
5-38 Starting and driving
When the electric power steering warning light
illuminates with the engine running, the power assist
for the steering will cease operation. You will still have
control of the vehicle. However, greater steering effort
is needed, especially in sharp turns and at low speeds.
GUID-C25737EF-56EA-4 67D-853B-730CA88564CA
The brake system has two separate hydraulic circuits. If
one circuit malfunctions, you will still have braking
ability at two wheels.
BRAKE PRECAUTIONS
GUID-5ED7A9E3-DD89-4696-93AF-56B5DB3C0003
GUID-245EE7F6-3D50-464D-A039-2DD804274920
The brake booster aids br aking by using engine
vacuum. If the engine stops, you can stop the vehicle
by depressing the foot brake pedal. However, greater
foot pressure on the foot brake pedal will be required
to stop the vehicle. The stopping distance will be
longer.
If the engine is not running or is turned off while driving,
the power assisted brakes will not function. Braking
will be harder.
WARNING:
Do not coast with the engine stopped.
When the brake pedal is depressed slowly and firmly,
you may hear a clicking n oise and feel a slig ht
pulsation. This is normal and indicates that the Brake
Assist System is operating.
Using brakes
GUID-6C148A06-8EF3 -4376-A202-3C898260E0FA
Avoid resting your foot on the foot brake pedal while
driving. This will overheat the brakes, wear out the
brake linings/pads faster, and increase fuel consump-
tion.
To help reduce brake wear and to prevent the brakes
from overheating, reduce speed and downshift to a
lower gear before going down a slope or long grade.
Overheated brakes may reduce braking performance
and could result in loss of vehicle control.
While driving on a slippery surface, be careful when
braking, accelerating or downshifting. Abrupt braking
or acceleration could cause the wheels to skid and
result in an accident.
Wet brakes
GUID-F8A6E2E5-8884-4944-AC78-1DDCCC3675A6
When the vehicle is washed or driven through water,
the brakes may get wet. As a result, your braking
distance will be longer and the vehicle may pull to one
side during braking.
To dry the brakes, drive the vehicle at a safe speed
while lightly depressing the foot brake pedal to heat up
the brakes. Do this until the brakes return to normal.
Avoid driving the vehicle at high speeds until the
brakes function correctly.
Driving uphill
GUID-B5D60729-0 9B7-4553-95E5-09E85613FEDC
When starting on a steep grade, it is sometimes
difficult to operate both the brake and clutch (for
Manual Transmission model). Apply the parking brake
to hold the vehicle. Do not slip the clutch. When ready
to st art, slowly release the parking brake while
depressing the accelerator pedal and releasing the
clutch pedal.
Driving downhill
GUID-4D5CC9CA-C086-4BF6-87EA-A672BD9EDBCE
The engine braking action is effective for controlling
the vehicle while descending hills. For Manual Trans-
mission (MT) model, the shift lever should be placed in
the lower speed position prior to descending. For
Automatic Transmission (AT) model, the “1” or “2”
position should be selected. For Continuously Variable
Transmission (CVT) model, the “L” position should be
selected.
BRAKE SYSTEM