2007-2012 Nissan X Trail SUV Starting and driving User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Starting and driving for Your Nissan X Trail SUV Second Generation (2007-2012)

(257,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5 Starting and driving
Break-in schedule
....
.................................................................................... 5-3
Before starting engine
....
............................................................................ 5-3
Precautions when starting and driving
....
............................................... 5-3
Exhaust gas (carbon monoxide)
....
.................................................... 5-4
Three-way catalyst (if equipped)
....
.................................................. 5-4
Tire Pressure Monitoring System (TPMS) (if equipped)
....
........ 5-4
Diesel Particulate Filter (DPF) (if equipped)
....
.............................. 5-6
On-pavement and off-road driving precautions
....
............................... 5-7
Care when driving
....
................................................................................... 5-7
Engine cold start period
....
.................................................................. 5-7
Loading luggage
....
............................................................................... 5-7
Driving in wet conditions
....
................................................................ 5-7
Driving in winter conditions
....
............................................................ 5-7
Ignition switch (model without intelligent Key system)
....
.................. 5-7
Continuously Variable Transmission (CVT)
....
................................ 5-7
Manual Transmission (MT)
....
.............................................................. 5-8
Steering lock (if equipped)
....
............................................................. 5-8
Key positions
....
...................................................................................... 5-8
Push-button ignition switch (model with Intelligent
Key system)
....
............................................................................................... 5-9
Precautions on push-button ignition switch operation
....
........... 5-9
Intelligent Key system
....
...................................................................... 5-9
Steering lock (if equipped)
....
.......................................................... 5-10
Ignition switch positions
....
............................................................... 5-10
Intelligent Key battery discharge
....
................................................ 5-11
Starting engine (model without Intelligent Key system)
....
............. 5-11
Starting engine (model with Intelligent Key system)
....
................... 5-12
Driving vehicle
....
....................................................................................... 5-13
Driving with Continuously Variable Transmission (CVT)
....
...... 5-13
Driving with Manual Transmission (MT)
....
................................... 5-17
Gear Shift Indicator (if equipped)
....
............................................. 5-18
Stop/Start System or Idling Stop System (if equipped)
....
........... 5-18
Stop/Start System or Idling Stop System display
....
.............. 5-20
Stop/Start or Idling Stop OFF switch
....
.................................... 5-21
Four-Wheel Drive (4WD) (if equipped)
....
......................................... 5-22
Four-Wheel Drive (4WD) mode switch operations
....
........... 5-22
4WD warning
....
............................................................................... 5-24
4WD mode indicator lights
....
....................................................... 5-24
Four-Wheel Drive (4WD) torque distribution indicator
....
..... 5-25
Off-road driving safety precautions
....
........................................ 5-25
Tires of 4WD model
....
................................................................... 5-26
Vehicle Dynamic Control (VDC)/Electronic Stability Program
(ESP) system
....
........................................................................................ 5-26
Vehicle Dynamic Control (VDC)/Electronic Stability
Program (ESP) system OFF switch
....
....................................... 5-27
Chassis control
....
.................................................................................... 5-28
Active Trace Control
....
................................................................... 5-28
Active Engine Brake (Continuously Variable Transmission
(CVT) models)
....
.............................................................................. 5-28
Active Ride Control
....
..................................................................... 5-29
Hill Start Assist system
....
...................................................................... 5-30
Hill descent control system (if equipped)
....
..................................... 5-30
Hill descent control switch
....
....................................................... 5-31
Blind Spot Warning (BSW)/Lane Departure Warning (LDW)
systems (if equipped)
....
......................................................................... 5-31
BSW system operation
....
.............................................................. 5-32
BSW driving situations
....
.............................................................. 5-33
LDW system operation
....
.............................................................. 5-34
BSW/LDW temporary disabled status
....
.................................. 5-35
BSW/LDW automatic deactivation
....
......................................... 5-35
BSW/LDW malfunction
....
............................................................. 5-35
Camera unit maintenance
....
.......................................................... 5-35
Condition: 'Except for China'/
(258,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Blind Spot Warning (BSW) system (if equipped for Europe)
....
.... 5-36
BSW system operation
....
................................................................ 5-36
BSW driving situations
....
................................................................. 5-38
BSW temporary disabled status
....
................................................ 5-39
BSW automatic deactivation
....
...................................................... 5-39
BSW malfunction
....
........................................................................... 5-39
Camera unit maintenance
....
............................................................ 5-39
Lane Departure Warning (LDW) system (if equipped
for Europe)
....
............................................................................................. 5-39
LDW system operation
....
................................................................. 5-40
Temporary disabled status at high temperature
....
..................... 5-41
Multi-sensing camera unit maintenance
....
................................... 5-41
Speed limiter (if equipped)
....
................................................................ 5-41
Speed limiter operations
....
.............................................................. 5-41
Cruise control (if equipped)
....
.............................................................. 5-43
Precautions on cruise control
....
..................................................... 5-43
Cruise control operations
....
............................................................ 5-44
Forward emergency braking system (if equipped)
....
...................... 5-45
System operation
....
........................................................................... 5-45
ECO mode system (if equipped)
....
..................................................... 5-47
ECO Pedal Guide function
....
......................................................... 5-47
Ambient ECO
....
.................................................................................. 5-47
ECO Drive Report
....
......................................................................... 5-48
Parking
....
..................................................................................................... 5-48
Parking sensor (sonar) system (if equipped)
....
................................ 5-50
Parking sensor (sonar) system OFF switch (if equipped)
....
.... 5-51
Parking sensor (sonar) system setting
....
..................................... 5-52
Trailer towing (except for Australia, New Zealand, South Africa
and Europe)
....
.......................................................................................... 5-52
Trailer towing (for Australia, New Zealand, South Africa
and Europe)
....
.......................................................................................... 5-52
Operating precautions
....
............................................................... 5-52
Maximum load limits (for Australia and New Zealand)
....
...... 5-53
Tire pressure
....
................................................................................. 5-55
Safety chains
....
................................................................................ 5-55
Trailer brakes
....
................................................................................ 5-55
Trailer detection (if equipped)
....
.................................................. 5-55
Coupling device installation (for Europe)
....
.............................. 5-56
Electric power steering system
....
........................................................ 5-56
Brake system
....
........................................................................................ 5-57
Brake precautions
....
....................................................................... 5-57
Brake assist
....
.................................................................................. 5-58
Anti-lock Braking System (ABS)
....
............................................. 5-58
Vehicle security
....
..................................................................................... 5-59
Cold weather driving
....
........................................................................... 5-59
Battery
....
............................................................................................ 5-59
Engine coolant
....
............................................................................. 5-59
Tire equipment
....
............................................................................. 5-59
Special winter equipment
....
.......................................................... 5-60
Parking brake
....
................................................................................ 5-60
Corrosion protection
....
................................................................... 5-60
Condition: 'Except for China'/
(259,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
T32A130827-0AC29463-3C0B-4206-B92B-13B6E4EF1077
During the first 1,600 km (1,000 miles), follow these
recommendations to obtain maximum engine perfor-
mance and ensure the future reliability and economy of
your new vehicle. Failure to follow these recommenda-
tions may result in shortened engine life and reduced
engine performance.
. Do not drive at a constant speed, either fast or
slow, for long periods of time.
. Do not run the engine over 4,000 rpm (fo r
gasoline engine models).
. Do not accelerate at full throttle in any gear.
. Do not start quickly.
. Do not brake hard as much as possible.
. Do not tow a trailer for at least the first 800 km
(500 miles) (for Australia, New Zealand, South
Africa and Europe).
T32A130827-090F95DC-E091-4394-8A6C-A8CC493B8141
WARNING:
The driving characteristics of your vehicle will
change remarkably by any additional load and
its distribution, as well as by adding optional
equipment (trailer coupling, roof racks, etc.).
Your driving style and speed must be adjusted
according to the circumstances. Especially when
carrying heavy loads, your speed must be
reduced adequately.
. Make sure the area around the vehicle is clear.
. Visually inspect tires for their appearance and
condition. Measure and check the tire pressure for
proper inflation.
. Check that all windows and lights are clean.
. Adjust the seat and head restraint positions.
. Adjust the inside and outside rearview mirror
positions.
. Fasten your seat belt and ask all passengers to do
the same.
. Check that all doors are closed.
. Check the operation of the warning lights when
the ignition switch is placed in the “ON” position.
. Maintenance items in the “8. Maintenance and do-
it-yourself” section should be checked periodi-
cally.
T32A130827-EDC4EF8C-D00C-4C82-AB1C-DA53C86C7DED
WARNING:
. Never leave children or adults who would
normally require the support of others alone
in your vehicle. Pets should not be left alone
either. Th ey could unknowingly activate
switches or controls and inadvertently be-
come involved in a serious accident and
injure themselves. On hot, sunny days,
temperatures in a closed vehicle could
quickly become high enough to cause se-
vere or possibly fatal illness to people or
animals.
. Properly secure all luggage to help prevent it
from sliding or shifting. Do not place lug-
gage higher than the seatbacks. In a sudden
stop or collision, unsecured luggage could
cause personal injury.
NOTE:
During the first few months after purchasing a
new vehicle, if you smell strong odors of Volatile
Organic Compounds (VOCs) inside the vehicle,
ventilat e the passenger compartmen t thor-
oughly. Open all the windows before entering
or while in the vehicle. In addition, when the
temperature in th e passenger compartment
rises, or when the vehicle is parked in direct
sunlight for a period of time, turn off the air
recirculation mode of the air conditioner and/or
open the windows to allow sufficient fresh air
into the passenger compartment.
Starting and driving 5-3
BREAK-IN SCHEDULE BEFORE STARTING ENGINE
PRECAUTIONS WHEN STARTING
AND DRIVING
Condition: 'Except for China'/
(260,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-4 Starting and driving
EXHAUST GAS (carbon monoxide)
T32A130827-A70640B2-660A-40EC-AACA-9AE673CECA70
WARNING:
. Do not breathe exhaust gas; i t contains
colorless and odorless carbon monoxide.
Carbon monoxide is dangerous. It can cause
unconsciousness or death.
. If you suspect that exhaust fumes are
entering the vehicle, drive with all windows
fully open, and have the vehicle inspected
immediately.
. Do not run the engine in closed spaces such
as a garage.
. Do not park the vehicle with the engine
running for an extended period of time.
. Keep the back door closed while driving,
otherwise exhaust gas could be drawn into
the passenger compartment. If you must
drive with the back door open, follow these
precautions:
— Open all the windows.
— Turn the air recirculation mode off and
set the fan speed control to the highest
level to circulate the air.
. If electrical wiring or other cable connec-
tions must pass to a trailer through the seal
of the back door or the body, follow the
manufacturer’s recommendation to prevent
carbon monoxide entry into the vehicle.
. If a special body or ot her equ ipment is
added for recreational or other usage, follow
the manufacturer’s recommendation to pre-
vent carbon monoxide entry into the vehicle.
(Some recreational vehicle appliances such
as stoves, refrigerators, heaters, etc . may
also generate carbon monoxide.)
. The exhaust system and body should be
inspected by a qualified mechanic whenever:
— Your vehicle is raised while being ser-
viced.
— You suspect th at exhaust fume s are
entering into the passenger compart-
ment.
— You notice a change in the sound of the
exhaust system.
— You hav e had an accident involving
damage to the exhaust system, under-
body, or rear of the vehicle.
THREE-WAY CATALYST (if equipped)
T32A130827-E3FB65A9-B2E7-4DF0-9305-1A61B5242E01
WARNING:
. The exhaust gas and the exhaust system are
very hot. Keep people, animals and flam-
mable ma terials away from the exhaust
system components.
. Do not stop or park the vehicle over
flammable material s such as dry grass,
wastepaper or rags. They may ignite and
cause a fire.
The three-way catalyst is an emission control device
installed in the exhaust system. Exhaust gas in the
three-way catalyst is burned at high temperatures to
help reduce pollutants.
CAUTION:
. Do not use leaded gasoline. (See “Recom-
mended Fluids/lubricants and capacities”
(P.9-2).) Deposits from leaded gasoline ser-
iously reduce the ability of the three-way
catalyst to help reduce exhaust pollutants
and/or damage the three-way catalyst.
. Keep your engine tuned up. Malfunctions in
the ignition, fuel injection, or electrical
systems may cause overrich fuel to flow into
the three-way catalyst, causing it to over-
heat. Do not keep driving if the engine
misfires, or if noticeable loss of performance
or other unusual operating conditions are
detected. Have the vehicle inspected
promptly by a NISSAN dealer.
. Avoid driving with an extremely low fuel
level. Running out of fuel could cause the
engine to misfire, damaging the three-way
catalyst.
. Do not race the engine while warming it up.
. Do not push or tow your vehicle to start the
engine.
TIRE PRESSURE MONITORING SYSTEM
(TPMS) (if equipped)
GUID-B1F2EA48-8821-41F0-BDC2-29C23573CEE3
Each tire, including the spare (if provided), should be
checked monthly when cold and inflated to the inflation
pressure recommended by the vehicle manufacturer
on the vehicle placard or tire inflation pressure label. (If
your vehicle has tires of a different size than the size
indicated on the veh icle placard or tire inflation
pressure label, you should determine the proper tire
inflation pressure for those tires.)
As an added safety feature, your vehicle has been
equipped with a Tire Pressure Monitoring System
(TPMS) that illuminates a low tire pressure telltale
when one or more of your tires is significantly under-
inflated. Accordingly, when the low tire pressure telltale
illuminates, you should stop and check your tires as
Condition: 'Except for China'/
(261,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
soon as possible, and inflate them to the proper
pressure. Driving on a significantly under-inflated tire
causes the tire to overheat and can lead to tire failure.
Under-inflation also reduces fuel efficiency and tire
tread life, and may affect the vehicle’s handling and
stopping ability.
Please note that the TPMS is not a substitute for
proper tire maintenance, and it is the driver’s respon-
sibility to maintain correct tire pressure, even if under-
inflation has not reached the level to trigger illumination
of the TPMS low tire pressure telltale.
Your vehicle has also been equipped with a TPMS
malfunction indicator to indicate when the system is
not operating properly. The TPMS malfunction indica-
tor is combined with the low tire pressure telltale.
When the system detects a malfunction, the telltale will
flash for approximately one minute and then remain
continuously illuminated. This sequence will continue
upon subsequent vehicle start-ups as long as the
malfunction exists. When the malfunction indicator is
illuminated, the system may not be able to detect or
signal low tire pressure as intended. TPMS malfunc-
tions may occur for a variety of reasons, including the
installation of replacement or alternate tires or wheels
on the vehicle that prevent the TPMS from functioning
properly. Always check the TPMS malfunction telltale
after replacing one or more tires or wheels on your
vehicle to ensure that the replacement or alternate tires
and wheels allow the TPMS to continue to function
properly.
Additional information
GUID-2100EB5C-6E9C-4DF0-9BA3-E30F03EA4592
. The TPMS does not monitor the tire pressure of
the spare tire.
. The TPMS will activate only when the vehicle is
driven at speeds above 25 km/h (16 MPH). Also,
this system may not detect a sudden drop in tire
pressure (for example a flat tire while driving).
. The low tire pressure warning light may not
automatically turn off when the tire pressure is
adjusted. After the tire is inflated to the recom-
mended pressure, reset the tire pressures regis-
tered in your vehicle and then drive the vehicle at
speeds above 25 km/h (16 MPH) to activate the
TPMS and turn off the low tire pressure warning
light.
. Depending on a change in the outside tempera-
ture, the low tire pressure warning light may
illuminate even if the tire pressur e has been
adjusted properly. Adjust the tire pressure to the
recommended COLD tire pressure again when
the tires are cold, and reset the TPMS.
. You can check the pressure of all tires in the
vehicle information display. (See “Trip computer”
(P.2-34).)
For additional information, see “Low tire pressure
warning light” (P.2-14).
WARNING:
. If the low tire pressure warning light illumi-
nates while driving, avoid sudden steering
maneuvers or abrupt braking, reduce vehicle
speed, pull off the road to a safe location
and stop the vehicle as soon as possible.
Driving with under-inflated tires may perma-
nently damage the tires and increase the
likelihood of tire failure. Serious vehicle
damage could occur and may lead to an
accident and could result in serious personal
injury. Check the tire pressure for all four
tires. Adjust the tire pressure to the recom-
mended COLD tire pressure shown on the
tire placard to turn the low tire pressure
warning light off. If the light still illuminates
while driving after adjusting the tire pres-
sure, a tire may be flat. If you have a flat tire,
replace it with a spare tire as soon as
possible. (See “Flat tire” (P.6-2) for changing
a flat tire.)
. After adjusting the tire pressure, be sure to
reset the TPMS. Otherwise, the TPMS will
not warn of low tire pressure.
. When a spare tire is mounted or a wheel is
replaced, the TPMS will not function and the
low tire pressure warning light will flash for
approximately 1 minute. The light will re-
main on after the 1 m inute. Contact a
NISSAN dealer as soon as possible for tire
replacement and/or system resetting.
. Replac ing tires with those not originally
specified by NISSAN could affect the proper
operation of the TPMS.
. Do not inject any tire liquid or aerosol tire
sealant into the tires, as this may cause a
malfunction of the tire pressure sensors.
CAUTION:
. The TPMS may not function properly when
the wheels are equipped with tire chains or
the wheels are buried in snow.
. Do not place metalized film or any metal
parts (antenna, etc.) on the windows. This
may cause poor reception of the signals
Starting and driving 5-5
Condition: 'Except for China'/
(262,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-6 Starting and driving
from th e tire pr essure sensors, an d the
TPMS will not function properly.
Some devices and transmitters may temporarily inter-
fere with the operation of the TPMS and cause the low
tire pressure warning light to illuminate. Some exam-
ples are:
. Facilities or electric devices using similar radio
frequencies are near the vehicle.
. If a transmitter set to similar frequencies is being
used in or near the vehicle.
. If a computer (or similar equipment) or a DC/AC
converter is being used in or near the vehicle.
FCC Notice:
For USA:
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harm-
ful interference, and (2) this device must accept
any interference received, including interference
that may cause undesired operation.
Note: Changes or modifications not expressly
approved by the party responsible for compli-
ance could void the user’s authority to operate
the equipment.
For Canada:
This dev ice complies with Industry Ca nada
licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this
device may not cause interference, and (2) this
device must accept any interference, including
interference that may cause undesired operation
of the device.
TPMS resetting
GUID-F76622F1-0B98-4141-BFE3-22038209B548
To keep the TPMS functioning properly, the reset
operation must be performed in the following cases.
. when the tire pressure is adjusted
. when a tire or a wheel is replaced
. when the tires are rotated
Perform the following procedures to reset the TPMS.
1. Park the vehicle in a safe and level place.
2. Apply the parking brake and place the shift lever in
the “P” (Park) position.
3. Adjust the tire pressure on all four tires to the
recommended COLD tire pressure shown on the
tire placard. Use a tire pressure gauge to check
the tire pressure.
