Get Security -> Passive Anti-Theft System Guide for Ford Ecosport SUV 2020

Security

Automatic Disarming

PASSIVE ANTI-THEFT

SYSTEM

Principle of Operation

The system prevents someone from

starting the engine with an incorrectly

coded key.

Note: The system is not compatible with

non-Ford aftermarket remote start systems.

Use of these systems may result in engine

starting problems and a loss of security

protection

When you switch the ignition on, the engine

immobilizer will disarm automatically if a

correctly coded key is used. If you are

unable to start the engine with a correctly

coded key, have your vehicle checked by

an Authorized Dealer.

Replacement Keys

Note: Your vehicle comes equipped with

two remote controls with a folding key blade

or two intelligent access keys.

The remote controls with a folding key

blade functions as a programmed ignition

key that operates all the locks and starts

the vehicle, as well as a remote control.

The intelligent access key functions as a

programmed key that operates the driver

door lock and activates the intelligent

access with push button start system, as

well as a remote control.

If your programmed transmitters or

standard SecuriLock® coded keys are lost

or stolen and you do not have an extra

coded key, you will need to have your

vehicle towed to an authorized dealer. You

need to erase the key codes from your

vehicle and program new coded keys.

Store an extra programmed key away from

the vehicle in a safe place to help prevent

any inconveniences. See your authorized

dealer to purchase additional spare or

replacement keys. Have replacement keys

coded together with recoding your

remaining keys.

Note: Have all of your remaining keys

erased and recoded if you lose a key. Have

replacement keys coded together with

recoding your remaining keys. See an

authorized dealer for further information.

Note: Do not shield your keys with metal

objects. This may prevent the receiver from

recognizing a coded key.

Note: Metallic objects, electronic devices

or a second coded key on the same key

chain may result in vehicle starting

problems, especially if they are too close to

the key when starting your vehicle. Prevent

these objects from touching the coded key

when starting your vehicle. Switch the

ignition off, move all objects on the key

chain away from the coded key and restart

your vehicle if a problem occurs.

Note: Do not leave a duplicate coded key

in your vehicle. Always take your keys and

lock all doors when leaving your vehicle.

SecuriLock®

The system is an engine immobilization

system. It is designed to help prevent the

engine from being started unless a coded

key programmed to your vehicle is used.

Using the wrong key may prevent the

engine from starting. A message may

appear in the information display.

If you are unable to start the engine with a

correctly coded key, a malfunction has

happened and a message may appear in

the information display.

Automatic Arming

When you switch the ignition off the engine

immobilizer will arm automatically after a

short time.

EcoSport (CBW) Canada/United States of America, Vehicles Built From: 17-06-2019, LN1J-19A321-ZFA enUSA, Edition date: 201904, First-Printing

Security

Programming a Spare Remote Control

7. After at least 3 seconds but within 10

seconds of switching the ignition off

and removing the previously

With a Folding Key Blade

You can program your own integrated

keyhead transmitter or standard

SecuriLock coded keys to your vehicle.

This procedure will program both the

vehicle immobilizer keycode and the

remote entry portion of the remote control

to your vehicle.

programmed coded key, insert the new

unprogrammed key into the ignition.

8. Switch the ignition from off to on. Keep

the ignition on for at least six seconds.

9. Remove the newly programmed coded

key from the ignition.

You must have two previously

If you have successfully programmed the

coded key, it will start your vehicle and

operate the remote entry system.

programmed coded keys and the new

unprogrammed key readily accessible.

Contact an authorized dealer to have the

spare key programmed if two previously

programmed keys are not available.

Make sure that the ignition is switched off

before beginning this procedure. Carry out

all steps within 30 seconds of starting the

sequence. Stop and wait for at least one

minute before starting again if you carry

out any steps out of sequence.

If programming was unsuccessful, wait 10

seconds and repeat Steps 1 through 8.

If programming remains unsuccessful,

have your vehicle checked by an authorized

dealer.

Wait 20 seconds and repeat Steps 1

through 9 to program an additional key.

Programming a Spare Intelligent

Access Key

Note: You can program a maximum of six

coded keys to your vehicle.

Note: You can program a maximum of four

Read and understand the entire procedure

keys to your vehicle.

before you begin.

You must have two previously

1. Insert the first previously programmed

coded key into the ignition.

2. Switch the ignition from off to on. Keep

the ignition on for at least 3 seconds,

but no more than 10 seconds.

programmed intelligent access keys inside

your vehicle and the new unprogrammed

intelligent access key readily accessible.

You can purchase replacement keys or

remote controls from an authorized dealer.

Make sure that the ignition is switched off

before beginning this procedure. Make sure

that you close all the doors before

3. Switch the ignition off and remove the

first coded key from the ignition.

4. After at least 3 seconds but within 10

seconds of switching the ignition off,

insert the second previously coded key

into the ignition.

5. Switch the ignition from off to on. Keep

the ignition on for at least 3 seconds,

but no more than 10 seconds.

6. Switch the ignition off and remove the

second previously programmed coded

key from the ignition.

beginning and that they remain closed

throughout the procedure. Carry out all

steps within 30 seconds of starting the

sequence. Stop and wait for at least one

minute before starting again if you carry

out any steps out of sequence.

Read and understand the entire procedure

before you begin.

Remove the key blade from the

transmitter.

EcoSport (CBW) Canada/United States of America, Vehicles Built From: 17-06-2019, LN1J-19A321-ZFA enUSA, Edition date: 201904, First-Printing

Security

5. Wait five seconds and then press the

push button ignition switch again.

6. Remove the intelligent access key.

7. Within 10 seconds, place a second

programmed intelligent access key in

the backup slot and press the push

button ignition switch.

8. Wait five seconds and then press the

push button ignition switch again.

9. Remove the intelligent access key.

10. Wait five seconds, then place the

unprogrammed intelligent access key

in the backup slot and press the push

button ignition switch.

Programming is now complete. Check that

the remote control functions operate and

your vehicle starts with the new intelligent

access key.

If programming was unsuccessful, wait 10

seconds and repeat steps 1 through 6. If it

still does not work, take your vehicle to an

authorized dealer.

1. Open the floor console storage

compartment lid.

2. Remove the tray.

ANTI-THEFT ALARM

Alarm System(If Equipped)

Perimeter Alarm (if equipped)

The perimeter alarm is a deterrent against

unauthorized access to your vehicle

through the doors and the hood.

Triggering the Alarm

Once armed, the alarm is triggered in any

of the following ways:

•

If someone opens a door, the tailgate

or the hood without a valid key or

remote control.

If someone switches your vehicle on

3. Place the key into the backup slot.

4. Press the push button ignition switch.

without a correctly coded key.

EcoSport (CBW) Canada/United States of America, Vehicles Built From: 17-06-2019, LN1J-19A321-ZFA enUSA, Edition date: 201904, First-Printing

Download User Manual App

Security -> Passive Anti-Theft System for Your Ford Ecosport SUV 2020

Related Topics

Popular Owner Manuals

Latest Owner Manuals