2004-2009 Nissan Micra 4 Door Starting and driving -> Vehicle Dynamic Control (VDC) system (for Australia and New Zealand) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Starting and driving -> Vehicle Dynamic Control (VDC) system (for Australia and New Zealand) for Your Nissan Micra 4 Door Third Generation (2004-2009)

brakes the spinning wheel, which distributes the
driving power to the other drive wheel. If the vehicle
is operated with the VDC OFF switch pushed and the
VDC system turned off, all VDC systems will be turned
off. The BLSD system will still operate with the VDC
system off. If the BLSD system is activated, the “SLIP”
indicator light will blink and you may hear a clunk noise
and/or feel a pulsation in the foot brake pedal. This is
normal and is not an indication of a malfunction. While
the VDC system is operating, you may feel a pulsation
in the foot brake pedal and hear a noise or feel a
vibration from under the hood. This is normal and
indicates that the VDC system is working properly.
The VDC system computer has a built-in diagnostic
feature that tests the system each time you start the
engine and move the vehicle at a low speed forward or
backward. When the self-test occurs, you may hear a
“clunk” noise and/or feel a pulsation in the foot brake
pedal. This is normal and is not an indication of a
malfunction.
VEHICLE DYNAMIC CONTROL (VDC) OFF
SWITCH
GUID-A27A29D3-3727-4957-BCED-5BF88952872D
SIC1881
The vehicle should be driven with the Vehicle Dynamic
Control (VDC) system ON for most driving conditions.
When the vehicle is stuck in mud or snow, the VDC
system reduces the engine output to reduce wheel
spin. The engine speed will be reduced even if the
accelerator is depressed to the floor. If maximum
engine power is needed to free a stuck vehicle, turn
the VDC system off.
To turn off the Vehicle Dynamic Control (VDC) system,
push the VDC OFF switch. The
indicator light will
illuminate.
Push the VDC OFF switch again or restart the engine
to turn ON the system.
GUID-1CE921CF-0C35-4 69C-98F6-025CE0172659
WARNING:
. The VDC system is designed to help the
driver maintain stability but does not pre-
vent accidents due to abrupt steering opera-
tion at high speeds or by carele ss or
dangerous driving techniques. Reduce vehi-
cle speed and be especially careful when
driving and cornering on slippery surfaces
and always drive carefully.
. Do not modify the vehicle’s suspension. If
suspension parts such as shock absorbers,
struts, springs, stabilizer bars, bushings and
wheels are not NISSAN recommended for
your vehicle or are extremely deteriorated,
the VDC system may not operate properly.
This could adversely affect vehicle handling
performance, and the VDC warning light
may illuminate.
. If brake related parts such as brake pads,
rotors and calipers are not NISSAN recom-
mended or are extremely deteriorated, the
VDC system may not operate properly and
the VDC warning light
may illuminate.
. If engine control related parts are not
NISSAN recommended or are extremely
deteriorated, the VDC warning light
may illuminate.
. When driving on extremely inclined surfaces
such as higher banked corners, the VDC
system may not operate properly and the
VDC warning light
may illuminate. Do
not drive on these types of roads.
. When driving on an unstable surface such as
a turntable, ferry, elevator or ramp, the VDC
warning light
may illuminate. This is not
Starting and driving 5-25
VEHICLE DYNAMIC CONTROL (VDC)
SYSTEM (for Australia and New
Zealand)
5-26 Starting and driving
a malfunct ion. Restart the engine afte r
driving onto a stable surface.
. If wheels or tires other than the NISSAN
recommended ones are used, the VDC
system may not operate properly and the
VDC warning light
may illuminate.
. The VDC system is not a substitute for winter
tires or tire chains on a snow covered road.
The Vehicle Dynamic Control (VDC) system uses
various sensors to monitor driver inputs and vehicle
motion. Under certain driving conditions, the VDC
system helps to perform the following functions.
. Controls brake pressure to reduce wheel slip on
one slipping drive wheel so power is transferred to
a non slipping drive wheel on the same axle.
. Controls brake pressure and engine output to
reduce drive wheel slip based on vehicle speed
(traction control function).
. Controls brake pressure at individual wheels and
engine output to help the driver maintain control of
the vehicle in the following conditions:
— understeer (vehicle tends to not follow the
steered path despite increased steering input)
— oversteer (vehicle tends to spin due to certain
road or driving conditions).
The VDC system can help the driver to maintain control
of the vehicle, but it cannot prevent loss of vehicle
control in all driving situations.
When the VDC system operates, the VDC warning
light
in the instrument panel flashes so note the
following:
. The road may be slippery or the system may
determine some action is required to help the
vehicle on the steered path.
. You may feel a pulsation in the brake pedal and
hear a noise or vibration from under the hood. This
is normal and indicates that the VDC system is
working properly.
. Adjust your speed and driving to the ro ad
conditions.
If a malfunction occurs in the system, the VDC warning
light
illuminates in the instrument panel. The VDC
system automatically turns off.
The VDC OFF switch is used to turn off the VDC
system. The VDC off indicator light
illuminates to
indicate the VDC system is off. When the VDC OFF
switch is used to turn off the system, the VDC system
still operates to prevent one drive wheel from slipping
by transferring power to a non slipping drive wheel.
The VDC warning light
flashes if this occurs. All
other VDC functions are off and the VDC warning light
will not flash. The VDC system is automatically
reset to on when the ignition switch is placed in the
“OFF” position then back to the “ON” position.
See “Vehicle Dynamic Control (VDC) warning light (for
Australia and New Zealand)” (P.2-16) and “Vehicle
Dynamic Control (VDC) off indicator light” (P.2-18).
The computer has a built-in diagnostic feature that
tests the system each time you start the engine and
move the vehicle forward or in reverse at a slow speed.
When the self-test occurs, you may hear a “clunk”
noise and/or feel a pulsation in the brake pedal. This is
normal and is not an indication of a malfunction.
VEHICLE DYNAMIC CONTROL (VDC) OFF
SWITCH
GUID-941C52A4-286C-4DB0-AFFC-1563619EE044
SSD1153
The vehicle should be driven with the Vehicle Dynamic
Control (VDC) system ON for most driving conditions.
When the vehicle is stuck in mud or snow, the VDC
system reduces the engine output to reduce wheel
spin. The engine speed will be reduced even if the
accelerator is depressed to the floor. If maximum
engine power is needed to free a stuck vehicle, turn
the VDC system off.
To turn off the Vehicle Dynamic Control (VDC) system,
push the VDC OFF switch. The
indicator light will
illuminate.
Push the VDC OFF switch again or restart the engine
to turn ON the system.

Related Topics

Popular Owner Manuals