4. Place the ignition switch in the “ON” position.
JVS0434X
Steering-wheel-mounted controls (left side)
5. Use the
switch
*
1
until “Settings” appears,
and press ENTER
*
1
.
6. Use the
switch
*
1
until “Tire Pressures” is
selected, and press ENTER
*
1
.
7. Use the
switch
*
1
until “Calibrate” is
selected, and press ENTER
*
1
.
8. Use the
switch
*
1
until “Start” is selected,
and press ENTER
*
1
to reset the TPMS. When
the TPMS resetting starts, the message “TPMS
resetting” will be displayed.
9. After resetting the TPMS, drive the vehicle for
several minutes at speeds above 25 km/h (16
MPH).
If the low tire pressure warning light illuminates after
the resetting operation, it may indicate that the TPMS
is not functioning properly. Have the system checked
by a NISSAN dealer.
For information regarding the low tire pressure warning
light, see “Low tire pressure warning light” (P.2-14).
DIESEL PARTICULATE FILTER (DPF) (if
equipped)
GUID-5A9CD1A0-AAA1-48F8-8DC8-EB7CA86C2ADF
WARNING:
. Be careful not to burn yourself with exhaust
gases.
. Do not park the vehicle over flammable
materials such as dry grass, waste paper or
rags, as they may burn easily.
. Use the specified engine oil for Diesel
Particulate Filter (DPF) equipped models.
For details, see “Recommended Fluids/lu-
bricants and capacities” (P.9-2).
CAUTION:
The DPF becomes extremely hot after burning
particulate matter.
Condition: 'Except for China'/
(263,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
T32A130827-E3568FA0-1FCD-4E0B-9D9A-62C1D62A8525
Utility vehicles have a significantly higher roll-
over rate than other types of vehicles.
They have higher ground clearance than passenger
cars to make them capable of performing in a wide
variety of on-pavement and off-road applications. This
gives them a higher center of gravity than ordinary cars.
An advantage of higher ground clearance is a better
view of the road, allowing you to anticipate problems.
However, they are not designed for cornering at the
same speeds as conventional passenger cars any
more than low-slung sports cars are designed to
perform satisfactorily under off-road conditions. If at all
possible, avoid sharp turns or abrupt maneuvers ,
particularly at high speeds. As with other vehicles of
this type, failure to operate this vehicle correctly may
result in loss of control or vehicle rollover.
CAUTION:
. Do not drive on dry hard surface roads in
LOCK mode.
. Driving on dry hard surface roads in LOCK
mode may cause unnecessary noise and tire
wear. NISSAN recommends driving in the
2WD or AUTO mode under these conditions.
(Four-Wheel Drive (4WD) model)
See “Four-Wheel Drive (4WD)” (P.5-22) for more
details.
T32A130827-FAEDCC51-03A5-46E8-A1B4-05F8A0ACFCB0
Driving your vehicle to fit the circumstances is essential
for your safety and comfort. As a driver, you should be
the one who knows best how to drive in the given
circumstances.
ENGINE COLD START PERIOD
T32A130827-423ABF28-182C-4532-8735-2CF508C400B5
Due to the higher engine speeds, when the engine is
cold, extra caution must be exercised when selecting a
gear during the engine warm-up period after starting
the engine.
LOADING LUGGAGE
T32A130827-F90D098F-7D0F-487B-AF46-661F74A575F1
Loads and their distribution and the attachment of
equipment (coupling devices, roof luggage carriers,
etc.) will considerably change the driving character-
istics of the vehicle. Your driving style and speed must
be adjusted according to the circumstances.
DRIVING IN WET CONDITIONS
T32A130827-9C65E705-D46A-4F87-85ED-94B9DB9A0814
. Avoid accelerating or stopping suddenly.
. Avoid sharp turning or lane changing suddenly.
. Avoid following too close to the vehicle in front.
When water covers the road surface with water
puddles, small water streams, etc., reduce speed to
prevent hydroplaning which can cause skidding and
loss of control. Worn tires will increase this risk.
DRIVING IN WINTER CONDITIONS
T32A130827-707A43BC-7022-449E-80CD-602716C03D25
. Drive cautiously.
. Avoid accelerating or stopping suddenly.
. Avoid sharp turning or lane changing suddenly.
. Avoid sudden steering.
. Avoid following too close to the vehicle in front.
T32A130827-CBF49A8A-33E0-4B19-A0C4-B073BA66DCFD
WARNING:
Never remove the key or place the i gnition
switch in the “LOCK” position while driving. The
steering wheel will lock and could cause the
driver to lose control of the vehicle. This could
result in serious vehicle damage or personal
injury.
CONTINUOUSLY VARIABLE TRANSMIS-
SION (CVT)
GUID-605E0183-46DA-4BF9-90EB-D63F97C8E225
JVS0409X
The ignition lock is designed so that the ignition switch
cannot be turned to the “LOCK” position until the shift
lever is moved to the “P” (Park) position. When moving
the ignition switch to the “LOCK” position, to remove
the key from the ignition switch, make sure the shift
lever is in the “P” (Park) position.
When the ignition switch cannot be turned to the
“LOCK” position:
1. Move the shift lever to the “P” (Park) position.
2. Turn the ignition switch slightly in the “ON”
direction.
Starting and driving 5-7
ON-PAVEMENT AND OFF-ROAD
DRIVING PRECAUTIONS
CARE WHEN DRIVING
IGNITION SWITCH (model without
intelligent Key system)
Condition: 'Except for China'/
(264,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-8 Starting and driving
3. Place the ignition switch in the “LOCK” position.
4. Remove the key.
If the ignition switch is turned to the “LOCK” position,
the shift lever cannot be moved from the “P” (Park)
position. The shift lever can be moved if the ignition
switch is in the “ON” position with the foot brake pedal
depressed.
The “OFF” position
*
1
is between the “LOCK” and
“ON” positions, although it is not marked on the
ignition switch.
MANUAL TRANSMISSION (MT)
T32A130827-AC9B641D-BD35-4AF4-83C0-7458C9A972F2
JVS0409X
The ignition switch includes a device that helps
prevent accidental removal of the key while driving.
The key can only be removed when the ignition switch
is in the “LOCK” position.
1. Turn the ignition switch slightly in the “ON”
direction.
2. Place the ignition switch in the “LOCK” position.
3. Remove the key.
The “OFF” position
*
1
is between the “LOCK” and
“ON” positions, although it is not marked on the
ignition switch.
STEERING LOCK (if equipped)
T32A130827-034768C7-0064-4614-AD37-6617B6EE9A7F
To lock steering wheel
T32A130827-96BC4746-D027-4F2F-BE51-24E0F70F7D7C
1. Place the ignition switch in the “LOCK” position.
2. Remove the key, if it is inserted in the ignition
switch.
3. Turn the steering wheel 1/6 of a turn clockwise
from the straight up position.
To unlock steering wheel
T32A130827-238448DA-E61D-4230-BDC4-765C7822D857
1. Insert the key into the ignition switch.
2. Gently turn the ignition switch while rotating the
steering wheel slightly right and left.
KEY POSITIONS
T32A130827-517E0B80-0FCC-4E32-84E7-A02026650916
LOCK (OFF)/LOCK (ACC) (0)
T32A130827-1EECA44F-6B9C-469F-AD46-08410CAFDB59
. The ignition key can only be removed at this
position.
. The steering lock (if equipped) can only be locked
at this position.
. The electrical accessory power activates without
the engine turned on. (ACC position)
OFF/OFF(ACC) (1)
T32A130827-E0306A2A-B0CE-4142-9178-4DC58906EEE1
. The engine is turned off with the steering wheel
unlocked.
. The electrical accessory power activates without
the engine turned on. (ACC position)
ON (2)
T32A130827-99608CE7-C1A4-419A-AB31-5DED98FA480D
The ignition system and the electrical accessory power
activate without the engine turned on.
START (3)
T32A130827-DC8716CC-7528-494E-8851-5E7C1C8FB7AB
The engine starter activates and the engine will start.
The ignition switch, when released, will automatically
turn to the “ON” position.
CAUTION:
As soon as the engine has started, release the
ignition switch immediately.
Condition: 'Except for China'/
(265,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
GUID-A4676F80-7282-4B00-8821-9F149B55F8EE
PRECAUTIONS ON PUSH-BUTTON IGNI-
TION SWITCH OPERATION
GUID-086E9D42-2B55-4695-AC49-967549 4A70E1
WARNING:
Do not operate the push-button ignition switch
while driving the vehicle except in an emergency.
(The engine will stop when the ignition switch is
pushed 3 consecutive times or th e ignition
switch is pushed and held for more than 2
seconds.) The steering wheel will lock and could
cause the driver to lose control of the vehicle.
This could result in serious vehicle damage or
personal injury.
Before operating the push-button ignition switch, be
sure to move the shift lever to the “P” (Park) position
(for Continuously Variable Transmission model) or the
shift lever to the “N” (Neutral) position (for Manual
Transmission model).
INTELLIGENT KEY SYSTEM
GUID-11621F56-5195-4DE6-92E0-5AFEC5B4DC1F
The Intelligent Key system can operate the ignition
switch without taking the key out from your pocket or
bag. The operating environment and/or conditions may
affect the Intelligent Key system operation. Some
indicators and warnings for operation are displayed
on the vehicle information display and/or in the meter.
(See “Vehicle infor mation display” (P.2-20) and
“Warning/indicator lights and audible reminders”
(P.2-12).)
CAUTION:
. Be sure to carry the Intelligent Key with you
when operating the vehicle.
. Never leave the Intelligent Key inside the
vehicle when you leave the vehicle.
. If the vehicle battery is discharged, the
ignitio n swi tch cannot be switche d from
the “LOCK” position, and if the steering lock
is engaged, the steering wheel cannot be
moved. Charge the battery as soon as
possible. (See “Jump starting” (P.6-8).)
Operating range
GUID-6DCA9273-95BE-404D-9DED-C3ABB1547B7E
SSD0436
The Intelligent Key can only be used for starting the
engine when the Intelligent Key is within the specified
operating range
*
1
.
When the Intelligent Key battery is almost discharged
or strong radio waves are present near the operating
location, the Intelligent Key system’s operating range
becomes narrower and may not function properly.
If the Intelligent Key is within the operating range, it is
possible for anyone, even someone who does not carry
the Intelligent Key, to push the ignition switch to start
the engine.
. The luggage room area is not included in the
operating range, bu t the Intelligent Key may
function.
. If the Intelligent Key is placed on the instrument
panel, inside the glove box, door pocket or the
corner of the interior compartment, the Intelligent
Key may not function.
. If the Intelligent Key is placed near the door or
window outside the vehicle, the Intelligent Key
may function.
Continuously Variable Transmission (CVT)
model
GUID-4846178B-012D-41FF-8D9A-4B56BC7ED0EE
The ignition lock is designed so that the ignition switch
cannot be switched to the “LOCK” position until the
shift lever is moved to the “P” (Park) position.
When the ignition switch cannot be switched to the
“LOCK” position:
1. “Shift to Park” warning appears on the vehicle
information display and a chime sounds.
2. Move the shift lever to the “P” (Park) position.
3. Push the ignition switch. The ignition switch is
switched to the “OFF” position.
4. Open the door. The ignition switch turns to the
“LOCK” position.
For warnings and indicators on the vehicle information
display, see “Vehicle information display” (P.2-20).
If the ignition s w i t c h is switched to the “LOCK”
position, the shift lever cannot be moved from the “P”
(Park) position. The shift lever can be moved if the
ignition switch is in the “ON” position with the foot
brake pedal depressed.
Starting and driving 5-9
PUSH-BUTTON IGNITION SWITCH
(model with Intelligent Key system)
Condition: 'Except for China'/
(266,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-10 Starting and driving
STEERING LOCK (if equipped)
GUID-51E55D68-F23A-4B9F-922D-FB2A89F461A5
The ignition switch is equipped with an anti-theft
steering lock device.
To lock steering wheel
GUID-DAE59353-C43A-4135-85E1-2B9AABDD5C86
1. Place the ignition switch in the “OFF” position
where the ignition switch position indicator will not
illuminate.
2. Open or close the door. The ignition switch turns
to the “LOCK” position.
3. Turn the steering wheel 1/6 of a turn to the right or
left from the straight up position.
To unlock steering wheel
GUID-38F2C6E2-71BA-4EB6-AD76-1DA96CF7E0F3
Push the ignition switch, and the steering wheel will be
automatically unlocked.
CAUTION:
. If the battery of the vehicle is discharged, the
push-butt on ignitio n switch cannot be
switched from the “LOCK” position.
. If the steering lock release mal function
indicator appears on the vehicle information
display, push the ignition switch again while
rotating the steering wheel slightly to the
right and left.
(See “Vehicle information display” (P.2-20).)
IGNITION SWITCH POSITIONS
GUID-16FBF6ED-49B2-4CD6-9EF9-8B109D501B73
WARNING:
Never place the ignition switch in the “OFF”
position while driving. The steering wheel may
lock and cause the driver to lose control of the
vehicle, resulting in serious vehicle damage or
personal injury.
CAUTION:
. Do not leave the veh icle f or extended
periods of time when the ignition switch is
in the “ON” position and the engine is not
running. This can discharge the battery.
. Use electrical accessories with the engine
running to avoid discharging the vehicle
battery. If you must use accessories while
the engine is not running, do not use them
for extended periods of time and do not use
multiple electrical accessories at the same
time.
JVS0394X
When the ignition switch is pushed without depressing
the brake pedal (Continuously Variable Transmission
model) or the clutch pedal (Manua l Transmission
model), the ignition switch will illuminate.
Push the ignition switch center:
. once to change to “ON”.
. two times to change to “OFF”.
The ignition switch will automatically return to the
“LOCK” position when any door is either opened or
closed with the switch in the OFF position.
LOCK position
GUID-ED5510B6-7895-4E20-81E6-DE8C23CAA8BB
The ignition switch and steering lock (if equipped) can
only be locked at this position.
The ignition switch will lock when any door is opened
or closed with the ignition switched off.
ON position
GUID-1853F228-2702-4CE6-858C-9045EB728323
The ignition system and the electrical accessory power
activate at this position without the engine turned on.
The “ON” position has a battery saver feature that will
place the ignition switch in the “OFF” position, if the
vehicle is not running, after some time under the
following conditions:
. all doors are closed.
. shift lever is in “P” (Park) position (CVT model) or
“N” (Neutral) position (MT model).
The battery saver feature will be cancelled if any of the
following occur:
. any door is opened.
. shift lever is moved out of the “P” (Park) position.
. ignition switch changes position.
Condition: 'Except for China'/
(267,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
OFF position
GUID-DA2B9201-206A-406B-891F-59A88D312FBD
The engine is turned off in this position.
Auto ACC position
GUID-0E2947FE-3378-4474-91C2-392C40908C39
With the veh icl e in the “P” (Park) position, the
Intelligent Key with you and the ignition placed from
“ON” to “OFF”, the radio can still be used for a period
of time, or until the driver’s door is opened. After a
period of time, functions such as radio, navigation (if
equipped), and Bluetooth
®
Hands-Free Phone System
may be restarted by pressing the “POWER button/
VOLUME control knob” (See “Display screen, heater
and air conditioner, and audio system” (P.4-1) in this
manual) or the “UNLOCK” button on the Intelligent Key
up to a total of 30 minutes.
INTELLIGENT KEY BATTERY DISCHARGE
GUID-DDD49134-EED6-4344-B5AB-8DE3B2930F7E
JVS0404X
If the battery of the Intelligent Key is discharged, or
environmental conditions interfere with the Intelligent
Key operation, start the engine according to the
following procedure:
1. Continuously Variable Transmi ssi on (CVT)
model:
Move the shift lever to the “P” (Park) or “N”
(Neutral) position.
Manual Transmission (MT) model:
Move the shift lever to the “N” (Neutral) position.
2. Firmly depress the brake pedal.
3. Touch the ignition switch with the Intelligent Key
as illustrated. (A chime will sound.)
4. Push the ignition switch while depressing the
brake pedal (CVT model) or the clutch pedal (MT
model) within 10 seconds after the chime sounds.
The engine will start.
After step 3 is performed, when the ignition switch is
pushed without depressing the brake pedal (CVT
model) or the clutch pedal (MT model), the ignition
switch position will change to “ON”.
NOTE:
. When the ignition switch is placed in the
“ON” position or the engine is started by the
above procedures, the “Key battery low”
warning appears (on the Vehicle information
display) even if the Intelligent Key is inside
the vehicle. This is not a malfunction. To turn
off the warning, touch the ignition switch
with the Intelligent Key again.
. If the “Key battery low” warning appears (on
the Vehicle information display), replace the
battery as soon as possible. (See “Battery”
(P.8-20).)
GUID-4E257898-08E9-4BFE-8FAD-8C094EFB2296
1. Apply the parking brake.
2. Depress the foot brake pedal.
3. Move the shift lever to the “N” (Neutral) position,
and depress the clutch pedal to the floor while
starting the engine.
The starter is designed to not operate unless
the clutch pedal is depressed.
4. Crank the engine with your foot off the accelerator
pedal by turning the ignition switch in the “START”
position.
For diesel engine models: Wait until the glow
indicator light
goes out.
5. Immediately release the ignition switch when the
engine starts. If the engine starts, but fails to run,
repeat the above procedures.
If the engine is very hard to start in extremely cold
or hot weather, depress the accelerator pedal and
hold it to help start the engine.
CAUTION:
. Do not operate the starter for more than 15
seconds at a time. If the engine does not
start, place the ignition switch off and wait
10 seco nds before cranking the engine
again. Otherwise, the starter could be da-
maged.
. If it becomes necessary to start the engine
with a booster battery and jumper cables,
the instructions and cautions contained in
the “6. In case of emergency” section should
be carefully followed.
6. Allow the engine to idle for at least 30 seconds
after starting the engine to warm-up. Drive at
moderate speeds for a short distance first,
Starting and driving 5-11
STARTING ENGINE (model without
Intelligent Key system)
Condition: 'Except for China'/
(268,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-12 Starting and driving
especially in cold weather.
CAUTION:
Do not leave the vehicle unattended while the
engine is warming up.
GUID-85BD5A32-4CA0-4B20-A3F7-7F2F8C6EA88C
1. Apply the parking brake.
2. Continuously Variable Transmi ssi on (CVT)
model:
Move the shift lever to the “P” (Park) or the “N”
(Neutral) position.
The starter is designed to operate only when
the shift lever is in the proper position.
Manual Transmission (MT) model:
Move the shift lever to the “N” (Neutral) position.
The starter is designed to not operate unless
the clutch pedal is fully depressed.
The Intelligent Key must be carried when
operating the ignition switch.
3. Place the ignition switch in the “ON” position.
Depress the brake pedal (CVT model) or the
clutch pedal (MT model) and push the ignition
switch to start the engine.
For diesel engine models: Wait until the glow
indicator light
goes out.
To start the engine immediately, push and release
the ignition switch while depressing the brake
pedal or clutch pedal with the ignition switch in
any position.
