
. If the vehicle batte ry is discharged, the
ignitio n switc h cannot be switched from
the “LOCK” position, and if the steering lock
is engaged, the steering wheel cannot be
mov ed. Charge the battery as soon as
possible. (See “Jump starting” (P.6-9).)
Operating range
GUID-46C0E5E9-CA13-4ED3-9349-A70E14CFB689
SSD0436
The Intelligent Key can only be used for starting the
engine when the Intelligent Key is within the specified
operating range
*
1
.
When the Intelligent Key battery is almost discharged
or strong radio waves are present near the operating
location, the Intelligent Key system’s operating range
becomes narrower and may not function properly.
If the Intelligent Key is within the operating range, it is
possible for anyone, even someone who does not carry
the Intelligent Key, to push the ignition switch to start
the engine.
. The luggage room area is not included in the
operating range, but the Intelligent Key may
function.
. If the Intelligent Key is placed on the instrument
panel, inside the glove box, door pocket or the
corner of the interior compartment, the Intelligent
Key may not function.
. If the Intelligent Key is placed near the door or
window outside the vehicle, the Intelligent Key
may function.
Automatic transmission (AT)/Continuously
Variable Transmission (CVT) model
GUID-957EB82F-1A5E-4B31-B269-3BA742F81C13
The ignition lock is designed so that the ignition switch
cannot be switched to the “LOCK” position until the
shift lever is moved to the “P” (Park) position. When
pushing the ignition switch to the “OFF” position, make
sure the shift lever is in the “P” (Park) position.
Type A (model with dot matrix display):
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the ignition switch cannot be switched to the
“LOCK” position:
1. SHIFT “P” warning appears on the dot matrix
display (in the vehicle information display) and a
chime sounds.
2. Move the shift lever to the “P” (Park) position.
3. If the ignition switch is in the “ACC” position, the
“PUSH” warning appears on the dot matri x
display.
4. Push the ignition switch. The ignition switch is
switched to the “ON” position.
5. The “PUSH” warning appears again on the dot
matrix display.
6. Push the ignition switch. The ignition switch is
switched to the “OFF” position.
7. Open the door. The ignition switch will change to
the “LOCK” position.
For warnings and indicators on the Vehicle information
display, see “Vehicle information display” (P.2-20).
Type B (model without dot matrix display):
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
1. Move the shift lever to the “P” (Park) position.
2. Push the ignition switch to the “OFF” position.
3. Open the door. The ignition switch will change to
the “LOCK” position.
If the ignition switch is switched to the “LOCK”
position, the shift lever cannot be moved from the “P”
(Park) position. The shift lever can be moved if the
ignition switch is in the “ON” position with the foot
brake depressed.
STEERING LOCK
GUID-2F58254E-F7F8-483C-94EB-A4433CF3D958
The ignition switch is equipped with an anti-theft
steering lock device.
To lock steering wheel
GUID-EEEBBE44-96AA-4552-989C-C8364A16DAAC
1. Push the ignition switch to the “OFF” position
where the ignition switch position indicator will not
illuminate.
2. Open or close the door. The ignition switch turns
to the “LOCK” position.
3. Turn the steering wheel 1/6 of a turn to the right or
left from the straight up position.
To unlock steering wheel
GUID-E7243AC8-9F32-4B57-88C4-9F4592DA19 D0
Push the ignition switch, and the steering wheel will be
automatically unlocked.
CAUTION:
. If the battery of the vehicle is discharged, the
push-button ignition switch cannot be
switched from the “LOCK” position.
. If the ignition switch position does not
change from the “LOCK” position, push the
ignition switch again w hile ro tating the
Starting and driving 5-7