUIPPED)

Use this mode when you install a child

safety seat, except a booster seat, in the

passenger front or rear seating positions.

Properly restrain children 12 years old and

under in a rear seating position whenever

possible. See Child Safety (page 18).

WARNING: Position the seatbelt

height adjuster so that the seatbelt rests

across the middle of your shoulder.

Failure to adjust the seatbelt correctly

could reduce its effectiveness and

increase the risk of injury in a crash.

How to Use the Automatic Locking

Mode

1. Buckle the combination lap and

shoulder belt.

1. Pull the button and slide the height

adjuster up or down.

2. Release the button and pull down on

the height adjuster to make sure it is

locked in place.

2. Grasp the shoulder portion and pull

downward until you pull the entire belt

out. As the belt retracts, you will hear

a clicking sound. This indicates the

seatbelt is now in the automatic

locking mode.

SEATBELT WARNING LAMP

AND INDICATOR CHIME

This lamp illuminates and an

indicator chime will sound if the

driver seatbelt has not been

fastened when the vehicle's ignition is

turned on.

How to Disengage the Automatic

Locking Mode

Unbuckle the combination lap and

shoulder belt and allow it to retract

completely to disengage the automatic

locking mode and activate the vehicle

sensitive (emergency) locking mode.

EcoSport (CBW) Canada/United States of America, Vehicles Built From: 17-06-2019, LN1J-19A321-ZFA enUSA, Edition date: 201904, First-Printing

Download User Manual App

Seatbelts -> Fastening the Seatbelts for Your Ford Ecosport SUV 2020

Related Topics

Popular Owner Manuals

Latest Owner Manuals