4. Immediately release the ignition switch when the
engine starts. If the engine starts, but fails to run,
repeat the above procedures.
If the engine is very hard to start in extremely cold
or hot weather, depress the accelerator pedal and
hold it. Push the ignition switch for up to 15
seconds while holding. Release the accelerator
pedal when the engine starts.
CAUTION:
. As soon as the engine has started, release
the ignition switch immediately.
. Do not operate the starter for more than 15
seconds at a time. If the engine does not
start, place the ignition switch in the “OFF”
position and wait 10 seconds before crank-
ing the engine again. Otherwise, the starter
could be damaged.
. If it becomes necessary to start the engine
with a booster battery and jumper cables,
the instructions and cautions contained in
the “6. In case of emergency” section should
be carefully followed.
5. Allow the engine to idle for at least 30 seconds
after starting the engine to warm-up. Drive at
moderate speeds for a short distance first,
especially in cold weather.
CAUTION:
Do not leave the vehicle unattended while the
engine is warming up.
6. To stop the engine, move the shift lever to the “P”
(Park) position (CVT model) or move the shift lever
to the “N” (Neutral) position (MT model), apply the
parking brake and place the ignition switch in the
“OFF” position.
STARTING ENGINE (model with
Intelligent Key system)
Condition: 'Except for China'/
(269,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
T32A130827-5DFB93F9-CDD2-40A4-B4CA-7AD7192119CB
DRIVING WITH CONTINUOUSLY VARI-
ABLE TRANSMISSION (CVT)
T32A130827-F7C5BDAC-B708-41F7-9A32-F14C17BDCDAE
The Continuously Variable Transmission (CVT) in your
vehicle is electronically controlled to produce maximum
power and smooth operation.
The recommended operat ing procedures for this
transmission are shown on the following pages. Follow
these procedures for maximum vehicle performance
and driving enjoyment.
WARNING:
Do not downshift abruptly on slippery roads.
This may cause a loss of control.
CAUTION:
. The cold engine idle speed is high, so use
caution when shifting the transmission into
a forward or reverse position before the
engine has warmed up.
. Avoid revving u p the engine while the
vehicle is stopped. This could cause unex-
pected vehicle movement.
. Never shift to either the “P” (Park) or “R”
(Reverse) position while the vehicle is mov-
ing. This could cause serious damage to the
transmission.
. Start the engine in either the “P” (Park) or
“N” (Neutral) position. The engine will not
start in any other position. If it does, have
your vehicle checked by a NISSAN dealer.
. Except in an emergency, do not shift to the
“N” (Neutral) position while driving. Coast-
ing with the transmission in the “N” (Neutral)
position may cause serious damage to the
transmission.
. Shift into the “P” (Park) position and apply
the parking brake when at a standstill for
longer than a short waiting period.
. Keep the engine at idling speed wh ile
shifting from the “N” (Neutral) position to
any driving position.
. When stopping the vehicle on an uphill
grade, do not hold the vehicle by depressing
the accelerator pedal. The foot brake pedal
should be depressed in this situation.
Starting vehicle
T32A130827-E0E8CE2C-3F3F-496A-B326-0ED705AD3FCB
1. After starting the engine, fully depress the foot
brake pedal before moving the shift lever out of the
“P” (Park) position.
2. Keep the foot brake pedal depressed and move
the shift lever to a driving position.
3. Release the parking brake, the foot brake pedal,
and then gradually start the vehicle in motion.
The CVT is designed so the foot brake pedal
MUST be depressed before shifting from the “P”
(Park) position to any driving position while the
ignition switch is in the “ON” position.
The shift lever cannot be moved out of the “P”
(Park) p osition and into any of the other
positions if the ignition switch is placed in the
“LOCK”, “OFF” or “ACC” position.
CAUTION:
. DEPRESS THE FOOT BRAKE PEDAL - Shift-
ing the shift lever to “D”, “Ds”, “R”, “L” or
manual shift mode without depressing the
foot brake pedal causes the vehicle to move
slowly when the engine is running. Make
sure the foot brake pedal is depressed fully
and the vehicle is stopped before shifting
the shift lever.
. MAKE SURE OF THE SHIFT LEVER POSI-
TION - Make sure the shift lever is in the
desired position. “D”, “Ds”, “L” and manual
shift mode are used to move forward and
“R” to back up.
. WARM UP THE ENGINE - Due to the higher
idle speeds when the engine is cold, extra
caution must be exercised when shifting the
shift lever into the driving position immedi-
ately after starting the engine.
Shifting
GUID-66883E50-62DB-4D0A-AD0D-64E18A8E9465
JVS0391X
With manual shift mode (LHD model) (Type A)
Starting and driving 5-13
DRIVING VEHICLE
Condition: 'Except for China'/
(270,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-14 Starting and driving
JVS0441X
With manual shift mode (LHD model) (Type B)
SSD0727
Without manual shift mode (LHD model)
:
Push the button
*
A
while depressing the
foot brake pedal.
:
Push the button
*
A
.
:
Just move the shift lever.
WARNING:
. Apply the parking brake if the shift lever is in
any position while the engine is not running.
Failure to do so could cause the vehicle to
move unexpectedly or roll away and result in
serious personal injury or property damage.
. If the shift lever cannot be moved from the
“P” (Park) positio n while the engine is
running and the foot brake pedal is de-
pressed, the stop lights may not w or k.
Malfunctioning stop lights could cause an
accident injuring yourself and others.
After starting the engine, fully depress the foot brake
pedal, push the shift lever button and move the shift
lever out of the “P” (Park) position.
If the ignition switch is placed in the “OFF” or “ACC”
position for any reason while the shift lever is in any
positions other than the “P” (Park) position, the ignition
switch cannot be placed in the “LOCK” position.
If the ignition switch cannot be placed in the “LOCK”
position, perform the following steps:
1. Apply the parking brake.
2. Place the ignition switch in the “ON” position
while depressing the foot brake pedal.
3. Move the shift lever to the “P” (Park) position.
4. Place the ignition switch in the “LOCK” position.
P (Park):
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Use this position when the vehicle is parked or when
starting the engine. Make sure that the vehicle is
completely stopped and move the shift lever into
the “P” (Park) position. Apply the parking brake.
When parking on a hill, first depress the foot brake
pedal, apply the parking brake, and then move the shift
lever into the “P” (Park) position.
R (Reverse):
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Use this position to back up. Make sure that the vehicle
is completely stopped before selecting the “R”
(Reverse) position.
N (Neutral):
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Neither the forward nor reverse gear is engaged. The
engine can be started in this position. You may shift to
the “N” (Neutral) position and restart a stalled engine
while the vehicle is moving.
D (Drive):
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Use this position for all normal forward driving.
Ds (Drive Sport) (if equipped):
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
When the shift lever is shifted from the “D” (Drive) to
“Ds” (Drive Sport) position, the transmission enters the
Ds (Drive Sport) mode. Moving the shift lever to the
“Ds” (Drive Sport) position allows you to enjoy “sporty”
driving shift operation on a winding road and feel
smooth acceleration or deceleration on a hilly road by
moving in a lower gear automatically. Moving the shift
lever forwards and backwards allows manual shifting.
When canceling the Ds (Drive Sport) mode, return the
shift lever to the “D” (Drive) position. The transmission
returns to the normal driving mode.
L (Low) (if equipped):
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Use this position when climbing steep hills slowly or
driving slowly through deep snow, sand or mud, or for
maximum engine braking on steep downhill grades.
Manual shift mode
T32A130827-7DBE3DA8-E793-455A-A5EF-C0C301D4126A
When the shift lever is shifted from the “D” position to
the manual shift gate with the vehicle stopped or while
driving, the transmission enters the manual shift mode.
Shift ranges can be selected manually.
In the manual shift mode, the shift range is displayed
on the position indicator in the meter.
Shift ranges up or down one by one as follows:
Condition: 'Except for China'/
(271,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
M1
?
/
M2
?
/
M3
?
/
M4
?
/
M5
?
/
M6
?
/
M7
. When shifting up, move the shift lever to the +
(up) side. (Shifts to higher range.)
. When shifting down, move the shift lever to the −
(down) side. (Shifts to lower range.)
. Moving the shift lever to the same side twice will
shift the ranges in succession. However, if this
motion is rapidly done, the second shifting may not
be completed properly.
M7 (Seventh):
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Use this position for all norma l fo rward driving.
However, you need to shift down the gears manually
when accelerating or passing another vehicle.
M6 (Sixth) and M5 (Fifth):
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Use these positions when driving up long slopes, or for
engine braking when driving down long slopes.
M4 (Fourth), M3 (Third) and M2 (Second):
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Use these positions for hill climbing or engine braking
on downhill grades.
M1 (First):
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Use this position when climbing steep hills slowly or
driving slowly through deep snow, sand or mud or for
maximum engine braking on steep downhill grades.
. Remem ber not to driv e at high speeds for
extended periods of time in lower than M7 range.
This reduces fuel economy.
. In the manual shift mode, the transmission
automatical ly shifts down t o M1 (First)
before the vehicle comes to a stop. When
accelerating again, it is necessary to shift up
to the desired range.
. In the manual shift mode, the transmission
may not shift to the selected gear. This helps
maintain driving performance and reduces
the chance of vehicle damage or loss of
control.
. When canceling the manual shift mode, return the
shift lever to the “D” position. The transmission
returns to the normal driving mode.
. When the CVT fluid temperature is extremely low,
the manual shift mode may not work and
automatically shift as a drive mode. This is not a
malfunction. In this case, return the shift lever to
the “D” position and drive for a while and then shift
to the manual shift mode.
. When the CVT fluid temperature is high, the shift
range may upshift in lower rpm than usual. This is
not a malfunction.
SPORT mode switch (if equipped)
GUID-77438257-E1FF-4E69-99E9-6666774EFF45
JVS0208X
To select the SPORT mode, push the SPORT mode
switch with the shift lever in the “D” (Drive) position.
The SPORT mode indicator light
in the meter
panel illuminates. To turn off the SPORT mode, push
the SPORT mode switch again. The SPORT mode
indicator light will turn off. When the shift lever is
shifted to any position other than “D” or “Ds”, the
SPORT mode will be automatically turned off.
“OFF” position:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
For normal driving and fuel economy, use the “OFF”
position.
“ON” position:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
For driving up or down long slopes where engine
braking is necessary, or for powerful acceleration, use
the “ON” position. The transmission will automatically
select a different gear ratio, allowing the engine to
provide high output.
When driving conditions change, push the switch to
turn the SPORT mode off.
Remember not to drive at high speeds for extended
periods of time with the SPORT mode in the “ON”
position. This reduces fuel economy.
Accelerator downshift - in the “D” position -
T32A130827-9B0959D9-CDA3-438D-BAD4-19B7455A9D16
For passing or climbing hills, depress the accelerator
pedal to the floor. This shifts the transmission down
into a lower gear, depending on the vehicle speed.
Shift lock release
T32A130827-09CD4710-D0CA-4864-9ACC-D217C7C4615A
If the battery is discharged, the shift lever may not be
moved from the “P” (Park) position even with the foot
brake pedal depressed.
To release the shift lock, perform the following
procedure:
Starting and driving 5-15
Condition: 'Except for China'/
(272,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-16 Starting and driving
Type A:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
JVS0392X
Example
1. Place the ignition switch in the “OFF” or “LOCK”
position.
2. Apply the parking brake.
3. Remove the shift lock release cover (shown in the
illustration above) using a suitable tool.
4. Insert the mechanical key and push down the shift
lock release.
5. Press the shift lever button and move the shift
lever to the “N” (Neutral) position while holding
down the shift lock release. Replace the removed
shift lock release cover after the operation.
Type B:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
JVS0466X
1. Place the ignition switch in the “OFF” or “LOCK”
position.
2. Apply the parking brake.
3. Depress the shift lock release button.
4. Press the shift lever button and move the shift
lever to the “N” (Neutral) position while holding
down the shift lock release.
Place the ignition switch in the “ON” position to
release the steering wheel lock.
The vehicle may be moved, by pushing, to the desired
location.
If the shift lever cannot be moved out of the “P” (Park)
position, have a NISSAN dealer check the CVT system
as soon as possible.
High fluid temperature protection mode
T32A130827-808BD7D2-9BE0-470E-A660-24B385D4FB8A
This transmission has a high fluid temperature protec-
tion mode. If the fluid temperature becomes too high
(for example, when climbing steep grades in high
temperature with heavy loads), engine power and,
under some conditions, vehicle speed will be de-
creased a utomatically to redu ce the chance of
transmission damage. Vehicle speed can be controlled
with the accelerator pedal, but engine and vehicle
speed may be limited.
Fail-safe
T32A130827-5877C85B-EA11-4DD6-9D52-6992317A74D5
When the fail-safe operation occurs, the CVT will not
be shifted to the selected driving position.
If the vehicle is driven under extreme conditions,
such as excessive wheel spinning and subse-
quent hard braking, the fail-safe system may be
activated. This will occur even if all electrical
circuits are functioning properly. In this case,
turn the ignition switch off and wait for 10
seconds. Then place the ignition switch back in
the “ON” position. The vehicle should return to
its normal operating condition. If it does not
return to its normal operating condition, have a
NISSAN d ealer check the transmi ssion and
repair it if necessary.
WARNING:
When the f ail-safe operation occurs, vehicle
speed may be gradually reduced. The reduced
speed may be lower than other traffic, which
could increase the chance of a collision. Be
especially careful when driving. If necessary, pull
to the side of the road at a safe place and allow
the transmission to return to normal operation,
or have it repaired if necessary.
Condition: 'Except for China'/
(273,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
DRIVING WITH MANUAL TRANSMISSION
(MT)
T32A130827-F9C2D0EE-1C88-43FA-80B1-BC9035D45F56
WARNING:
. Do not downshift abruptly on slippery roads.
This may cause a loss of vehicle control.
. Do not over-rev the engine when shifting to
a lower gear. This may cause a loss of
vehicle control or engine damage.
CAUTION:
. Do not rest your foot on the clutch pedal
while driving. This may damage the clutch
system.
. Fully depress the clutch pedal before shift-
ing to help prevent transmission damage.
. Stop the vehicle completely before shifting
into the “R” (Reverse) position.
. When the vehicle is stopped for a period of
time, for example waiting at stoplights, shift
to the “N” (Neutral) position and release the
clutch pedal with the foot brake pedal
depressed.
. Do not shift to the “N” (Neutral) position
while driving. Coasting with the transmis-
sion in the “N” (Neutral) position may cause
serious damage to the transmission.
Starting vehicle
T32A130827-79841C26-BFA7-47DD-85A1-81CD1AE3CABD
1. After starting the engine, depress the clutch pedal
to the floor and move the shift lever to the “1” (1st)
or “R” (Reverse) position.
2. Slowly depress the accelerator pedal, releasing
the clutch pedal and parking brake at the same
time.
Shifting gear
T32A130827-BA6FF761-6916-4D57-ADC5-149CCFDB8A10
To change gears, or when upshifting or downshifting,
fully depress the clutch pedal, shift into the appropriate
gear, then slowly and smoothly release the clutch
pedal.
To ensure smooth gear changes, fully depress the
clutch pedal before operating the shift lever. If the
clutch pedal is not fully depressed before the
transmission is shifted, a gear noise may be heard.
Transmission damage could occur.
Start the vehicle in the “1” (1st) position and shift to
the “2” (2nd), “3” (3rd), “4” (4th), “5” (5th) and “6”
(6th) gear in sequence according to the vehicle speed.
If it is difficult to move the shift lever into the “R”
(Reverse) or “1” (1st) position, shift to the “N” (Neutral)
position, and then release the clutch pedal once. Fully
depress the clutch pedal again and shift into “R” or “1”.
SSD0552
. To back up, stop the vehicle and move the shift
lever into the “N” (Neutral) position, and then pull
the ring
*
1
upward to shift into the “R” (Reverse)
position.
. The pull ring returns to its original position when
the shift lever is moved to the “N” (Neutral)
position.
Suggested maximum speed in each gear
T32A130827-751BC2BE-4FBE-40E4-87B2-7F6A039719BA
Downshift to a lower gear if the engine is not running
smoothly, or if you need to accelerate.
Do not exceed the maximum suggested speed (shown
below) in any gear. For level road driving, use the
highest gear suggested for that speed. Always observe
posted speed limits, and drive according to the road
conditions which will ensure safe operation. Do not
over-rev the engine when shifting to a lower gear as it
may cause engine damage or loss of vehicle control.
MR20DD engine model:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
km/h (MPH)
1st
45 (28)
2nd
79 (49)
3rd
110 (68)
4th
143 (89)
5th & 6th
— (—)
Starting and driving 5-17
Condition: 'Except for China'/
(274,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-18 Starting and driving
R9M engine model :
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
km/h (MPH)
1st
35 (22)
2nd
63 (39)
3rd
98 (61)
4th
136 (85)
5th & 6th
— (—)
GEAR SHIFT INDICATOR (if equipped)
GUID-AE4B246D-E5F4-4910-9BC9-041317659762
JVS0331X
Gear Shift Indicator appears in the vehicle information
display when the driver should shift into a higher or
lower gear as indicated by the up or down arrow.
The use of Gear Shift Indicator will help to reduce fuel
consumption.
When the up arrow appears, upshifting is recom-
mended. When the down arrow appears, downshifting
is recommended.
CAUTION:
Gear Shift Indicator helps to reduce fuel con-
sumption. It does not recommend the appro-
priate gear shift for all driving situations. In a
certain situations, only the driver can select the
correct gear (for example, when overtaking,
driving up a steep gradient or towing a trailer).
GUID-EB925B64-34B7-44CF-8DDB-6D26A0E20FE2
The Stop/Start System or I dling Stop System is
designed to prevent unnecessary fuel consumption,
exhaust emissions, and noise during a journey:
. When you stop the vehicle with the brake pedal
depressed (CVT) or with the shift lever in “N”
(Neutral) and clutch pedal released (MT), the
engine is turned off automatically.
. When you release the brake pedal (CVT) or push
the clutch pedal (MT), the engine is automatically
turned on.
CAUTION:
At the end of the journey the engine must be
stopped and ignition turned off. Lock the vehicle
as normal. Turning the ignition switch OFF will
shut down all electrical systems. Failure to do
this may result in a flat battery.
NOTE:
For model with Stop/Start System or Idling Stop
System, use the special battery that is enhanced
in regard to the charge-discharge capacity and
life performance. A void using a non-special
battery for the Stop/Start System or Idling Stop
System, as this may cause early deterioration of
the battery or a malfunction of the Stop/Start
System or Idling Stop System. For the battery, it
is recommended to use Genuine NISSAN parts.
For more information, contact a NISSAN dealer.
NOTE:
The Stop/Start System or Idling Stop System
will not activate under the following conditions:
. when the engine is kept idling without any
driving after the engine is turned on.
STOP/START SYSTEM OR IDLING
STOP SYSTEM (if equipped)
Condition: 'Except for China'/
(275,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
. when the engine coolant temperature is low.
