2004-2009 Nissan Micra 4 Door Starting and driving -> Cruise control (if equipped) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Starting and driving -> Cruise control (if equipped) for Your Nissan Micra 4 Door Third Generation (2004-2009)

5-30 Starting and driving
Speed limiter malfunction
GUID-C39E8711-EE6C-4221-850A-2231CDF4D 761
Type B model:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
If the speed limiter malfunctions, the SET indicator light
on the instrument panel will blink. Turn the speed
limiter MAIN switch off and have the system checked
by a NISSAN dealer.
Type C model:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
If the speed limiter malfunctions, the SET indicator on
the vehicle information display will blink. Turn the
speed limiter MAIN switch off and have the system
checked by a NISSAN dealer.
GUID-CA276E64-38DA-4CCF-ADC4-3D4617C3E588
WARNING:
. Always observe the posted speed limits and
do not set the speed over them.
. Do not use the cruise control when driving
under the following conditions. Doing so
could cause a loss of vehicle control and
result in an accident.
— When it is not possible to keep the
vehicle at a constant speed
— When driving in heavy traffic
— When driving in traffic that varies speed
— When driving in windy areas
— When driving on winding or hilly roads
— When driving on slippery (rain, snow, ice,
etc .) roads
CAUTION:
On manual Transmission (MT) model, do not
shift to the “N” (Neutral) position without
depressing the clutch pedal when the cruise
control is operated. Should this occur, depress
the clutch pedal and turn the cruise control MAIN
switch off immediately. Failure to do so may
cause engine damage.
PRECAUTIONS ON CRUISE CONTROL
GUID-B1AE8EEF-7078-40AB-82DC-358EDB12995F
. If the cruise con tr ol system malfunctions, it
cancels automatically. The SET indicator and the
cruise control indicator light will blink to warn the
driver.
. If the engine coolant temper ature becomes
excessively high, the cruise control system will
be canceled automatically.
. If the SET indicator and cruise control indicator
light blink, turn off the cruise control MAIN switch
and have the system checked by a NISSAN
dealer.
. The SET indicator and cruise control indicator
light may blink when the cruise control MAIN
switch is turned on while pushing the RES+, SET
−, CANCEL switch. To properly set the cruise
control system, use the following procedures.
CRUISE CONTROL OPERATIONS
GUID-DF60F09D-4F46-4C86-9D91-055490ADB31D
The cruise control allows driving at speeds above 40
km/h (25 MPH) without keeping your foot on the
accelerator pedal.
The cruise control will automatically be canceled if the
vehicle slows down more than approximately 13 km/h
(8 MPH) below the set speed.
Moving the shift lever to the “N” (Neutral) position
(Continuously Variable Transmission model) or depres-
sing the clutch pedal (Manual Transmission model) will
cancel the cruise control and the SET indicator will
turn off.
The cruise control switches are located on the steering
wheel.
CRUISE CONTROL (if equipped)
SSD0891
1. RES/+ switch
2. SET/− switch
3. CANCEL switch
4. Cruise control MAIN switch
5. Speed limiter MAIN switch (For details, see
“Speed limiter (if equipped for Europe)” (P.5-28).)
Cruise control display and indicators (Type B
model)
GUID-2F9A21B0-2F26-44A2-A8D6-16BFD1BEC5DF
JVS0027X
The cruise control operating condition is shown on the
vehicle information display and instrument panel.
Vehicle information display:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
1. CRUISE indicator
2. Set speed indicator
Instrument panel:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
3. Cruise control indicator light
4. SET indicator light
Cruise control display and indicators (Type C
model)
GUID-41DAD620-68D8-4B71-9E44-9DD56766EAD1
JVS0028X
Vehicle information display:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
1. CRUISE indicator
2. SET indicator light
3. Set speed indicator light
Instrument panel:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
4. Cruise control indicator light
Turning on cruise control
GUID-6BA37096-769E-40E3-8899-77AF6559A97F
Push the cruise control MAIN switch. The cruise
control i ndicator light illumin ates. The set spee d
indicator shows “- - -”.
Setting cruising speed
GUID-2F50812A-448F-4C9F-8BF3-E4122114865C
1. Accelerate to the desired speed.
2. Push the SET− switch and release it.
3. The SET indicator light and set speed indicator
illuminate on the meter panel and the vehicle
information display.
4. Take your foot off the accelerator pedal.
The vehicle will maintain the set speed.
Passing another vehicle:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Depress the accelerator pedal to accelerate. After
releasing the accelerator pedal, the vehicle will return
to the previously set speed.
The vehicle may not maintain the set speed when
going up or down steep hills. In such cases, drive
without the cruise control.
Resetting to slower speed:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Use any one of the following methods to reset to a
slower speed.
. Lightly tap the foot brake pedal. When the vehicle
reaches the desired speed, push and release the
SET− switch.
. Push and hold the SET− switch. When the vehicle
reaches the desired speed, release the SET−
switch.
. Quickly push and release the SET− switch. This
will reduce the vehicle speed by about 1 km/h or 1
MPH.
Resetting to faster speed:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Use any one of the following methods to reset to a
faster speed.
. Depress the accelerator pedal. When the vehicle
reaches the desired speed, push and release the
SET− switch.
Starting and driving 5-31

Related Topics

Popular Owner Manuals