. The clutch pedal is depressed (for MT model).
. The brake pedal is released with the shift lever in
the "D"(Drive) or "N"(Neutral) position (for CVT
model).
. The shift lever is placed in the "L"(Low), "D"(Drive)
or "R"(Rever se) position from the "N" or "P"
position (for CVT model).
. The driver’s seat belt is unfastened, or the driver’s
door is open (for CVT model).
. The brake pedal is repeatedly pressed (to maintain
vehicle braking performance).
. The brake pedal is strongly depressed and then
released with the shift lever in the "P" (Park)
position, resulting in decreased vacuum pressure
of the brake booster (for CVT model).
. The battery voltage becomes low (due to electrical
load from other vehicle systems like headlights,
heaters, etc., or auxiliary devices connected to the
12 volt socket inside the vehicle).
. The vehicle speed is above about 2 km/h (1
MPH).
. The system is in front defogger mode. (automatic
air conditioner)
. The mode dial is in front defogger mode. (manual
air conditioner)
. The rear window defogger is operated.
NOTE:
The following conditions will prevent the Stop/
Start System from automatically restarting the
engine. Starting the engine by the ignition
switch is then necessary:
. The driver’s seat belt is unfastened, or
driver’s door is open (for MT model).
. The hood is open.
The Stop/Start System is always engaged at the start
of a journey (once the engine has been started). The
engine is automatically stopped and restarted during
the journey if conditions are suitable.
STOP/START SYSTEM DISPLAY AND IN-
DICATORS