. when the battery capacity is low.
. when the battery temperature is low.
. when the vehicle is moved.
. when the vacuum in the brake servo de-
creases.
. when the engine hood is opened with the
engine running.
. when the engine is turned on with the
engine hood open.
. when the driver’s seat belt is not fastened.
. when the driver’s door is open.
. when the steering wheel is operated (for
CVT model).
. when the Stop/Start or Idling Stop System
indicator blinks at a low speed.
. when the fan speed control is in any position
other than “OFF” (0) whi le the air flow
control is in the front defogger position.
. when the front defogger switch is on.
. when the temperature inside the vehicle is
too high or low. (When the air conditioner is
off, the Stop/Start System or Idling Stop
System will operate.)
. when the fan speed of the air conditioner is
set to the maximum speed.
. when the Stop/Start or Idling Stop OFF
switch is turned on.
. when the power consumption is large.
. when the vehicle is traveling at altitudes
higher than 2,000 m (6,562 ft) (for MT model).
. when the vehicle is travelling at altitudes
higher than 1500m (4922 ft) (R9M engine in
combination with CVT models).
. For Manual Transmission (MT) models
— when the shift lever is in any position
except the “N” (Neutral) position.
— when the clutch pedal is depressed.
— when the Intelligent Key is not in the
vehicle.
. For Cont inuously Variable Transmission
(CVT) models
— when the accelerator pedal is depressed.
— when the shift lever is in the “R” (Reverse)
position.
— when the brake pedal is not firmly
depressed.
— when stopping the vehicle on steep
sloping roads.
. when the electric power steering warning
light, the Anti-lock Braking System (ABS)
warning light, or the Vehicle Dynamic Con-
trol (VDC)/Electronic Stability Program
(ESP) warning light illuminates.
NOTE:
The engine will not restart even if the brake
pedal is released (CVT) or clutch pedal is
pressed (MT) while the Stop/Start System or
Idling Sto p System is activated under the
following condition:
. when the shift lever is in the “P” (Park)
position (CVT model).
. when the engine hood is opened.
. when the driver seat belt is unfastened and
the driver’s door is opened (MT model).
. when the gear shift lever is not in the Neutral
position (MT models).
NOTE:
It may take some time until the Stop/Start or
Idling Stop System activates under the following
conditions:
. when the battery is discharged.
. when the outside temperature is low or high.
. when the battery is replaced or the battery
terminal is disconnected for extended peri-
ods and then reconnected.
NOTE:
When the Stop/Star t System or Idling Stop
indicator illuminates, the engine starts running
automatically under at least one of the following
conditions:
. the brake pedal is released with the shift
lever in the “D” (Drive) or “N” (Neut ral )
position (for CVT model).
. the shift lever is placed in the “D” (Drive) or
“R” (Reverse) position from the “N” (Neutral)
or “P” (Park) position (for CVT model).
. the driver’s seat belt is unfastened, or the
driver’s door is open (for CVT model).
. the battery voltage becomes low (due to
electrical load from other vehicle systems
like headlights, heaters, etc., or auxiliary
devices connected to the 12 volt socket
inside the vehicle).
. the vehicle speed is above about 2 km/h (1
MPH).
. the front defogger is operated.
. when the temperature inside the vehicle is
too high or low. (When the air conditioner is
off, the Stop/Start System or Idling Stop
System will operate.)
Starting and driving 5-19
Condition: 'Except for China'/
(276,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-20 Starting and driving
. when the front defogger is turned on. (The
engine may not starts depending on the
outside temperature.)
. when more than 3 minutes have elapsed
since the Stop/Start System or Idling Stop
System was active (for CVT model).
. when the accelerator pedal is depressed (for
CVT model).
. when the steering wheel is operated. (The
steering wheel operation may become hea-
vy, but this is not a malfunction.) (for CVT
model)
. when the battery capacity is low.
. when the power consumption is high.
. when the shift lever is placed in the “R”
(Reverse) position (for CVT model).
. when the clutch pedal is depressed (for MT
model).
CAUTION:
Only engage gear when the clutch pedal is fully
depressed (for MT model).
NOTE:
The following conditions will prevent the Stop/
Start System or Idling Stop System from auto-
matically restarti ng the engine. S tarting the
engine with the ignition switch operation is then
necessary:
. the driver’s sea t belt is unfastened , and
driver’s door is open (for MT model).
. the hood is open.
Use this system while waiting at stoplight, etc. When
the vehicle is stopped for long periods of time, turn off
the engine.
When the engine is stopped by the Stop/Start System
or Idling Stop System, heating, cooling and dehumi-
difying functions will be deactivated. To avoid the air
conditioning functions from being deactivated, turn off
the Idling Stop mode by pressing the Stop/Start or
Idling Stop OFF switch.
STOP/START SYSTEM OR IDLING STOP
SYSTEM DISPLAY
GUID-D56CB066-F6D6-49D2-82F7-415D8907262F
Engine stop
GUID-78FEA13F-8F8D-4B8D-BC97-67B76FF15251
JVS0341X
When the engine is stopped the information is
displayed for a few seconds.
Stop/Start system or Idling Stop System ON
or OFF
GUID-6BC66795-C2D6-4F71-9A5B-5ECF0E05EDF2
JVS0342X
If the Stop/Start System or Idling Stop System is
activated or deactivated using the Stop/Start System
or Idling Stop System OFF switch, the message is
shown.
CO2 or fuel saved and engine stop time
GUID-D95A9EFA-4A9B-4F92-9873-69DBB336EB87
JVS0430X
The CO2 or fuel saved and the engine stop time mode
shows the following items:
. The CO2 saved shows the estimated quantity of
CO2 exhaust emissions that were prevented by
the Stop/Start System or Idling Stop System every
Condition: 'Except for China'/
(277,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
time the engine is automatically stopped. (for
Europe and South Africa)
. The fuel saved shows the estimated quantity of
fuel that were saved by the Idling Stop System
every time the engine is automatically stopped. (for
Australia and New Zealand)
. The engine stop time shows the time that the
engine has been stopped for by the Stop/Start
System or Idling Stop System.
For more information, see “Stop/Start System or Idling
Stop System” (P.5-18).
Auto start deactivation
GUID-78F505B8-38CC-427B-9D35-5D4561F762DD
JVS0344X
If the engine stops when the Stop/Start System or
Idling Stop System is activated, and will not start
automatically, the message is shown.
Key LOCK warning
GUID-6420A844-9349-439B-BBEA-8269875E380C
JVS0345X
The information is displayed and a buzzer sounded to
remind the driver to turn the ignition switch OFF to
avoid a flat battery.
The m essage can onl y be cleared by turnin g or
pushing the ignition switch OFF (or restarting the
engine).
System fault
GUID-A7C9F39F-370C-4A3E-A35A-DFC867451452
JVS0346X
This message is displayed w hen the Stop/Start
System or Idling Stop System is malfunctioning.
Have the system checked by a NISSAN dealer.
STOP/START OR IDLING STOP OFF
SWITCH
GUID-FF123EDF-F41B-49DE-9498-48D120562EA4
JVS0433X
The system can be temporarily deactivated by pressing
the Stop/Start or Idling Stop OFF switch. Pressing the
switch again or restarting the engine by using the
ignition switch will reactivate the Stop/Start System or
Idling Stop System.
. When the Stop/Start System or Idling Stop
System is deactivated while the engine is running,
the engine is prevented from automatically stop-
ping.
. When the Stop/Start System or Idling Stop
System is deactivated after the engine has been
automatically stopped by the Stop/Start System
or Idling Stop System, the engine will immediately
restart if suitable conditions are present. The
engine will then be prevented from automatically
stopping during the same journey.
. Whenever the Stop/Start System or Idling Stop
System is deactivated the indicator light
*
1
on
the Stop/Start or Idling Stop OFF switch illumi-
nates. In this condition the Stop/Start System or
Idling Stop System cannot prevent unnecessary
fuel consumption, exhaust emissions, or noise
during your journey.
Starting and driving 5-21
Condition: 'Except for China'/
(278,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-22 Starting and driving
. If the Stop/Start System or Idling Stop System is
malfunctioning, the indicator light
*
1
on the Stop/
Start or Idling Stop OFF switch illuminates.
NOTE:
The Stop/Start System ON or OFF messages
dis played for a few seconds in the vehicle
information display when the Stop/Start or
Idling Stop OFF switch is pressed. See “Stop/
Start system or Idling Stop System ON or OFF”
(P.5-20).
T32A130827-E8C4648E-2B44-40A2-A9F1-CD8F04FAE545
FOUR-WHEEL DRIVE (4WD) MODE
SWITCH OPERATIONS
T32A130827-E9652442-23D3-4F57-A857-6752C8B9C890
JVS0401X
4WD mode switch
The Four-Wheel Drive (4WD) system is used to select
the 2WD (Two-Wheel Drive), AUTO or LOCK mode
depending on the driving conditions.
Turn the 4WD mode switch, located on the center
console, to select 2WD, AUTO or LOCK.
AUTO: Turn the 4WD mode switch to the neutral
(AUTO) position. The Four-Wheel Drive (4WD) AUTO
indicator light
in the meter illuminates.
2WD: Turn the 4WD mode switch clockwise to the
2WD position.
LOCK: To engage the LOCK mode, turn the 4WD
mode switch counterclockwise to the LOCK position.
The switch will return to the AUTO position auto-
matically and the Four-Wheel Drive (4WD) LOCK
indicator light
in the meter illuminates. To
disengage the LOCK mode, turn the switch to the
LOCK position again. The switch will return to the
AUTO position automatically, and the 4WD LOCK
indicator light turns off.
FOUR-WHEEL DRIVE (4WD) (if
equipped)
Condition: 'Except for China'/
(279,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
4WD mode Wheels driven
4WD mode indicator light
( , )
Use conditions
2WD
Front wheels:
The wheel drive mode is in
Two-Wheel Drive (2WD)
when driving on a normal road.
*1
Turn off
For driving on dry,
paved roads
AUTO
Distribution of torque to the
front and rear wheels changes
automatically, depending on
road conditions encountered
[ratio; 100 : 0 (2WD) ? 50 :
50 (4WD)]. This results in
improved driving stability.
Illuminates
For driving on paved or
slippery roads
LOCK
Four-Wheel Drive (4WD)
*2*3*
Illuminate
/
For driving on rough
roads
*1: The 2WD mode may change to the 4WD mode automatically depending on the driving condition. The 4WD
mode indicator light does not illuminate.
*2: The LOCK mode will change to the AUTO mode automatically when the vehicle has been driven at a high
speed. The 4WD LOCK indicator light turns off.
*3: The LOCK mode will automatically be cancelled when the ignition switch is placed in the “OFF” position.
4WD shift tips
T32A130827-36A0B76C-CF6C-4546-B388-BD02EB8DB6F1
. If the 4WD mode switch is operated while making
a turn, accelerating or decelerating, or if the
ignition switch is turned off while in the AUTO or
LOCK mode, you may feel a jolt. This is normal.
. The oil tempera ture of power train parts will
increase if the vehicle is continuously operated
under conditions where the difference in rotation
between the front and rear wheels is large (wheel
slip), such as when driving the vehicle on rough
roads through sand or mud or when freeing a
stuck vehicle. In these cases, the “4WD High
Temp. Stop vehicle” warning appears and the
4WD mode changes to the 2WD mode to protect
the power train parts. If you stop driving with the
engine idling in a safe place and wait until the
“4WD High Temp. Stop vehicle” warning disap-
pears, the 4WD returns to the mode previously
selected.
. Brake distance in the 4WD mode is the same as
2WD.
CAUTION:
. Depending on the driving condition, the 4WD
mode may automatically change from 2WD
to 4WD even when the 2WD mode is
selected. If this occurs while driving, the
4WD mode indicator light will not illuminate.
. Do not start the engine with the 4WD mode
switch in any mode in the following cases:
— when the vehicle is placed on a free-
roller or jacking up the vehicle with the
front tires raised and the rear tires on
the ground.
Starting and driving 5-23
Condition: 'Except for China'/
(280,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-24 Starting and driving
— when towing the vehicle with the rear
tires raised from the ground.
. Operate the 4WD mode switch only when
driving straight. Do not operate the 4WD
mode switch when making a turn or backing
up.
. Do not operate the 4WD mode switch with
the front wheel spinning.
. Engine idling speed is high while warming
up the engine. Be especially careful when
starting or driving on slippery surfaces with
the 4WD mode switch set in the AUTO mode.
4WD WARNING
GUID-23709BED-21E1-4D10-B889-D097C5F3D412
If any malfunction occurs in the Four-Wheel Drive
(4WD) system while the engine is running, warning
messages appear in the vehicle information display.
JVS0411X
If the “4WD system fault” warning
*
1
appears, there
may be a malfunction in the 4WD system. Reduce
vehicle speed and have your vehicle checked by a
NISSAN dealer as soon as possible.
The “4WD High Temp. Stop vehicle” (high tempera-
ture) warning
*
2
may appear while trying to free a
stuck vehicle due to increased oil temperature. The
driving mode may change to Two-Wheel Drive (2WD).
If this warning is displayed, stop the vehicle with the
engine idling, as soon as it is safe to do so. Then if the
warning turns off, you can continue driving.
The “Tyre size incorrect” warning
*
3
may appear if
there is a large difference between the diameters of
front and rear wheels. Pull off the road in a safe area,
with the engine idling. Check that all tire sizes are the
same, that the tire pressure is correct and that the tires
are not excessively worn. Change the 4WD mode
switch to the 2WD mode and do not drive fast.
If any warning message continues to be displayed,
have your vehicle checked by a NISSAN dealer as
soon as possible.
CAUTION:
. Do not operate the engine on a free roller
when any of the wheels raised.
. If the “4WD system fault” warning appears
while driving, there may be a malfunction in
the 4WD system. Reduce the vehicle speed
and have your vehicle checked by a NISSAN
dealer as soon as possible. Be especially
careful when driving.
. The power train may be damaged if you
continue driving with the “4WD system fault”
warning on.
4WD MODE INDICATOR LIGHTS
T32A130827-369691F0-AE85-4F02-8C65-5AED24075D5A
The 4WD mode indic ator lights ( , ) are
located in the meter.
The 4WD mode indicator lights (
, ) illuminate
when the ignition switch is placed in the “ON” position.
The indicator lights turn off within 1 second.
The 4WD mode indicator lights will display the mode
selected by the 4WD mode switch while engine is
running.
The 4WD LOCK indicato r light
illuminates
simultaneously along with the 4WD AUTO indicator
light
when selecting the LOCK mode.
Condition: 'Except for China'/
(281,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
The 4WD AUTO indicator light illuminates when
selecting the AUTO mode.
If the 4WD warning message appears in the vehicle
information display, the 4WD mode indicator lights will
turn off.
FOUR-WHEEL DRIVE (4WD) TORQUE
DISTRIBUTION INDICATOR
GUID-84EA7676-E650-4703-AFC4-09971834FEA8
JVS0400X
When the “4x4-i” display is selected, you can view the
distribution ratio of the transmission torque to the front
and rear wheels during driving. The “4x4-i” display is
shown on the vehicle information display screen.
For more information, see “Trip computer” (P.2-34).
*
1
Distribution ratio of front wheels
*
2
Distribution ratio of rear wheels
WARNING:
Do not watch the screen for prolonged periods
of time while driving. Doing so could cause an
accident.
CAUTION:
The display may not change when the change of
torque dis tribution is small. This is not a
malfunction.
OFF-ROAD DRIVING SAFETY PRECAU-
TIONS
T32A130827-027ACF7F-C771-4B12-832A-1B7C545C2479
. Drive carefully when off the road a nd avoid
dangerous areas. Always wear your seat belts to
help keep you and your passengers in position
when driving over rough terrain.
. Before driving up or down grades, check the road
surface for bumps or potholes. Be sure to climb a
gentle slope and descend a gentle slope.
. Do not drive across steep slopes. Instead drive
either straight up or straight down the slopes. Off-
road vehicles can tip over sideways much more
easily than they can forward or backward.
. To prevent damage to the vehicle, do not drive on
dry and hard surface roads in the LOCK mode.
. Many hills are too steep for any vehicle. If you drive
up them, you may stall. If you drive down them, you
may not be able to control your speed. If you drive
across them, you may roll over.
. Do not shift gears while driving on downhill grades
as this could cause loss of control of the vehicle.
. Be sure to use the engine brake. The foot brake
performance may be re duced, resulting in a
possible accident.
. Stay alert when driving to the top of a hill. At the
top there could be a drop-off or other hazard that
could cause an accident.
. If your engine stalls or you cannot make it to the
top of a steep hill, never attempt to turn around.
Your vehicle could tip or roll over. Always back
straight down in reverse gear. Never back down in
the “N” (Neutral) position using only the brake, as
this could cause loss of control.
. Heavy braking going down a hill could cause the
brakes to overheat and fade, resulting in loss of
control and an accident. Apply brakes lightly and
use a low gear to control your speed.
. Unsecured luggage can be thrown around when
driving over rough terrain. Properly secure it so
that it will not be thrown forward and cause injury
to you or your passengers.
. To avoid raising the center of gravity excessively,
do not exceed the rated capacity of the roof rack/
gear bin (if equipped) and evenly distribute the
load. Secure heavy loads in the luggage area as
far forward and as low as possible. Do not equip
the vehicle with tires larger than specified. This
could cause your vehicle to rollover.
. Do not grip the inside or spokes of the steering
wheel when driving off-road. The steering wheel
could jerk and injure your hands. Instead drive with
your fingers and thumbs on the outside of the rim.
. Before operating vehicle, ensure that the driver
and all passengers have their seat belts fastened.
. Always drive with the floor mats in place as the
floor may become very hot. Particular care should
be taken if you are barefoot.
. Lower you r speed when encountering strong
crosswinds. With its higher center of gravity, your
vehicle is more affected by gusty side winds.
Slower speeds ensure better vehicle control.
. Do not drive beyond the performance of the
tires even with 4WD.
Sudden acceleration, sharp steering maneu-
vers or sudden braking may cause loss of
control.
Starting and driving 5-25
Condition: 'Except for China'/
(282,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-26 Starting and driving
. Always use tires of the same type, size, brand,
construction (bias, bias-belted or radial), and
tread pattern on all four wheels. Install tire chains
on the front wheels when driving on slippery roads
and drive carefully.
. Be sure to check the brakes immediately after
driving in mud or water. (See “Brake system” (P.5-
57).)
. Whenever you drive off-road through sand, mud or
water as deep as the wheel hub, more frequent
maintenance may be required. For details, refer to
“Maintenance for off-road driving” in a separate
maintenance booklet.
. Avoid parking your vehicle on steep hills. If you get
out of the vehicle and it rolls forward, backward or
sideways, you could be injured.
