Windows and Mirrors  
					One-Touch Up(If Equipped)  
					POWER WINDOWS  
					Lift the switch fully and release it. Press or  
					lift it again to stop the window.  
					WARNING: Do not leave children  
					Bounce-Back(If Equipped)  
					The window will stop automatically while  
					closing. It reverses some distance if there  
					is an obstacle in the way  
					unattended in your vehicle and do not  
					let them play with the power windows.  
					Failure to follow this instruction could  
					result in personal injury.  
					WARNING: When closing the  
					power windows, verify they are free of  
					obstruction and make sure that children  
					and pets are not in the proximity of the  
					window openings.  
					Overriding the Bounce-Back Feature  
					WARNING: If you override  
					bounce-back, the window does not  
					reverse if it detects an obstacle. Take  
					care when closing the windows to avoid  
					personal injury or damage to your  
					vehicle.  
					Note: If the power window is operated  
					many times on a short period the switch  
					may be inactivated for some moment to  
					avoid overheat on power window system.  
					1. Close the window twice until it reaches  
					the point of resistance and let it  
					reverse.  
					2. Close the window a third time to the  
					point of resistance. You disabled the  
					bounce-back feature and you can now  
					close the window manually. The  
					window travels past the point of  
					resistance and you can close it fully.  
					Note: : Contact an Authorized Dealer as  
					soon as possible if the window does not  
					close after the third attempt.  
					The window reaches the desired position.  
					Note: You may hear a pulsing noise when  
					just one of the windows is open. Lower the  
					opposite window slightly to reduce this  
					noise.  
					The window travels up with no  
					bounce-back protection. The windows  
					stops if you release the switch before the  
					window closes fully.  
					Press the switch to open the window. Lift  
					the switch to close the window.  
					Resetting the One-Touch and  
					Bounce-Back Feature (if equipped)  
					One-Touch Down (If Equipped)  
					Note: The bounce-back feature remains  
					Press the switch fully and release it. Press  
					turned off until you reset the memory.  
					again or lift it to stop the window.  
					If you have disconnected the battery, you  
					must reset the bounce-back memory for  
					driver window.  
					84  
					EcoSport (CBW) Canada/United States of America, Vehicles Built From: 17-06-2019, LN1J-19A321-ZFA enUSA, Edition date: 201904, First-Printing