5-24 Starting and driving
stopping during the same journey.
. Whenever the Stop/Start System is disengaged
the indicator light on the Stop/Start System OFF
switch illuminates. In this condition the Stop/Start
System cannot prevent unnecessary fuel con-
sumption, exhaust emissions, or noise during your
journey.
NOTE:
The following messages may be displayed for a
few seconds in the vehicle information display
when the Stop/Start System OFF switch is
pressed.
More information about the Stop/Start System can be
checked using the [Settings] menu. (About the display,
see “Vehicle information display” (P.2-20).)
WARNING:
. The VDC system is designed to help improve
driving stability but does not prevent acci-
dents due to abrupt steering operation at
high speeds or due to careless or dangerous
driving techniques. Reduce vehicle speed
and be especially careful when driving and
cornering on slippery surfaces and always
drive carefully.
. Do not modify the vehicle’s suspension. If
suspension parts such as shock absorbers,
struts, springs, stabilizer bars, bushings and
wheels are not NISSAN-a pproved or are
extr emely deteri orated, the VDC system
may not operate properly. This could ad-
versely affect vehicle handling performance,
and the “VDC OFF” indicator or “SLIP”
indicator or both indicator lights may illumi-
nate.
. If brake related parts such as brake pads,
rotors and calipers are not standard equip-
ment or are e xtremely deterior ated, the
“VDC OFF” indicator or “SLIP” indicator or
both indicator lights may illuminate.
. If engine related parts such as a muffler are
not standard equipment or are extremely
deteriorated, the “VDC OFF” indicator or
“SLIP” indic ato r or both indicator lights
may illuminate.
. When driving on extremely inclined surfaces
such as higher banked corners, the VDC
system may not operate properly and the
“VDC OFF” indicator or “SLIP” indicator or
both indicator lights may illuminate. Do not
drive on these types of roads.
. When driving on unstable surfaces such as a
turntable, ferry, elevator or ramp, the “VDC
OFF” indicator or “SLIP” indicator or both
indicator lights may illuminate. This is not a
malfunction. Restart the engine after driving
onto a stable surface.
. If wheels or tires other than those recom-
mended are used, the VDC system may not
operate properly and “VDC OFF” indicator or
“SLIP” indicator or both indicator lights may
illuminate.
. The VDC system is not a substitute for winter
tires or tire chains on a snowcovered road.
When accelerating or driving on slippery surfaces, the
tires may spin or slide. With the Vehicle Dynamic
Control (VDC) system, sensors detect these move-
ments and control the braking and engine output to
help improve vehicle stability.
. When the VDC system is operating, the “SLIP”
indicator in the instrument panel blinks.
. If the “SLIP” indicator blinks, the road conditions
are slippery. Be sure to adjust your speed and
driving to these conditions. Be sure to drive
carefully. (See “Slip indicator light (if equipped
except for Australia and New Zealand)” (P.2-17)
and “Vehicle Dynamic Control (VDC) off indicator
light” (P.2-18).)
. Indicator light
If a malfunction occurs in the system, the “SLIP”
and “VDC OFF” indicator lights illuminate in the
instrument panel. As long as these indicators are
illuminated, the VDC system function is canceled.
The VDC system uses a Brake Limited Slip Differential
(BLSD) function to improve vehicle traction. The BLSD
system works when one of the driving wheels is
spinning on a slippery surface. The BLSD system
VEHICLE DYNAMIC CONTROL (VDC)
SYSTEM (if equipped except for
Europe, Australia and New Zealand)