TIRES OF 4WD MODEL
T32A130827-AE5C0353-CEE0-4F0C-8B42-DD14B0A90107
CAUTION:
. Always use tires of the same size, brand,
construction (bias, bias- belted or radial),
and tread pattern on all four wheels. Failure
to do so may result in a circumference
difference between tires on the front and
rear axles which will cause excessive tire
wear and may damage the transmission,
transfer case and rear differential gears.
. Only use spare tires specified for each 4WD
model.
If excessive tire wear is found, it is recommended that
all four tires be replaced with tires of the same size,
brand, construction and tread pattern. The tire
pressure and wheel alignment should also be checked
and corrected as necessar y. Contact a NISS AN
dealer.
Snow tires
T32A130827-786C9A7D-5F2C-4C44-8252-7577B2315AD6
If you install snow tires, they must also be the same
size, brand, construction and tread pattern on all four
wheels.
Tire inflation pressure
T32A130827-02F5E13F-EB84-4678-B8E3-01C847020459
Check the pressures in all tires, including the spare,
with a gauge periodically when at a service station.
Adjust to the specified pressure if necessary. Tire
pressures are shown on the tire placard.
Tire rotation
T32A130827-BCA9ABF3-4A1A-425E-8276-807FAAD0A08E
NISSAN recommends that tires be rotated every 5,000
km (3,000 miles). Do not include the spare tire in the
tire rotation.
Tire chain
T32A130827-612057E2-0991-4824-9088-F44BB593B9BC
Tire chains must be installed only on the front
wheels and not on the rear wheels.
Do not drive with tire chains on paved roads which are
clear of snow. Driving with chains in such conditions
can cause damage to the various mechanisms of the
vehicle due to some overstress.
GUID-282AEC18-4435-4758-87F0-FE282A2B8D35
Except for Europe: Vehicle Dynamic Control
(VDC) system
For Europe: Electronic Stability Program (ESP)
system
WARNING:
. The VDC/ESP system is designed to help the
driver maintain stability but does not pre-
vent accidents due to abrupt steering opera-
tion at high speeds or by careles s o r
dangerous driving techniques. Reduce vehi-
cle speed and be especially careful when
driving and cornering on slippery surfaces
and always drive carefully.
. Do not modify the vehicle’s suspension. If
suspension parts such as shock absorbers,
struts, springs, stabilizer bars, bushings and
wheels are not NISSAN recommended for
your vehicle or are extremely deteriorated,
t he VDC/ESP system may not operate
properly. This could adversely affect vehicle
handling performance, and the VDC/ESP
warning light
may illuminate.
. If brake related parts such as brake pads,
rotors and calipers are not NISSAN recom-
mended or are extremely deteriorated, the
VDC/ESP system may not operate properly
and the VDC/ESP warning light
may
illuminate.
. If engine control related parts are not
NISSAN recommen ded or are extremely
deteriorated, the VDC/ESP warning light
may illuminate.
. When driving on extremely inclined surfaces
such as higher banked corners, the VDC/
ESP system may not operate properly and
VEHICLE DYNAMIC CONTROL
(VDC)/ELECTRONIC STABILITY
PROGRAM (ESP) SYSTEM
Condition: 'Except for China'/
(283,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
the VDC/ESP warning light may illumi-
nate. Do not drive on these types of roads.
. When driving on an unstable surface such as
a turntable, ferry, elevator or ramp, the VDC/
ESP warning light
may illuminate. This
is not a malfunction. Restart the engine after
driving onto a stable surface.
. If wheels or tires other than the NISSAN
recommended ones are used, the VDC/ESP
system may not operate properly and the
VDC/ESP warning light
may illuminate.
. The VDC/ESP system is not a substitute for
winter tires or tire chains on a snow covered
road.
The Vehicle Dynamic Control (VDC)/Electronic Stabi-
lity Program (ESP) system uses various sensors to
monitor driver inputs and vehicle motion. Under certain
driving conditions, the VDC/ESP system helps to
perform the following functions.
. Controls brake pressure to reduce wheel slip on
one slipping drive wheel so power is transferred to
a non slipping drive wheel on the same axle.
. Controls brake pressure and engine output to
reduce drive wheel slip based on vehicle speed
(traction control function).
. Controls brake pressure at individual wheels and
engine output to help the driver maintain control of
the vehicle in the following conditions:
— understeer (vehicle tends to not follow the
steered path despite increased steering input)
— oversteer (vehicle tends to spin due to certain
road or driving conditions).
The VDC/ESP system can help the driver to maintain
control of the vehicle, but it cannot prevent loss of
vehicle control in all driving situations.
When the VDC/ESP system operates, the VDC/ESP
warning light
in the meter flashes so note the
following:
. The road may be slippery or the system may
determine some action is required to help the
vehicle on the steered path.
. You may feel a pulsation in the brake pedal and
hear a noise or vibration from under the hood. This
is normal and indicates that the VDC/ESP system
is working properly.
. Adjust your speed and driving to the road
conditions.
If a malfunction occurs in the system, the VDC/ESP
warning light
illuminates in the meter. The VDC/
ESP system automatically turns off.
The VDC/ESP OFF switch is used to turn off the VDC/
ESP system. The VDC/ESP off indicator light
illuminates to indicate the VDC/ESP system is off.
When the VDC/ESP OFF switch is used to turn off the
system, the VDC/ESP system still operates to prevent
one drive wheel from slipping by transferring power to
a non slipping drive wheel. The VDC/ESP warning light
flashes if this occurs. All othe r VDC/E SP
functions are off and the VDC/ESP warning light
will not flash. The VDC/ESP system is auto-
matically reset to on when the ignition switch is placed
in the “OFF” position then back to the “ON” position.
See “Vehicle Dynamic Control (VDC) warning light/
Electronic Stability Program (ESP) warning light” (P.2-
16) and “Vehicle Dynamic Control (VDC) off indicator
light/Electronic Stability Program (ESP) off indicator
light” (P.2-19).
The computer has a built-in diagnostic feature that
tests the system each time you start the engine and
move the vehicle forward or in reverse at a slow speed.
When the self-test occurs, you may hear a “clunk”
noise and/or feel a pulsation in the brake pedal. This is
normal and is not an indication of a malfunction.
VEHICLE DYNAMIC CONTROL (VDC)/
ELECTRONIC STABILITY PROGRAM (ESP)
SYSTEM OFF SWITCH
GUID-6741A6E6-5C87-4519-ADE2-B1D05929FA1D
SSD1149
The vehicle should be driven with the Vehicle Dynamic
Control (VDC)/Electr onic Stab ility Program (ESP)
system ON for most driving conditions.
When the vehicle is stuck in mud or snow, the VDC/
ESP system reduces the engine output to reduce
wheel spin. The engine speed will be reduced even if
the accelerator is depressed to the floor. If maximum
engine power is needed to free a stuck vehicle, turn
the VDC/ESP system off.
To turn off the VDC/ESP system, push the VDC/ESP
OFF switch. The VDC/ESP off indicator light
will
illuminate.
Push the VDC/ESP OFF switch again or restart the
engine to turn ON the system.
Starting and driving 5-27
Condition: 'Except for China'/
(284,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-28 Starting and driving
GUID-D61024E5-C48F-496E-ADD2-05254F815CE1
The chassis control is an electric control module that
includes the following functions:
. Active Trace Control
. Active Engine Brake
. Active Ride Control
ACTIVE TRACE CONTROL
GUID-A194BC39-5509-44A9-B0A4-D7DB6C5B4131
This system senses driving based on the driver’s
steering and acceleration/braking patterns, and con-
trols brake pressure at individual wheels to aid tracing
at corners and help smooth vehicle response.
The Active Trace Control can be set to ON (enabled)
or OFF (disabled) through the Vehicle Information
Display “Settings” page. See “Vehicle information
display” (P.2-20) for more information.
When the Vehicle Dynamic Control (VDC)/Electronic
Stability Program (ESP) OFF switch is used to turn off
the VDC/ESP system, the Active Trace Control is also
turned off.
JVS0403X
When the Active Trace Control is operated and the
“Chassis Control” mode is selected in the trip
comp uter, the Active Tr ace Control graphics are
shown in the vehicle information display. (See “Trip
computer” (P.2-34).)
If the chassis control warning message appears in the
vehicle information display, it may indicate that the
Active Trace Control is not functioning properly. Have
the system checked by a NISSAN dealer as soon as
possible. (See “Vehicle information display warnings
and indicators” (P.2-28).)
WARNING:
The Active Trace Control may not be effective
depending on the driving condition. Always drive
carefully and attentively.
When the Active Trace Control is operating, you may
feel a pulsation in the brake pedal and hear a noise.
This is normal and indicates that the Active Trace
Control is operating properly.
Even if the Active Trace Control is set to OFF, some
functions will remain on to assist the driver (for
example, avoidance scenes).
ACTIVE ENGINE BRAKE (Continuously
Variable Transmission (CVT) models)
GUID-0FF9DFF6-696E-4189-AD9D-E1914B89F4E4
The Active Engine Brake function adds subtle decel-
eration by controlling CVT gear ratio, depending on the
cornering condition calculated from driver’s steering
input and plural sensors. This benefit to easier
traceability and less workload of adjusting speed with
braking at corners.
The Active Engine Brake also adds subtle deceleration
with gear ratio control according to driver’s brake
pedal operation.
The Active Engine Brake can be set to ON (enabled) or
OFF (disabled) through the Vehicle Information Display
“Settings” page. See “Vehicle information display”
(P.2-20) for more information.
CHASSIS CONTROL
Condition: 'Except for China'/
(285,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
JVS0403X
When the Active Engine Brake is operated at corners
and the “Chassis Control” mode is selected in the trip
computer, the Active Engine Brake graphics are shown
in the vehicle information display. See “Trip computer”
(P.2-34) for more information.
If the chassis control warning message appears in the
vehicle information display, it may indicate that the
Active Engine Brake is not functioning properly. Have
the system checked by a NISSAN dealer as soon as
possible.
WARNING:
The Active Engine Brake may not be effective
depending on the driving condition. Always drive
carefully and attentively.
When the Active Engine Brake is operating, the needle
of the tachometer will rise up and you may hear an
engine noise. This is normal and indicates that the
Active Engine Brake is operating properly.
ACTIVE RIDE CONTROL
GUID-EE92B57E-E6A7-47CC-8CBE-738B0F9EF222
This system senses upper body motion based on
wheel speed information and controls engine torque
and four wheel brake pressure to enhance ride comfort
in effort to restrain uncomfortable upper body move-
ment. This system come into effect above 40 km/h (25
MPH). When the VDC/ESP OFF switch is used to turn
off the VDC/ESP system, the Active Ride Control is
also turned off. Engine torque control is available for
MR20 and QR25 engines only.
JVS0398X
When the brake control of the Active Ride Control is
operated and the “Chassis Control” mode is selected
in the trip computer, the Active Ride Control graphics
are shown in the vehicle information display. See “Trip
computer” (P.2-34) for more information.
If the chassis control warning message appears in the
vehicle information display, it may indicate that the
Active Ride Control is not functioning properly. Have
the system checked by a NISSAN dealer as soon as
possible.
When the Active Ride Control is operating, you may
hear noise and sense slight deceleration. This is normal
and indicates that the Active Ride Control is operating
properly.
Starting and driving 5-29
Condition: 'Except for China'/
(286,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-30 Starting and driving
GUID-778037C2-4069-417C-90C0-40F4092CEE51
WARNING:
. Never rely solely on the hill start assist
system to prevent the vehicle from moving
backward on a hill. Always drive carefully
and attentively. Depress the brake pedal
when the vehicle is stopped on a steep hill.
Be especially careful when stopped on a hill
on frozen or muddy roads. Failure to prevent
the veh icle from rolling backwards may
result in a loss of control of the vehicle and
possible serious injury or death.
. The hill start assist system is not designed to
hold the vehicle at a standstill on a hill.
Depress the brake pedal when the vehicle is
stopped on a steep hill. Failure to do so may
cause the vehicle to roll backwards and may
resul t in a collision or serious personal
injury.
. The hill start assist system may not prevent
the vehicle from rolling backwards on a hill
under all load or road conditions. Always be
prepar ed to depress the brake pedal to
prevent the vehicle from rolling backwards.
Failure to do so may result in a collision or
serious personal injury.
The hill start assist system automatically keeps the
brakes applied to help prevent the vehicle from rolling
backwards in the time it takes the driver to release the
brake pedal and apply the accelerator when the vehicle
is stopped on a hill.
The hill start assist system will operate automatically
under the following conditions:
. The transmission is shifted to a forward or reverse
gear.
. The vehicle is stopped completely on a hill by
applying the brake.
The maximum holding time is 2 seconds. After 2
seconds the vehicle will begin to roll back and the hill
start assist system will stop operating completely.
The hill start assist system will not operate when the
transmission is shifted to the “N” (Neutral) or “P” (Park)
position or on a flat and level road.
When the Vehicle Dynamic Control (VDC)/Electronic
Stability Program (ESP) warning light illuminates in the
meter, the hill start assist system will not operate. (See
“Vehicle Dynamic Control (VDC) warning light/Elec-
tronic Stability Program (ESP) warning light” (P.2-16).)
T32A130827-BF217822-AA17-4F95-BAE1-62EB7B0C2508
WARNING:
. Never rely solely on the hill descent control
system to control vehicle speed when driv-
ing on steep downhill grades. Always drive
carefully when using the hill descent control
system and decelerate the vehicle speed by
depressing the brake pedal if necessary. Be
especially careful when driving on frozen,
muddy or extremely steep downhill roads.
Failure to control vehicle speed may result in
a loss of control of the vehicle and possible
serious injury or death.
. The hill descent control system may not
control the vehicle speed on a hill under all
load or road conditions. Always be prepared
to depress the brake pedal to control vehicle
speed. Failure to do so may result in a
collision or serious personal injury.
CAUTION:
When the hill descent control system operates
continuously for a long time, the temperature of
the Vehicle Dynamic Control (VDC)/Electronic
Stability Program (ESP) system actuator may
increase and the hill descent control system may
be temporarily disabled (the hill descent control
system on indicator light will blink). If the
indicator light does not come on continuously
after blinking, stop using the system.
When the hill descent control system is activated, it
automatically applies smooth brakes to control speed
on a steep and slippery descent or off the road without
brake or accelerator operation.
The hill descent control system helps maintain vehicle
speed when driving under 25 km/h (15 MPH) on a
HILL START ASSIST SYSTEM
HILL DESCENT CONTROL SYSTEM
(if equipped)
Condition: 'Except for China'/
(287,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
steep descent that engine braking alone in Four-Wheel
Drive (4WD) mode cannot control the speed.
When driving forward on the descent, the speed can
be adjusted by the brake or accelerator operation. The
system maintains the speed for reverse driving on the
descent.
HILL DESCENT CONTROL SWITCH
T32A130827-A22A42E7-41B2-4114-88DB-9E1B7BDE94E3
JVS0402X
When additional braking is required on steep downhill
roads, activate the hill descent control system by
pushing the hill descent control switch on.
When the hill descent control system is activated, the
hill descent control system on indicator light
will
il luminate. (See “Hill descent control system on
indicator light” (P.2-18).) Also, the stop/tail lights
illuminate while the hill descent control system is
applying the brakes to control the vehicle speed.
To activate the hill descent control system, satisfy all of
the following conditions:
. Shift the transmission to the forward or reverse
gear.
. Turn the 4WD mode switch to the LOCK mode
and drive the vehicle at a speed under 25 km/h
(15 MPH).
. Push the hill descent control switch to the “ON”
position.
If the accelerator or brake pedal is depressed while the
hill descent control system is on, the system will stop
operating temporarily. As soon as the accelerator or
brake pedal is released, the hill descent control system
begins to function again if the hill descent control
operating conditions are fulfilled.
The hill descent control system on indicator light blinks
if the hill descent control switch is on and all conditions
for system activation are not met, or if the system
becomes disengaged for any reason.
When the vehicle speed exceeds 40 km/h (25 MPH),
the 4WD mode indicator light changes from LOCK to
AUTO. Once the speed decreases to 25 km/h (15
MPH), turn the 4WD mode switch to LOCK again to
turn on the hill descent control system.
To turn off the hill descent control system, push the hill
descent control switch to the OFF position.
GUID-89EA2F2C-B11E-4266-AE54-208D2C55EC10
The Blind Spot Warning (BSW) system helps alert the
driv er of other vehicles in adjacen t lanes when
changing lanes.
The Lane Departure Warning (LDW) system helps
alert the driver when the vehicle is traveling close to
either the left or the right of a traveling lane.
JVS0390X
The BSW/LDW systems use the rearview camera unit
*
1
with automatic washer and blower.
WARNING:
. The BSW system is not a replacement for
proper driving procedur e and is not de-
signed to prevent contact with vehicles or
objects. When changing lanes, always use
the side and rear mirrors and turn and look
in the direction you will move to ensure it is
safe to change lanes. Never rely solely on
the BSW system.
. The LDW system is only a warning device to
help inform the driver of a potential unin-
tended lane departure. It will not steer the
vehicle or prevent loss of control. It is the
driver’ s re sponsibility to stay alert, drive
safely, keep the vehicle in the traveling lane,
Starting and driving 5-31
BLIND SPOT WARNING (BSW)/
LANE DEPARTURE WARNING (LDW)
SYSTEMS (if equipped)
Condition: 'Except for China'/
(288,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-32 Starting and driving
and be in control of the vehicle at all times.
. The camera unit may not function properly
under the following conditions:
— When towing a trailer (for Australia, New
Zealand and South Africa).
— When strong light enters the camera
unit. (For example, light directly shines
on the rear of the vehicle at sunrise or
sunset.)
— When ambient brightness changes sud-
denly. (For example, when the vehicle
enters or exits a tunnel or passes under
a bridge.)
. If the camera lens is excessively dirty, the
a utomatic washer may no t be able to
completely clean the lens. This could result
in the camera not detecting vehicles or lane
markers.
. Excessive noise (for example, audio system
volume, open vehicle window) will interfere
with the chime sound, and it may not be
heard.
BSW SYSTEM OPERATION
GUID-B0752A1A-BABA-4290-8BA3-3341D61D39CF
JVS0410X
Blind Spot Indicator light
SSD1029
BSW indicator (in the Vehicle information display)
The BSW system operates above approximately 32
km/h (20 MPH).
When the camera unit detects vehicles in the detection
zone, the Blind Spot Indicator light located inside the
outside mirrors will illuminate. If the turn signal is then
activated, the system chimes (twice) and the Blind
Spot Indicator light flashes to alert the driver.
The Blind Spot Indicator light continues to flash until
the detected vehicle(s) leave the detection zone.
Detection zone
GUID-2790FC89-5625-4979-A03D-DDB0DA0F2FFF
SSD1026
The camera unit can detect vehicles on either side of
your vehicle when part of another vehicle is within the
detection zone shown as illustrated.
This detection zone typically starts from the outside
mirror of your vehicle and extends approximately 3 m
(10 ft) behind the rear bumper, and approximately 3 m
(10 ft) sideways.
NOTE:
The Blind Spot Indicator light will illuminate for
a few seconds when the ignition switch is placed
in the “ON” position.
