Parking Aids (If Equipped)  
					Note: When a trailer is connected to the  
					PRINCIPLE OF OPERATION  
					vehicle, the Rear Sensing System may  
					detect the trailer and therefore provide  
					warnings. It is suggested that the driver  
					disables the Rear Sensing System when a  
					trailer is connected to the vehicle to prevent  
					these warnings.  
					WARNING: The system may not  
					detect objects with surfaces that absorb  
					reflection. Always drive with due care  
					and attention. Failure to take care may  
					result in a crash.  
					We recommend that you take some time  
					to get to know the system and its  
					limitations by reading this section.  
					The sensing system warns the driver of  
					obstacles within a certain range of your  
					vehicle. The system automatically turns  
					on each time you switch the ignition on.  
					WARNING:To help avoid personal  
					injury, always use caution when in  
					reverse (R) and when using the sensing  
					system.  
					The system may provide display or sound  
					warnings when the detected obstacle is  
					12 in (30 cm) or less from the bumper.  
					WARNING: The system may not  
					detect small or moving objects,  
					particularly those close to the ground.  
					The system can be switched off through  
					the information display menu or from the  
					pop-up message that appears once you  
					shift the transmission into reverse (R). If  
					your vehicle is equipped with a front  
					sensing system, you can switch the system  
					off using the parking aid button. See  
					General Information (page 93).  
					If a fault is present in the system, a warning  
					message appears in the information  
					display and does not allow you to switch  
					the system on.  
					Note: Certain add-on devices installed  
					around the rear fascia such as large trailer  
					hitches, bike or surfboard racks or certain  
					add-on devices installed around the front  
					fascia such as license plate brackets or  
					frames, bumper covers, bumper guards or  
					any other device that may block the normal  
					detection zone of the system, may create  
					false beeps.  
					Note: In these cases the add-on devices  
					must be removed in order to prevent the  
					false beeps.  
					Note: Keep the sensors free from snow, ice  
					and large accumulations of dirt. Blocked  
					sensors may affect system accuracy. Do  
					not clean the sensors with sharp objects.  
					See Information Messages (page 96).  
					REAR PARKING AID  
					The rear parking aid sensors automatically  
					Note: If your vehicle sustains damage to  
					the bumper or fascia, leaving it misaligned  
					or bent, the sensing zone may be altered  
					causing inaccurate measurement of  
					obstacles or false alarms.  
					turn on when you shift into reverse (R).  
					162  
					EcoSport (CBW) Canada/United States of America, Vehicles Built From: 17-06-2019, LN1J-19A321-ZFA enUSA, Edition date: 201904, First-Printing