5-20 Starting and driving
. when the accelerator pedal is depressed.
. when the shift lever is in the “R” (Reverse)
position.
. when the fan speed control dial is in any position
other than “OFF” (0) while the air flow control dial
is in the front defogger position (manual air
conditioner).
. when the front defogger switch is on (automatic
air conditioner).
. when the rear defogger switch is on.
. when the Idling Stop OFF switch is turned on.
. when the electric power steering warning light, the
Anti-lock Braking System (ABS) warning light, or
the Vehicle Dynamic Control (VDC) warning light
(if equipped) illuminates.
. when the brake pedal is not fully depressed.
. when stopping the vehicle on steep sloping roads.
. when the power consumption is large.
. when the vehicle is traveling at altitudes higher
than 2000 m (6562 ft).
NOTE:
It may take some time until the Idling Stop
System activates under the following conditions:
. when the battery is discharged.
. when the outside temperature is low.
. when the batter y is replaced or the battery
terminal is disconnected for extended periods
and then reconnected.
NOTE:
The engine will not restart even if the brake
pedal is released while the Idling Stop System is
activated under the following condition:
. when the shift lever is in the “P” (Park) position.
NOTE:
The engine will restart without releasing the
brake pedal while the Idling Stop System is
activated under the following conditions:
. when the Idling Stop OFF switch is pushed.
. when the fan speed control dial is in any position
other than “OFF” (0) while the air flow control dial
is in the front defogger position (manual air
conditioner).
. when the front defogger switch is set to “ON”
(automatic air conditioner).
. when the rear defogger switch is set to “ON”.
. when the accelerator pedal is depressed.
. when the steering wheel is operated.
. when the battery capacity is low.
. when the power consumption is large.
. when the brake pedal is released on sloping roads
and the vehicle is moved.
. when the force to the brake pedal is reduced while
the shift lever is in the “D” (Drive) or “N” (Neutral)
position.
. when the shift lever is placed in the “L” (Low), “D”
(Drive) or “R” (Reverse) position from the “N” or
“P” position.
. when the negative pressure of the brake system is
not sufficiently applied by depressing the brake
pedal several times.
. when the driver’s seat belt is released or the
driver’s door is open.
Use this system while waiting at stoplight, etc. When
the vehicle is stopped for long periods of time, turn off
the engine.
When the engine hood is opened with the Idling Stop
System on, the engine will be in the normal stopped
state with the buzzer sounding. In this case, restart the
engine with the ignition switch.
When the engine is stopped by the Idling Stop
System, heating, cooling and dehumidifying functions
will be deactivated. To avoid the air conditioni ng
functions from being deactivated, turn off the Idling
Stop mode by pressing the Idling Stop OFF switch.
OPERATING IDLING STOP SYSTEM
NOTE:
The Idling Stop System indicator light illumi-
nates in the meter while driving if any of the
Idling Stop System conditions are met.
. When the brake pedal is depressed to stop
the vehicle with the shift lever in the “D”
(Drive) position, the engine will stop auto-
matically.
. When you release your foot from the brake
pedal, the engine will start automatically.
. The Idling Stop System indicator light and a
buzzer will inform you of the Idling Stop
System status. For more details, see “Stop/
Start System indicator light (if equipped for
Europe)/Idling Stop System indicator light
(for Hong Kong)” (P.2-18) or “Idling Stop
System reminder buzzer (for Hong Kong)”
(P.2-19).