2004-2009 Nissan Micra 4 Door Starting and driving -> Speed limiter (if equipped for Europe) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Starting and driving -> Speed limiter (if equipped for Europe) for Your Nissan Micra 4 Door Third Generation (2004-2009)

5-28 Starting and driving
the ESP system off.
To turn off the ESP system, push the ESP OFF switch
located on the lower side of the instrument panel.
The
indicator light will illuminate.
Push the ESP OFF switch again or restart the engine
to turn on the system.
GUID-E4B23E71-BE78-446C-B2E6-E1777649C0A7
The speed limiter allows you to set the desired vehicle
speed limit. While the speed limiter is activated, the
driver can perform normal braking and acceleration,
but the vehicle will not exceed the set speed.
WARNING:
. Always observe posted speed limits. Do not
set the speed over them.
. Always confirm the setting status of the
speed limiter on the vehicle information
display and instrument panel.
When the speed limiter is on, the cruise control cannot
be operated.
SPEED LIMITER OPERATIONS
GUID-3846061C-6CD2-491B-A17E-85B78B8637C0
Except for HR12DDR engine model: The speed limiter
can be set between 30 km/h and 170 km/h or 20 MPH
and 105 MPH.
For HR12DDR engine model (for MT model): The
speed limiter can be set between 30 km/h and 180
km/h or 20 MPH and 112 MPH.
For HR12DDR engine model (for CVT model): The
speed limiter can be set between 30 km/h and 170
km/h or 20 MPH and 105 MPH.
The speed limiter set switches are located on the
steering wheel.
SSD0891
1. RES/+ switch
2. SET/− switch
3. CANCEL switch
4. Cruise control MAIN s witch (For details, see
“Cruise control” (P.5-30).)
5. Speed limiter MAIN switch
(When this switch is pushed, the speed limiter
enters the standby mode. If the cruise control
system is on, the system will turn off and the
speed limiter enters the standby mode.)
Speed limiter display and indicators (Type B
model)
GUID-7FFB2EFF-CC3 9-4983-A020-783FC9244E73
JVS0019X
SPEED LIMITER (if equipped for
Europe)
The speed limiter operating condition is shown on the
vehicle information display and instrument panel.
Vehicle information display:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
1. LIMIT indicator
2. Set speed indicator
When the vehicle speed exceeds the set speed limit,
the set speed indicator blinks and the accelerator
pedal operation will not work until the vehicle speed
slows down to the set speed limit.
Instrument panel:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
3. Speed limiter indicator light
4. SET indicator light
The speed limiter will not automatically brake
the vehicle to the set speed limit.
Speed limiter display and indicators (Type C
model)
GUID-46A78D73-3FA6-46E5-BEBC-10AFFFBE6F3A
JVS0025X
The speed limiter operating condition is shown on the
vehicle information display and instrument panel.
Vehicle information display:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
1. LIMIT indicator
2. SET indicator light
3. Set speed indicator
When the vehicle speed exceeds the set speed limit,
the set speed indicator blinks and the accelerator
pedal operation will not work until the vehicle speed
slows down to the set speed limit.
Instrument panel:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
4. Speed limiter indicator light
The speed limiter will not automatically brake
the vehicle to the set speed limit.
Turning on speed limiter
GUID-407B9770-D025-46F8-A1E6-B9F40D9E1 DE2
Push the speed limiter MAIN switch. The speed limiter
indicator (light) and the LIMIT indicators illuminate. The
set speed indicator shows “- - -”.
Setting speed limit
GUID-C925D9B5-EDE5-41B2-83B9-C278ED3FDECF
1. Push the SET/− switch.
.
When the vehicle is stopped, the speed will be
set at 30 km/h or 20 MPH.
.
While driving, the speed limit will be set at the
current speed.
2. When the speed limit is set, the SET (indicator
light) and the set speed indicators illuminate on
the vehicle information display and instrument
panel (for Type B model).
Changing set speed limit:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Use either of the following operations to change the
speed limit.
. Push and hold the RES/+ or SET/− switch. The
set speed will increase or decrease by approxi-
mately 10 km/h or 10 MPH.
. Push, then quickly release the RES/+ or SET/−
switch. Each time you do this, the set speed will
increase or decrease by approximately 1 km/h or 1
MPH.
Resuming preset speed limit:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the RES/+ switch. The SET indicator (light)
illuminates, and the speed limiter will resume the last
set speed limit. If the vehicle is driven at a speed over
the last set speed limit, the set speed indicator will
blink.
Canceling speed limit
GUID-F503ED75-E45E-411A-BCD7-E621DB8FF464
To cancel the speed limiter, push the CANCEL switch.
The SET indicator (light) will turn off. (The set speed
indicator will remain on the display.)
If the accelerator pedal is fully depressed (beyond the
resistance point), the speed limiter is temporarily
suspended and the vehicle speed may be controlled
above the set speed. (For Co ntin uous ly Variab le
Transmission model: The transmission may downshift
into a lower gear). The SET indicator (light) will remain
on the instrument panel (for Type B model) or vehicle
information display (for Type C model).
If the accelerator pedal returns to the resistance point
and the vehicle speed returns to the set speed, the
speed limiter will activate and limit vehicle speed.
When one of the following operations is performed, the
speed limiter will be canceled. The speed limiter
indicator light, and the SET indicator (light) and the
LIMIT indicator will turn off. These canceling methods
will erase the set speed limit memory.
. Push the speed limiter MAIN switch.
. Push the cruise control MAIN switch.
Starting and driving 5-29

Related Topics

Popular Owner Manuals