The brightness of the Blind Spot Indicator lights is
adjusted automatically depending on the brightness of
the ambient light.
A chime sounds i f the camera unit has alread y
detected vehicles when the driver activates the turn
signal. If a vehicle comes into the detection zone after
the driver activates the turn signal, then only the Blind
Spot Indicator light flashes and no chime sounds. (See
“BSW driving situations” (P.5-33).)
Condition: 'Except for China'/
(289,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Turning on or off the BSW system
GUID-49A8BFB0-B3F3-468A-9FCD-7263F12A4EC8
The BSW system is turned on or off using the settings
menu in the vehicle information display.
SYSTEM ON:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The BSW indicator (white) in the vehicle information
display will appear.
SYSTEM OFF:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The BSW indicator (white) in the vehicle information
display will off.
Perform the following steps to enable or disable the
BSW system.
1. Use the
button until “Settings” displays in the
vehicle information display. Use the
to select
“Driver Assistance”. Then press the ENTER
button.
2. Select “Driving Aids”, and press the E NTER
button.
3. To set the BSW system to on or off, use the
buttons to navigate in the menu and use the
ENTER button to select or change an item:
.
Select “Blind Spot” and press the ENTER
button.
.
To turn on the warning, use the ENTER button
to check box for “Warning (BSW)”
WARNING:
. The camera unit may not be able to detect
when certain objects are present such as:
— Pedestrians, bicycles, animals
— Some types of small vehicles such as
motorcycles and very short length vehi-
cles
— Oncoming vehicles
— A vehicle approaching rapidly from be-
hind. (See “BSW driving situations” (P.5-
33).)
— A vehicle which your vehicle overtakes
rapidly. (See “BSW driving situations”
(P.5-33).)
— A vehicle that merges or changes lanes
rapidly directly next to your vehicle.
. The camera unit may not be able to detect
properly when your vehicle travels beside
the middle section of a vehicle with long
wheelbase (for example, trailer truck, semi-
trailer, tractor).
. The camera detect ion zone is designed
based on a s tandard lane width. W hen
driving in a wider lane, the camera unit
may not detect vehicles in an adjacent lane.
When driving in a narrow lane, the camera
unit may detect vehicles driving two lanes
away.
. The camera unit is designed to ignore most
stationary objects, however objects such as
guardrails, walls, foliage and parked vehi-
cles may occasionally be detected. This is a
normal operating condition.
. The camera unit may detect the reflected
image of vehicles or roadside objects that
are not actually in the detection zone,
especially when the road is wet.
BSW DRIVING SITUATIONS
GUID-FEA5903B-E854-4F9C-8E8D-28E430841AEF
Another vehicle approaching from behind
GUID-F89D0981-5288-497D-BC24-E907EB6D9313
SSD1026
The Blind Spot Indicator light illuminates if a vehicle
enters the detection zone from behind in an adjacent
lane.
However, if the overtaking vehicle is traveling much
faster than your vehicle, the indicator light may not
illuminate before the detected vehicle is beside your
vehicle. Always use the side and rear mirrors and turn
and look in the direction your vehicle will move to
ensure it is safe to change lanes.
SSD1031
If the driver activates the turn signal, then the Blind
Starting and driving 5-33
Condition: 'Except for China'/
(290,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-34 Starting and driving
Spot Indicator light flashes and a chime will sound
twice.
NOTE:
If the driver activates the turn signal before a
vehicle enters the detection zone, the Blind Spot
Indicator light will flash but no chime will sound
when the other vehicle is detected.
Overtaking other vehicles
GUID-E666802A-D0AA-4CCC-93A3-7E40B34F9D50
SSD1033
The Blind Spot Indicator light illum inates if you
over take a vehicle and that vehicle stays in the
detection zone for approximately 3 seconds.
The camera unit may not det ect slower moving
vehicles if they are passed quickly.
SSD1034
If the driver activates the turn signal while another
vehicle is in the detection zone, then the Blind Spot
Indicator light flashes and a chime will sound twice.
LDW SYSTEM OPERATION
GUID-4034C8A5-42F4-43F7-ACDC-12C0802A1C21
JVS0154X
SSD0672
LDW indicator (in the Vehicle information display)
The LDW system operates above approximately 70
km/h (45 MPH).
When the vehicle approaches either the left or the right
of the traveling lane, the LDW system will chime a
sound and the LDW indicator (orange) on the meter
will blink to alert the driver.
The LDW system is not designed to operate under the
following conditions.
. When you operate the lane change signal and
change traveling lanes in the direction of the
signal. (The LDW system will become operable
again approximately 2 seconds after the lane
change signal is turned off.)
. When the vehicle speed is less than approximately
70 km/h (45 MPH).
Turning on or off the LDW system
GUID-B08B8916-4955-49C9-868B-C87526046CEF
The LDW system is turned on or off using the settings
menu in the vehicle information display.
Condition: 'Except for China'/
(291,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
SYSTEM ON:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The LDW indicator (white) in the vehicle information
display will appear.
SYSTEM OFF:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The LDW indicator (white) in the vehicle information
display will off.
Perform the following steps to enable or disable the
LDW system.
1. Use the
button until “Settings” displays in the
vehicle information display. Use the
to select
“Driver Assistance”. Then press the ENTER
button.
2. Select “Driving Aids”, and press the E NTER
button.
3. To set the LDW system to on or off, use the
buttons to navigate in the menu and use the
ENTER button to select “Lane” and press the
ENTER button.
WARNING:
. The camera unit may not be able to detect
properly under the following conditions:
— On roads where there a re multipl e
parallel lane markers; lane markers that
are faded or not painted clearly; yellow
painted lane markers; nonstandard lane
markers; or lane markers covered with
water, dirt, snow, etc.
— On roads where the discontinued lane
markers are still detectable.
— On roads where there are sharp curves.
— On roads where there are sharply con-
trasting objects, such as shadows,
snow, water, wheel ruts, seams or lines
remaining after road repairs. (The LDW
system could detect these items as lane
markers.)
— On roads where the traveling lane
merges or separates.
— When the vehicle’s traveling direction
does not align with the lane marker.
— When the road surface is very dark due
to weak ambient light or impaired tail
lamp.
. When driving on a curved road, warning will
be late on the outside of the curve.
BSW/LDW TEMPORARY DISABLED STA-
TUS
GUID-1BDDF44E-AFF2-4E00-9455-635AEAA0FD68
Under the following condition, the BSW and/or LDW
system is turned off temporarily, the BSW indicator
(white) and/or LDW indicator (white) will blink, and the
following message will appear in the vehicle informa-
tion display:
. “Back Door Open”
When the above condition is corrected, the BSW and/
or LDW system will resume automatically.
BSW/LDW AUTOMATIC DEACTIVATION
GUID-2F69DEE5-07A4-4D46-9DF1-D415DC6DE324
When dirt, rain or snow accumulates on the camera,
the BSW and/or LDW system will be turned off
automatically and cannot be removed by the automatic
washer and blower. The BSW indicator (white) and/or
LDW indicator (white) will blink, and the “Not available
Clean Rear Camera” message will appear in the
vehicle information display.
Action to take:
If the message appears, park the vehicle in a safe
place, clean the camera unit with a soft cloth. Then turn
off and restart the engine.
BSW/LDW MALFUNCTION
GUID-BE72994E-5740-4BDE-86C1-2EB349CDBE95
When the BSW and/or LDW system malfunctions,
they will be turned off automatically, the BSW indicator
(orange) and/or LDW indicator (orange) will illuminate
and the “System fault” message will appear in the
vehicle information display.
Action to take:
Stop the vehicle in a safe location, turn off and restart
the engine. If the BSW indicator (orange) and/or LDW
indicator (orange) continues to illuminate, have the
BSW and/or LDW system checked by a NISSAN
dealer.
CAMERA UNIT MAINTENANCE
GUID-0EDFD818-00A6-4767-8847-3673FFD43878
JVS0393X
The rearview camera unit
*
1
for the LDW/BSW
systems is located above the rear licence plate. To
maintain th e p roper opera tion of the LDW/BSW
systems and help keep the system functioning, be
sure to observe the following:
. Always keep the camera unit clean. Be careful not
to damage the nozzle of automatic washer and
blower.
Starting and driving 5-35
Condition: 'Except for China'/
(292,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-36 Starting and driving
. Do not attach “licence plate accessories” that
reflect light.
. Do not strike or damage the areas around the
camera unit.
GUID-AE810235-F6F4-41E0-95C7-57E6B64668A9
The Blind Spot Warning (BSW) system helps alert the
driv er of other vehicles in adjacen t lanes when
changing lanes.
JVS0390X
The BSW system uses the rearview camera unit
*
1
with automatic washer and blower.
WARNING:
. The BSW system is not a replacement for
proper driving procedur e and is not de-
signed to prevent contact with vehicles or
objects. When changing lanes, always use
the side and rear mirrors and turn and look
in the direction you will move to ensure it is
safe to change lanes. Never rely solely on
the BSW system.
. The camera unit may not function properly
under the following conditions:
— When towing a trailer.
— When strong light enters the camera
unit. (For example, light directly shines
on the rear of the vehicle at sunrise or
sunset.)
— When ambient brightness changes sud-
denly. (For example, when the vehicle
enters or exits a tunnel or passes under
a bridge.)
. If the camera lens is excessively dirty, the
a utomatic washer may no t be able to
completely clean the lens. This could result
in the camera not detecting vehicles or lane
markers.
. Excessive noise (for example, audio system
volume, open vehicle window) will interfere
with the chime sound, and it may not be
heard.
BSW SYSTEM OPERATION
GUID-1BE5C541-A92F-45FC-8E28-F5276DC1762B
JVS0410X
Blind Spot Indicator light
BLIND SPOT WARNING (BSW)
SYSTEM (if equipped for Europe)
Condition: 'Except for China'/
(293,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
SSD1029
BSW indicator (in the Vehicle information display)
The BSW system operates above approximately 32
km/h (20 MPH).
The BSW light is shown in the vehicle information
display if the Blind Spot Warning system is active. To
switch the system on or off, see the description later in
this section.
When the camera unit detects vehicles in the detection
zone, the Blind Spot Indicator light located inside the
outside mirrors will illuminate. If the turn signal is then
activated, the system chimes (twice) and the Blind
Spot Indicator light flashes to alert the driver.
The Blind Spot Indicator light continues to flash until
the detected vehicle(s) leave the detection zone.
Detection zone
GUID-2E58C740-C1EB-4970-9F18-8C62C2600F46
SSD1026
The camera unit can detect vehicles on either side of
your vehicle when part of another vehicle is within the
detection zone shown as illustrated.
This detection zone typically starts from the outside
mirror of your vehicle and extends approximately 3 m
(10 ft) behind the rear bumper, and approximately 3 m
(10 ft) sideways.
The brightness of the Blind Spot Indicator lights is
adjusted automatically depending on the brightness of
the ambient light.
A chime sounds i f the camera unit has alread y
detected vehicles when the driver activates the turn
signal. If a vehicle comes into the detection zone after
the driver activates the turn signal, then only the Blind
Spot Indicator light flashes and no chime sounds. (See
“BSW driving situations” (P.5-33).)
Turning on or off the BSW system
GUID-14F6DA85-8579-42BD-89B5-D01358F2513E
The BSW system is turned on or off using the settings
menu in the vehicle information display.
SYSTEM ON:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The BSW indicator (white) in the vehicle information
display will appear.
SYSTEM OFF:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The BSW indicator in the vehicle information display
will turn off.
Perform the following steps to enable or disable the
BSW system.
1. Use the
button until “Settings” displays in the
vehicle information display. Use the
to select
“Driver Assistance”. Then press the ENTER
button.
2. Select “Driving Aids”, and press the E NTER
button.
3. To set the BSW system to on or off, use the
buttons to navigate in the menu and use the
ENTER button to select “Blind Spot” and press
the ENTER button.
WARNING:
. The camera unit may not be able to detect
when certain objects are present such as:
— Pedestrians, bicycles, animals
— Some types of small vehicles such as
motorcycles and very short length vehi-
cles
— Oncoming vehicles
— A vehicle approaching rapidly from be-
hind. (See “BSW driving situations” (P.5-
33).)
Starting and driving 5-37
Condition: 'Except for China'/
(294,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-38 Starting and driving
— A vehicle which your vehicle overtakes
rapidly. (See “BSW driving situations”
(P.5-33).)
— A vehicle that merges or changes lanes
rapidly directly next to your vehicle.
. The camera unit may not be able to detect
properly when your vehicle travels beside
the middle section of a vehicle with long
wheelbase (for example, trailer truck, semi-
trailer, tractor).
. The camera detect ion zone is designed
based on a s tandard lane width. W hen
driving in a wider lane, the camera unit
may not detect vehicles in an adjacent lane.
When driving in a narrow lane, the camera
unit may detect vehicles driving two lanes
away.
. The camera unit is designed to ignore most
stationary objects, however objects such as
guardrails, walls, foliage and parked vehi-
cles may occasionally be detected. This is a
normal operating condition.
. The camera unit may detect the reflected
image of vehicles or roadside objects that
are not actually in the detection zone,
especially when the road is wet.
BSW DRIVING SITUATIONS
GUID-56B2F3F6-CFDC-4A10-B36D-98124CD83D96
Another vehicle approaching from behind
GUID-91352549-C581-44A5-8079-C8EA3638803B
SSD1026
The Blind Spot Indicator light illuminates if a vehicle
enters the detection zone from behind in an adjacent
lane.
However, if the overtaking vehicle is traveling much
faster than your vehicle, the indicator light may not
illuminate before the detected vehicle is beside your
vehicle. Always use the side and rear mirrors and turn
and look in the direction your vehicle will move to
ensure it is safe to change lanes.
SSD1031
If the driver activates the turn signal, then the Blind
Spot Indicator light flashes and a chime will sound
twice.
NOTE:
If the driver activates the turn signal before a
vehicle enters the detection zone, the Blind Spot
Indicator light will flash but no chime will sound
when the other vehicle is detected.
Overtaking other vehicles
GUID-32BB934C-0EFB-4E88-94D8-B2B5C81EBD28
SSD1033
The Blind Spot Indicator light illum inates if you
over take a vehicle and that vehicle stays in the
detection zone for approximately 3 seconds.
The camera unit may not det ect slower moving
vehicles if they are passed quickly.
Condition: 'Except for China'/
(295,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
SSD1034
If the driver activates the turn signal while another
vehicle is in the detection zone, then the Blind Spot
Indicator light flashes and a chime will sound twice.
BSW TEMPORARY DISABLED STATUS
GUID-0FE9D3F1-03F8-43CE-BFD8-03D453EFDB97
Under the following condition, the BSW system is
turned off temporarily, the BSW indicator will blink, and
the following message will appear in the v ehicle
information display:
. “Back Door Open”
When the above condition is corrected, the BSW
system will resume automatically.
BSW AUTOMATIC DEACTIVATION
GUID-2603738E-FAAD-45D6-AA7E-7BC65AFF2F97
When dirt, rain or snow accumulates on the camera,
the BSW system will be turned off automatically and
cannot be removed by the automatic washer and
blower. The BSW indicator will blink and the “Not
available Clean Rear Camera” message will appear in
the vehicle information display.
Action to take:
If the message appears, park the vehicle in a safe
place, clean the camera unit with a soft cloth. Then turn
off and restart the engine.
BSW MALFUNCTION
GUID-DC9E6DEC-176C-4D78-A22D-716327A49A92
When the BSW system malfunctions, they will be
turned off automatically, the BSW indicator wi ll
illuminate and the “System fault” message will appear
in the vehicle information display.
Action to take:
Stop the vehicle in a safe location, turn off and restart
the e ngine. If the BSW indicator continues to
illumi nate, have the BSW system chec ked by a
NISSAN dealer.
CAMERA UNIT MAINTENANCE
GUID-DB9BD0F8-43C8-4F10-BC52-E7E5A642BDCB
JVS0393X
The rearview camera unit
*
1
for the BSW system is
located above the rear licence plate. To maintain the
proper operation of the BSW system and help keep
th e system functioning, be sure to observe the
following:
. Always keep the camera unit clean. Be careful not
to damage the nozzle of automatic washer and
blower.
. Do not attach “licence plate accessories” that
reflect light.
. Do not strike or damage the areas around the
camera unit.
GUID-3609F050-5091-4101-96DB-2D85C79F4D76
The Lane Departure Warning (LDW) system helps
alert the driver when the vehicle is traveling close to
either the left or the right of a traveling lane.
JVI0975X
The LDW system uses the multi-sensing front camera
unit situated on the windshield in front of the inside
rearview mirror
*
1
.
WARNING:
. This system is only a warning device to
inform the driver of a potential unintended
lane departure. It will not steer the vehicle or
prevent loss of control. It is the driver’s
responsibility to stay alert, drive safely, keep
the vehicle in the traveling lane, and be in
control of the vehicle at all times.
. The system will not operate at speeds below
approximately 60 km/h (37 MPH) or if it
cannot detect lane markers.
. If the LDW system malfunctions, it will
cancel automatically, and the LDW “System
fault” message will appear in the vehicle
information display.
. If the LDW “System fault” message appears,
pull off the road to a safe location and stop
Starting and driving 5-39
LANE DEPARTURE WARNING (LDW)
SYSTEM (if equipped for Europe)
Condition: 'Except for China'/
(296,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-40 Starting and driving
the vehicle. Turn the engine off and restart
t he engine. If the LDW “System fault”
message continues to appear, h ave the
system checked by a NISSAN dealer.
. Excessive noise will interfere with the warn-
ing chime sound, and the chime may not be
heard.
The system may not function properly under the
following conditions:
. On roads where there are multiple parallel lane
markers; lane markers that are faded or not
painted cl early; yellow painted lane markers;
non-s tandard lane marke rs; or lane ma rkers
covered with water, dirt, snow, etc.
. On roads where the discontinued lane markers are
still detectable.
. On roads where there are sharp curves.
. On roads where there are sharply contrasting
objects, such as shadows, snow, water, wheel
ruts, seams or lines remaining after road repairs.
(The Lane Departure Warning (LDW) syste m
could detect these items as lane markers.)
. On roads where the traveling lane merges or
separates.
. When the vehicle’s traveling direction does not
align with the lane marker.
. When traveling close to the vehicle in front of you,
which obstructs the lane camera unit detection
range.
. When rain, snow or dirt adheres to the windshield
in front of the lane camera unit.
. When the headlights are not bright due to dirt on
the lens or if the aiming is not adjusted properly.
. When strong light enters the lane camera unit.
(For example, the light directly shines on the front
of the vehicle at sunrise or sunset.)
. When a sudden change in brightness occurs. (For
example, when the vehicle enters or exits a tunnel
or under a bridge.)
LDW SYSTEM OPERATION
GUID-5D278735-FB2A-4876-B549-D059C0E4D50E
JVS0439X
SSD0672
LDW indicator (in the Vehicle information display)
The LDW system provides a lane departure warning
function when the vehicle is driven at speeds
approximately 60 km/h (37 MPH) and above.
When the vehicle approaches either the left or the right
side of the traveling lane, a warning chime will sound
and the LDW indicator in the vehicle information
display will blink to alert the driver.
The warning function will stop when the vehicle returns
inside of the lane markers.
The LDW system is not designed to warn under the
following conditions.
. When you operate the lane change signal and
change traveling lanes in the direction of the
signal. (The LDW system will become operable
again approximately 2 seconds after the lane
change signal is turned off.)
. When the vehicle speed lowers to less than
approximately 60 km/h (37 MPH).
After the above conditions have finished and the
necessary operating conditions are satisfied, the LDW
functions will resume.
Turning on or off the LDW system
GUID-32550F0C-0E6C-49C3-92BB-00578BDFA0E5
The LDW system is turned on or off using the settings
menu in the vehicle information display.
SYSTEM ON:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The LDW indicator in the vehicle information display
will appear.
SYSTEM OFF:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The LDW indicator in the vehicle information display
will off.
Perform the following steps to enable or disable the
LDW system.
1. Use the
button until “Settings” displays in the
vehicle information display. Use the
to select
“Driver Assistance”. Then press the ENTER
button.
2. Select “Driving Aids”, and press the E NTER
button.
3. To set the LDW system to on or off, use the
buttons to navigate in the menu and use the
Condition: 'Except for China'/
(297,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
ENTER button to select “Lane” and press the
ENTER button.
TEMPORARY DISABLED STATUS AT HIGH
TEMPERATURE
GUID-67A7ECBE-6ACC-40A7-9D0F-1C44280C8D44
If the vehicle is parked in direct sunlight under high
temperature conditions (over approximately 408C
(1048F) and then started, the LDW system may be
deactivated automatically. The “High cabin tempera-
ture” warning message will appear in the vehicle
information display.
When the interior temperature is reduced, the LDW
system will resume operating automatically.
MULTI-SENSING CAMERA UNIT MAINTE-
NANCE
GUID-C19E3F82-C5BC-4AC8-B54F-DD97FCDDFBCC
JVI0975X
The multi-sensing camera unit
*
1
for the LDW system
is located on the windshield in front of the inside
rearview mirror. To maintain the proper operation of the
LDW system and prevent a system malfunction be sure
to observe the following:
. Always keep the windshield clean.
. Do not attach a sticker (including transparent
material) or install an accessory near the multi-
sensing lane camera unit.
. Do not place reflective materials, such as white
paper or a mirror, on the instrument panel. The
reflection of sunlight may adversely affect the
multi-sensing camera unit’s detection capability.
. Do not strike or damage the areas around the
camera unit. Do not touch the camera lens or
remove the screw located on the camera unit. If
the camera unit is damaged due to an accident,
contact a NISSAN dealer.
GUID-790A193B-4EB1-4E55-89F5-8BFBAFBA326A
The speed limiter allows you to set the desired vehicle
speed limit. While the speed limiter is activated, the
driver can perform normal braking and acceleration,
but the vehicle will not exceed the set speed.
WARNING:
. Always observe posted speed limits. Do not
set the speed over them.
. Always confirm the setting status of the
speed limiter on the vehicle information
display.
When the speed limiter is on, the cruise control system
cannot be operated.
SPEED LIMITER OPERATIONS
GUID-7D727D12-89FC-4770-A277-899333D04B46
The speed limiter can be set at a speed between 30 to
200 km/h (20 to 124 MPH).
JVS0427X
The speed limiter set switches are located on the
steering wheel.
1. CANCEL switch
2. RES/+ switch
3. SET/− switch
4. Cruise control MAIN switch (For details, see
“Cruise control” (P.5-43).)
Starting and driving 5-41
SPEED LIMITER (if equipped)
Condition: 'Except for China'/
(298,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-42 Starting and driving
5. Speed limiter MAIN switch
(When this switch is pushed, the speed limiter
enters the standby mode. If the cruise control
system is on, the system will turn off and the
speed limiter enters the standby mode.)
JVS0284X
The speed limiter operating condition is shown on the
vehicle information display.
1. Speed limiter indicator
2. Set speed indicator
The speed unit can be converted between “km/h” and
“MPH”. (See “Vehicle information display” (P.2-20).)
When the vehicle speed exceeds the set speed limit,
the set speed indicator blinks and the accelerator
pedal operation will not work until the vehicle speed
slows down to the set speed limit.
The speed limiter will not automatically reduce
the vehicle speed to the set speed limit.
Turning on speed limiter
GUID-E36A4E9E-7B02-40E6-850F-CE30FD8CA1A8
Push the speed limiter MAIN switch. The speed limiter
and the set speed indicators illuminate on the vehicle
information display.
Setting speed limit
GUID-2076BDD2-7712-4CD9-9E7B-EA71752B2BC2
1. Push the SET/− switch.
.
When the vehicle is stopped, the speed will be
set at 30 km/h or 20 MPH.
.
While driving, the speed limit will be set at the
current speed.
2. When the speed limit is set, the SET and the set
speed indicators illuminate on the vehicle informa-
tion display.
Changing set speed limit:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Use either of the following operations to change the
speed limit.
. Push and hold the RES/+ or SET/- switch. The set
speed will increase or decrease by approximately
5 km/h or 5 MPH.
. Push, then quickly release the RES/+ or SET/-
switch. Each time you do this, the set speed will
increase or decrease by approximately 1 km/h or 1
MPH.
The new set speed limit value will be displayed in the
vehicle information display.
When the actual vehicle speed exceeds the set speed,
an audible warning will be heard a short time after the
set speed is exceeded if driver intervention is not
detected.
Canceling speed limit
GUID-362F2FDE-38BA-4ECB-9259-8A599BBF4BB9
To cancel the speed limiter, push the CANCEL switch.
The speed limiter indicator and the set speed indicator
on the vehicle information display will turn off.
It is also possible to override the speed limiter by fully
depressing the accelerator pedal beyond the resis-
tance point.
WARNING:
. The vehicle may accelerate when the speed
limiter cancels.
. When additional floor mats are used, be
sure that they are correctly secured and that
they cannot interfere with the accelerator
pedal. Mats not adapted to the vehicle may
prevent proper operation of the speed limit-
er.
Fully depress the accelerator pedal beyond the
resistance point. The speed limiter will be suspended
to allow driving above the set speed. The set speed
indicator will flash. The speed limiter will automatically
resume when the vehicle speed drops below the set
speed limit.
Resuming a previous set speed
GUID-CE513453-A688-4044-BBE7-F0D1927F88CD
If a set speed limit has been cancelled, the set speed
will be stored in the speed limiter memory.
This speed limit can be reactivated by pressing the
RES/+ switch upwards .
If the current vehicle speed is higher than the previous
set speed, the accelerator pedal will not work and the
set speed indicator will flash until the vehicle speed
drops below the set speed limit.
When the actual vehicle speed exceeds the set speed,
an audible warning will be heard a short time after the
Condition: 'Except for China'/
(299,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
set speed is exceeded and driver intervention is not
detected.
Turning the speed limiter off
GUID-60408245-BB35-4F90-884A-83477F15BB08
The speed limiter system will be turned off when one of
the following operations is performed:
. Push the speed limiter MAIN switch. The speed
limiter indicator and the set speed indicator on the
vehicle information display will be turned off.
. Push the cruise control MAIN switch. The speed
limiter information on the vehicle information will
be replaced with the cruise control information.
For details see “Cruise control” (P.5-43).
. When the vehicle is stopped and the ignition is
placed to the off position.
Turning off the speed limiter will erase the set speed
limit memory.
Speed limiter malfunction
GUID-56D8A157-AB4B-4429-9C83-5333E82C8D98
If the speed limiter malfunctions, the speed limiter on
the vehicle information display will flash.
Turn the speed limiter MAIN switch off and have the
system checked by a NISSAN dealer.
T32A130827-FF5B488B-DD40-465E-8AD4-BD88C01B80E9
JVS0180X
Models without speed limiter
JVS0427X
Models with speed limiter
1. CANCEL switch
2. ACCELERATE/RESUME switch
3. COAST/SET switch
4. Cruise control MAIN switch
5. Speed limiter MAIN switch
WARNING:
. Always observe the posted speed limits and
do not set the speed over them.
. Do not use the cruise control when driving
under the following conditions. Doing so
could cause a loss of vehicle control and
result in an accident.
— When it is not possible to keep the
vehicle at a constant speed
— When driving in heavy traffic
— When driving in traffic that varies speed
— When driving in windy areas
— When driving on winding or hilly roads
— When driving on slippery (rain, snow, ice,
etc.) roads
CAUTION:
On manual Transmission (MT) model, do not
shift to the “N” (Neutral) position without
depressing the clutch pedal when the cruise
control is operated. Should this occur, depress
the clutch pedal and turn the cruise control MAIN
switch off immediately. Failure to do so may
cause engine damage.
PRECAUTIONS ON CRUISE CONTROL
T32A130827-DF670F83-9B80-4A99-B18B-04CB9B1ECBD9
. If the cruise control system malfunctions, it will
cancel automatically. The CRUISE indicator in the
vehicle information display will then blink to warn
the driver.
. If the CRUISE indicator blinks, turn the cruise
control MAIN switch off and have the system
checked by a NISSAN dealer.
. The CRUISE indicator may blink when the cruise
control MAIN switch is turned ON while pushing
the ACCELERATE/RESUME, COAST/SE T or
CANCEL switch. To properly set the cruise control
system, perform the following procedures.
Starting and driving 5-43
CRUISE CONTROL (if equipped)
Condition: 'Except for China'/
(300,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-44 Starting and driving
CRUISE CONTROL OPERATIONS
T32A130827-4BD70071-615A-4BE0-8E01-02D3FB02318A
The cruise control allows driving at speeds above 40
km/h (25 MPH) without keeping your foot on the
accelerator pedal.
For gasoline engine models, the cruise control will
automatically be canceled if the vehicle slows down
more than approximately 13 km/h (8 MPH) below the
set speed.
For diesel engine models, the cruise control will
automatically be canceled if the vehicle speed slows
to less than approximately 35 km/h (22 MPH).
Moving the shift lever to the “N” (Neutral) position will
cancel and the CRUISE indicator will off.
Turning on cruise control
T32A130827-D9A26350-0978-4C2D-81F7 -A433A8DD2D61
Push the MAIN switch. The CRUISE indicator in the
vehicle information display will appear.
Setting cruising speed
T32A130827-C830EB0E-975B-4C65-891B-9EDAAA4D8E3E
1. Accelerate to the desired speed.
2. Push the COAST/SET switch and release it.
3. Take your foot off the accelerator pedal.
The vehicle will maintain the set speed.
Passing another vehicle:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Depress the accelerator pedal to accelerate. After
releasing the accelerator pedal, the vehicle will return
to the previously set speed.
The vehicle may not maintain the set speed when
going up or down steep hills. In such cases, drive
without the cruise control.
Resetting to slower speed:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Use any one of the following methods to reset to a
slower speed.
. Lightly tap the foot brake pedal. When the vehicle
reaches the desired speed, push and release the
COAST/SET switch.
. Push and hold the COAST/SET switch. When the
vehicle reaches the desired speed, release the
COAST/SET switch.
. Quickly push and release the COAST/SET switch.
This will reduce the vehicle speed by about 1 km/h
or 1 MPH.
Resetting to faster speed:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Use any one of the following methods to reset to a
faster speed.
. Depress the accelerator pedal. When the vehicle
reaches the desired speed, push and release the
COAST/SET switch.
. Push and hold the ACCELERATE/RESUME
switch. When the vehicle reaches the desired
speed, release the ACCELERATE/RESUME
switch.
. Quickly push and release the ACCELERATE/
RESUME switch. This will increase the vehicle
speed by about 1 km/h or 1 MPH.
Resuming at preset speed:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Push and release the ACCELERATE/RESUME switch.
The vehicle will resume the last set cruising speed
when the vehicle speed is over 40 km/h (25 MPH).
Cancelling cruising speed
T32A130827-D50DF324-B09E-4323-8AC9-35C0187CD15A
Use any one of the following methods to cancel the set
speed.
. Push the CANCEL switch.
. Tap the foot brake pedal.
. Push the cruise control MAIN switch. The CRUISE
indicator will turn off.
Condition: 'Except for China'/
(301,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
GUID-50A61EEE-50E1-49FC-B406-D1735C8B3E99
The forward emergency braking system can assist the
driver when there is a risk of a forward collision with the
vehicle ahead in the travelling lane.
JVS0435X
The forward emergency braking system uses a radar
sensor
*
1
located at the front of the vehicle to
measure the distance to the vehicle ahead in the
travelling lane.
The forward emergency braking system operates at
speeds above approximately 5 km/h (3 MPH).
WARNING:
. The forward emergency braking system is a
supplemental aid to the driver. It is not a
replac ement for the driv er’s attent ion to
traffic conditions or responsibility to drive
safely. It cannot prevent accidents due to
careles sness or dangerous driving tec h-
niques.
. The forward emer gency braking system
do es not function in all dr iving, traffic,
weather and road conditions.
SYSTEM OPERATION
GUID-282EFFD6-A2A3-44A1-9162-36F52A814BFD
The forward emergency braking system will function
when your vehicle is driven at speeds above approxi-
mately 5 km/h (3 MPH).
If a risk of a forward collision is detected, the forward
emergency braking sy stem wi ll provide the first
warning to the driver by flashing the forward emer-
gency braking system warning light and providing an
audible warning.
If the driver applies the brakes quickly and forcefully
after the warning, and the forward emergency braking
system detects that there is still the possibility of a
forward collision, the system will automatically increase
the braking force.
If the driver does n ot take act ion, the forward
emergency braking system issues the second visual
warning (red) and audible warning. If th e driver
releases the accelerator pedal, then the system applies
partial braking.
If the risk of a collision becomes imminent, the forward
emergency braking system applies harder braking
automatically.
NOTE:
The vehicle’s brake lights come on when braking
is performed by the forward emergency braking
system.
Depending on vehicle speed and distance to the
vehicle ahead, as wel l as driving and roadway
conditions, the system may help the driver avoid a
forward collision or may help mitigate the conse-
quences if a collision should one be unavoidable.
If the driver is handling the steering wheel, accelerating
or braking, the forward emergency braking system will
function later or will not function.
The automatic braking will cease under the following
conditions:
. When the steering wheel is turned as far as
necessary to avoid a collision.
. When the accelerator pedal is depressed.
. When there is no longer a vehicle detected ahead.
If the forward emergency braking system has stopped
the vehicle, the vehicle will remain at a standstill for
approximately 2 s econds before the brakes ar e
released.
WARNING:
. The radar sensor does not detect the
following objects:
— Pedestrians, animals or obstacles in the
roadway
— Oncoming vehicles
— Crossing vehicles
. The radar sensor has some performance
limitations. If a stationary vehicle is in the
vehicle’s path, the forward emergency brak-
ing system will not function when the vehicle
is driven at speeds over approximately 80
km/h (50 MPH).
. The radar sensor may not detect a vehicle
ahead in the following conditions:
— Dirt, ice, snow or other material covering
the radar sensor.
— Interference by other radar sources.
— Snow or road spray from travelling
vehicles.
— If the vehicle ahea d is narrow (e.g.
motorcycle).
Starting and driving 5-45
FORWARD EMERGENCY BRAKING
SYSTEM (if equipped)
Condition: 'Except for China'/
(302,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-46 Starting and driving
— When driving on a steep downhill slope
or roads with sharp curves.
— When towing a trailer.
. In some road or traffic condition s, the
fo rward emergency brakin g system may
unexpectedly push the accelerator pedal up
or apply partial braking. When acceleration
is necessary, continue to depress the accel-
erator pedal to override the system.
. Braking distances increase on slippery sur-
faces.
. Excessive noise will interfere with the warn-
ing chime sound, and the chime may not be
heard.
. The system is designed to automaticall y
check the sensor’s functionality, within cer-
tain limitations. The system may not detect
some forms of obstruction of the sensor
area of the front bumper such as ice, snow,
stickers, for example. In these cases, the
system may not be able to warn the driver
properly. Be sure that you check, clean and
clear the sensor area of the front bumper
regularly.
Turning the forward emergency braking sys-
tem ON/OFF
GUID-91AA4E9D-2919-400F-B632-6E30412A721C
Perform the following st eps to turn the forward
emergency braking system ON or OFF.
1. Using the
switches and the ENTER button
on the left side of the steering wheel, select the
Settings menu in the vehicle information display.
(See “Settings” (P.2-21).)
2. Using the
switches and the ENTER button,
navigate to the [Driver Assistance] menu, followed
by the [Driving Aids] menu.
3. In the [Driving Aids] menu, highlight the [Emer-
gency Brake] item and use the ENTER button to
toggle between ON (enabled) or OFF (disabled).
JVS0299X
When the forward emergency braking system is turned
off, the forward emergency braking system warning
light (orange) will illuminate.
System temporarily unavailable
GUID-45042812-084F-4AD4-831C-D92669CF9587
Condition A:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
When the radar sensor picks up interference from
another radar source, making it impossible to detect a
vehicle ahead, the forward emergency braking system
is automatically turned off. The forward emergency
braking system warning light (orange) and the driver
assist system forward indicator (orange) will illuminate.
Action to take:
When the above conditions no longer exist, the
forward emergency braking system will resume auto-
matically.
Condition B:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
When the sensor area of the front bumper is covered
with dirt or obstructed, making it impossible to detect a
vehicle ahead, the forward emergency braking system
is automatically turned off. The forward emergency
braking system warning light (orange) will illuminate
and the “front radar obstruction” warning message will
appear in the vehicle information display.
Action to take:
If the warning light (orange) comes on, park the vehicle
in a safe location and turn the engine off. Check to see
if the sensor area of the front bumper is blocked. If the
sensor area of the front bumper is blocked, remove the
blocking material. Restart the engine. If the warning
light continues to illuminate, have the forward emer-
gency braking system checked by a NISSAN dealer.
System malfunction
GUID-03AB42D0-B4F4-4D8F-9706-47A73CB97E06
If the forward emergency braking system malfunctions,
it will be turned off automatically, a chime will sound,
the forward emergency braking system warning light
(orange) will illuminate and the warning message
[Malfunction] will appear in the vehicle information
display.
Action to take:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
If the warning light (orange) comes on, park the vehicle
in a safe location, turn the engine off and restart the
engine. If the warning light continues to illuminate, have
the forward emergency braking system checked by a
NISSAN dealer.
Condition: 'Except for China'/
(303,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
GUID-7553A2A8-0370-4910-AC88-82CE83F86111
JVS0185X
The ECO mode system helps to enhance the fuel
economy by controlling the engine and CVT operation
automatically to avoid rapid acceleration.
To turn on the ECO mode system, push the ECO
switch. The ECO mode indicator appears on the
meter.
To turn off the ECO mode, push the ECO switch again.
The ECO mode indicator will turn off.
. The ECO mode system cannot be turned off while
the accelerator pedal is depressed even if the
ECO switch is push ed to OFF. Release t he
accelerator pedal to turn off the ECO mode
system.
. The ECO mode system will turn off automatically if
a malfunction occurs in the system.
. Turn off the ECO mode system when acceleration
is required such as when:
— driving with a heavy load of passengers or
cargo in the vehicle
— driving on a steep uphill slope
ECO PEDAL GUIDE FUNCTION
GUID-DDE3E3BA-F896-46E1-926E-74DCB96AEB2E
JVS0201X
Use the ECO Pedal Guide function for improving fuel
economy.
When the ECO Pedal Guide bar is in the green range
*
1
, it indicates that the vehicle is driven within range
of economy drive.
If the ECO Pedal Guide bar is out of the green range, it
indicates that the accelerator pedal is depressed over
the range of economy drive.
The ECO Pedal Guide bar is not displayed when:
. The cruise control system (if equipped) is operat-
ing.
. The vehicle speed is less than approximately 4
km/h (2 MPH).
. The shift lever is in the “P” (Park), “N” (Neutral) or
“R” (Reverse) position.
To ac tiva te or deactivate t he ECO Pedal Guide
function, see “Settings” (P.2-21).
AMBIENT ECO
GUID-9809FFEA-AECE-412F-A92C-66A486882392
JVS0200X
The ambient ECO
*
1
is displayed according to the
accelerator pedal operation, while driving the vehicle in
ECO mode.
The ambient ECO will illuminate in the directions of
*
2
as the driving pattern becomes more ECO friendly.
To activate or de activate the ambient ECO, see
“Settings” (P.2-21).
The ambient ECO is not displayed in the following
conditions
. The vehicle speed is under 10 km/h (6 MPH).
. The shift lever is in the “P” (Park), “N” (Neutral) or
“R” (Reverse) position.
. The cruise control system (if equipped) is operat-
ing.
Starting and driving 5-47
ECO MODE SYSTEM (if equipped)
Condition: 'Except for China'/
(304,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-48 Starting and driving
ECO DRIVE REPORT
GUID-50E23061-A0D4-48FA-B1AB-3D81CC65EBC0
JVI0929X
When the ignition switch is in the OFF position, ECO
management display appears.
*
1
ECO evaluation
*
2
Previous 5 times (History)
*
3
Current fuel economy
*
4
Best fuel economy
The result of ECO evaluation is displayed when the
vehicle is driven for about 10 minutes or more.
*
1
: The more economically you drive, the more
appear.
*
2
: The average fuel economy for the previous 5
times will be displayed.
*
3
: The average fuel economy since the last reset will
be displayed.
*
4
: The best fuel economy of the past history will be
displayed.
GUID-4EA3AC09-F236-4911-80A7-FA5BD8B3C037
WARNING:
. Do not stop or park the vehicle over
flammable material s such as dry grass,
waste paper or rags. They may ignite and
cause a fire.
. Safe parking procedures require that both
the parking brake be applied and the shift
lever placed in the “P” ( Park) position
(Continuously Variable Transmission model)
or the shift lever placed in an appropriate
gear (Manual Transmission model). Failure
to do so could cause the vehicle to move
unexpectedly or roll away and result in an
accident.
. When parking the vehicle, make sure the
shift lever is moved to the “P” (Park)
position. The shift lever cannot be moved
o ut of the “P” (Park) position without
depressing the foot brake pedal (Continu-
ously Variable Transmission model).
. Never leave the engine running while the
vehicle is unattended.
. When parking for an extended period of time
with Stop/Start System or Idling Stop Sys-
tem (if equipped) activated, the engine will
restart automatically. Never leave the vehi-
cle with the ignition switch in the “ON”
position.
. Never leave children or adults who would
normally require the support of others alone
in the vehicle. Pets should not be left alone
either. Th ey could unknowingly activate
switches or controls and inadvertently be-
come involved in a serious accident and
injure themselves. On hot, sunny days,
temperatures in a closed vehicle could
quickly become high enough to cause se-
vere or possibly fatal illness to people and
animals.
PARKING
Condition: 'Except for China'/
(305,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
SSD0488
Left-Hand Drive (LHD) model
SSD0489
Right-Hand Drive (RHD) model
1. Firmly apply the parking brake.
2. Continuously Variable Transmission (CVT) model:
Move the shift lever to the “P” (Park) position.
Manual Transmission (MT) model: Move the shift
lever to the “R” (Reverse) position. When parking
on an uphill grade, move the shift lever to the “1”
(1st) position.
3. To help prevent the vehicle from moving into traffic
when parked on an incline, it is a good practice to
turn the wheels as illustrated.
HEADED DOWNHILL WITH CURB
*
1
Turn the wheels towards the curb and move the
vehicle forward until the curb side wheel gently
touches the curb. Then apply the parking brake.
HEADED UPHILL WITH CURB
*
2
Turn the wheels away from the curb and allow the
vehicle to move back until the curb side wheel
gently touches the curb. Then apply the parking
brake.
HEADED UPHILL OR DOWNHILL, WITHOUT
CURB
*
3
Turn the wheels toward the side of the road so the
vehicle will move away from the center of the road
if the vehicle moves. Then apply the parking brake.
4. Model with Intelligent Key:
Place the ignition switch in the “OFF” position.
Model without Intelligent Key:
Place the ignition switch in the “LOCK” position
and remove the key.
NOTE:
For Model with Stop/Start System or Idling Stop
System:
Use this system when the vehicle is stopped for
a period of time, for example waiting at stop-
lights.
Stop the engine with the ignition switch when
parking, etc. for an extended period of time.
Starting and driving 5-49
Condition: 'Except for China'/
(306,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-50 Starting and driving
GUID-B933B47B-826E-4EDF-9FFF-A382A0D7D08E
SSD0723
Type A
JVS0437X
Type B
The parking sensor (sonar) system sounds a tone to
inform the driver of obstacles near the bumper.
When the “Display” key is ON, the sensor view will
automatically appear in the vehicle information display.
WARNING:
. The parking sensor (sonar) system is a
convenience but it is not a substitute for
proper parking. The driver is always respon-
sible for safety during parking and other
manoeuvres. Always look around and check
that it is safe to do so before parking.
. Read and understand the limitations of the
parking sensor (sonar) system as contained
in this section. The colors of the corner
sensor indicator and the distance guide lines
in the front (if equipped)/rear view indicate
different distances to the object. Inclement
weather or ultrasonic sources such as an
automatic car wash, a truck’s compressed-
air brakes or a pneumatic drill may affect the
function of the system; this may include
reduced performance or a false activation.
. This function is designed as an aid to the
driver in detecting large stationary objects to
help avoid damaging the vehicle. The system
is not designed to prevent contact with small
or moving objects. Always move slowly.
. The system will not detect small objects
below the bumper, and may not detect
objects close to the bumper or on the
ground.
. The system may not detect the following
objects.
— Fluffy objects such as snow, cloth,
cotton, glass-wool, etc.
— Thin objects such as rope, wire and
chain, etc.
— Wedge-shaped objects
. If yo ur vehi cle sustains damage to the
bumper fascia, leaving it misaligned or bent,
the sensing zone may be altered causing
ina ccurate measurement of obstacles or
false alarms.
CAUTION:
. Keep the interior of the vehicle as quiet as
possible to hear the tone clearly.
. Keep the sensors (located on the bumper
fascia) free from snow, ice and large accu-
mulations of dirt. Do not clean the sensors
w ith sharp objects. If the sensors are
covered, the accuracy of the sensor function
will be diminished.
PARKING SENSOR (sonar) SYSTEM
(if equipped)
Condition: 'Except for China'/
(307,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
For the vehicle equipped with rear sensor (Type
A):
The system inform with visual and audible signal of rear
obstacles when the shift lever is in the “R” (Reverse)
position.
The system is deactivated at speeds above 10 km/h (6
MPH). It is reactivated at lower speeds.
The intermittent tone will stop after 3 seconds when an
obstacle is detected by only the corner sensor and the
distance does not change. The tone will stop when the
obstacle get away from the vehicle.
For the vehicle equipped with front and rear
sensor (Type B):
The system inform with visual and audible signal of
front obstacles when the shift lever is in the “D” (Drive)
position and both front and rear obstacles when the
shift lever is in the “R” (Reverse) position.
The system is deactivated at speeds above 10 km/h (6
MPH). It is reactivated at lower speeds.
The intermittent tone will stop after 3 seconds when an
obstacle is detected by only the corner sensor and the
distance does not change. The tone will stop when the
obstacle get away from the vehicle.
JVS0408X
When the corner of the vehicle moves closer to an
object, the corner sensor indicators
*
1
appears (if
equipped).
When the center of the vehicle moves close to an
object, the center sonar indicator
*
2
appears.
When the object is detected, the indicator (green)
appears and blinks and the tone sounds intermittently.
When the vehicle moves closer to the object, the color
of the indicator turns yellow and the rate of the blinking
increase. When the vehicle is very close to the object,
the indicator stops blinking and turns red, and the tone
sounds continuously.
PARKING SENSOR (sonar) SYSTEM OFF
SWITCH (if equipped)
GUID-669F16C6-EACD-47A7-9781-2C30B6CE59DB
Type A:
The ENTER button on the steering-wheel-mounted
controls allows the driver to turn the parking sensor
(sonar) system off.
The parking sensor (sonar) system will turn on
automatically under the following conditions.
. When the ignition switch is placed from the “OFF”
position to the “ON” position.
. When the shift lever is in the “R” (Reverse)
position.
. When the vehicle speed decrease to 10 km/h (6
MPH).
The automatic turning on function can be turned on
and off by “Sensor” key in the setting menu. See
“Driver Assistance” (P.2-21).
Type B:
JVS0438X
The sonar (parking sensor) system OFF switch on the
instrument panel allows the driver to turn the sonar
(parking sensor) system on and off. To turn the sonar
(parking sensor) system on and off, the ignition switch
must be in the “ON” position.
The indicator light
*
1
on the switch will illuminate
when the system is turned on.
If the indicator light flashes when the sonar (parking
sensor) system is not turned off, it may indicate a
malfunction in the sonar (parking sensor) system.
The sonar (parking sensor) system will be turned on
automatically under the following conditions:
. When the ignition switch is switched from the
“OFF” position to the “ON” position.
. When the shift lever is shi fted in to the “R”
(Reverse) position.
. When the vehicle speed increases to 10 km/h (6
MPH) and decreases.
The automatic activation function can be turned on and
off by pushing the switch for more than 4 seconds.
Starting and driving 5-51
Condition: 'Except for China'/
(308,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-52 Starting and driving
PARKING SENSOR (sonar) SYSTEM
SETTING
GUID-82D930BF-66F8-4110-8091-C0957A40D8BB
Moving Object
GUID-276CE6E4-8D55-4D55-BFD8-EAEFD5E089DA
Activate or deactivate the use of sensor.
ON (default) - OFF
Front Sensor (if equipped)
GUID-9B773B27-863A-41FC-A3C0-0ED05513ACCC
Activate or deactivate the use of sensor.
ON (default) - OFF
Rear Sensor
GUID-7531A6E4-9903-4D4C-9F97-CA8222232CC5
Activate or deactivate the use of sensor.
ON (default) - OFF
Display (if equipped)
GUID-4568C52F-E4BD-410C-B505-29984645A465
Automatically shows the sensor view on the vehicle
information display when the sensor is activated.
ON (default) - OFF
Volume
GUID-9F0D0F6F-74CE-4317-BF0A-C293E940631A
Adjust the volume of the tone.
High - Mid (default) - Low
Range
GUID-8F282FF5-3336-4336-8F18-0633E6F6401D
Adjust the detection range of the sensor.
Far - Mid (default) - Near
GUID-0F1C7E08-65B1-4A70-9C77-02D585 3143CA
Your vehicle was designed to be used to carry
passengers and luggage. NISSAN does not recom-
mend trailer towing, because it places additional loads
on your vehicle’s engine, drivetrain, steering, braking,
and other systems.
CAUTION:
Vehicle damage resulting from towing a trailer is
not covered by the warranties.
T32A130827-46EB4C0F-90DC-4650-A446-DF797F692370
Your new vehicle was designed to be used primarily to
carry passengers and luggage.
Towing a trailer will place additional loads on your
vehicle’s engine, drive train, steering, braking and other
systems. The towing of a trailer will exaggerate other
conditions such as sway caused by crosswinds, rough
road surfaces or passing trucks.
Your drivi ng style an d speed must be adjusted
according to the circumstances. Before towing a
trailer, see a NISSAN dealer for an explanation about
the proper use of towing equipment.
OPERATING PRECAUTIONS
T32A130827-9DE592D5-8E38-4B52-9086-50989D3A199E
. Avoid towing a trailer during the break-in period.
. Before driving, make sure that the lighting system
of the trailer works properly.
. Observe the legal maximum speeds for trailer
operation.
. Avoid abrupt starts, accelerations and stops.
. Avoid sharp turns and lane changes.
. Always drive your vehicle at a moderate speed.
. Select the AUTO mode if your vehicle is equipped
with the Four-Wheel Drive (4WD) system.
. Follow the trailer manufacturer’s instructions.
. Choose proper coupling devices (trailer hitch,
safety chain, roof carrier, etc.) for your vehicle and
trailer. These devices are available from a NISSAN
dealer where you can also obtain more detailed
information about trailer towing.
. Never allow the total trailer load (trailer weight plus
its cargo weight) to exceed the maximum set for
the vehicle and the coupling device. See a
NISSAN dealer for more information.
. The trailer must be loaded so that heavy goods are
placed over the axle. The maximum allowable
vertical load on the trailer hitch must not be
TRAILER TOWING (except for
Australia, New Zealand, South
Africa and Europe)
TRAILER TOWING (for Australia,
New Zealand, South Africa and
Europe)
Condition: 'Except for China'/
(309,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
exceeded.
. Have your vehicle serviced more often than at the
interv als specified in a separate maintenance
booklet.
. Trail er towing requires more fuel than under
normal circumstances because of a considerable
increase in traction power and resistance.
While towing a trailer, check the engine coolant
temperat ure indicator to preven t the vehicle
from overheating.
MAXIMUM LOAD LIMITS (for Australia and
New Zealand)
T32A130827-380DA6AB-AE22-433C-A67B-C28A633AE641
CA0011-A
Maximum trailer loads (including tires and other loaded
equipment):
1. Never allow the total trailer load to exceed:
.
The maximum 750 kg (1,654 lb) for a trailer
without brakes.
.
The maximum 1,500 kg (3,308 lb) for a trailer
with brakes (except for R9M engine models
with MT).
.
The maximum 2,000 kg (4,410 lb) for a trailer
with brakes (for R9M engine models with MT).
2. The total trailer load must be lower than the
following three values even if it does not exceed
the maximum permissible trailer loads.
.
Towing capacity displayed on a tow-bar.
.
Trailer’s gross vehicle mass marked on a
coupling body.
.
Gross vehicle mass marked on a trailer data
plate.
The maximum trailer load which can be towed by your
vehicle depends on the towing equipment fitted to the
vehicle. Therefore, it is important to not only have the
correct equipment fitted but also to use it correctly.
Towing loads greater than the value specified for your
vehicle or using towing equipment which is not
provided by NISSAN could seriously affect the
handling and/or performance of your vehicle.
Vehicle damage resulting from improper towing
procedures is not covered by NISSAN warranties.
Information on trailer towing and the required equip-
ment should be obtained from a NISSAN dealer.
Maximum tongue load
T32A130827-AA1923C7-8033-4D1F-87B2-7465D281D9A8
Never allow the tongue load to exceed 10% of the total
trailer load. If the tongue load exceeds 10%, rearrange
the cargo in the trailer.
Maximum rear gross axle weight
T32A130827-B699DB73-6A13-4FD0-982D-10D3DB729848
CA0050
The rear gross axle weight must not exceed the Gross
Axle Weight Rating (GAWR).
Starting and driving 5-53
Condition: 'Except for China'/
(310,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-54 Starting and driving
GAWR
2WD
4WD
MR20 + 6MT QR25 + MCVT R9M + MCVT QR25 + MCVT
R9M + 6MT
Second row [AP-
PROX. kg ( lb )]
Front Rear Front Rear Front Rear Front Rear Front
Rear
990 kg
(2183 lb)
1020 kg
(2249 lb)
1040 kg
(2293 lb)
1030 kg
(2271 lb)
1140 kg
(2514 lb)
1080 kg
(2381 lb)
1060 kg
(2337 lb)
1100 kg
(2426 lb)
1115 kg
(2459 lb)
1150 kg
(2536 lb)
Third row [AP-
PROX. kg ( lb )]
Front Rear Front Rear Front Rear Front Rear Front
Rear
- -
1040 kg
(2293 lb)
1270 kg
(2800 lb)
- - - - -
-
The trailer must be loaded so that heavy goods are
placed over the axle.
Condition: 'Except for China'/
(311,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
TIRE PRESSURE
T32A130827-6E6A486D-D55A-4904-96EF-521252D5ED3D
When towing a trailer, inflate the vehicle tires to the
maximum recommended COLD tire pressure (for full
loading) indicated on the tire placard.
Do not tow a trailer when the vehicle is installed with a
temporary spare tire or a compact spare tire.
SAFETY CHAINS
T32A130827-F1413F77-DE92-4357-AF27-3A61C70932AC
Always use a suitable chain between the vehicle and
trailer. The chain should be crossed and should be
attached to the hitch, not to the vehicle bumper or axle.
Be sure to leave enough slack in the chain to permit
turning corners.
TRAILER BRAKES
T32A130827-E7BCB5DD-CA81-4463-AD3E-C89E64640272
Ensure that trailer brakes are installed as required by
local regulations. Also check th at all other trailer
equipment conforms to local regulations.
Always block the wheels on both the vehicle and trailer
when parking. Apply the hand brake on the trailer if
equipped. Parking on a steep slope is not recom-
mended.
If parking on a steep slope is unavoidable, place the
shift lever in the “P” (Park) position (Continuously
Variable Transmission model) or the shift lever in an
appropriate gear (Manual Transmission model), and
turn the front wheels towards the curb.
TRAILER DETECTION (if equipped)
T32A130827-0C3F3CE1-96A2-4C32-A850-BEDD43D78C58
When towing a trailer with a genuine NISSAN tow bar
electrical kit and the turn signal switch is used, the
electrical system of the vehicle w ill detect the
additional electrical load of the trailer lighting. As a
result, the direction indicator tone will be different.
Starting and driving 5-55
Condition: 'Except for China'/
(312,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-56 Starting and driving
COUPLING DEVICE INSTALLATION (for Europe)
T32A130827-F6FC36CA-3610-4C39-A1C0-EA35EE4654B1
JVS0440X
NISSAN recommends that the coupling device for
trailer towing be installed under the following condi-
tions:
. Maximum permissible vertical load on the coupling
device: 981 N (100 kg, 221 lb)
. The coupling device, mounting points and installa-
tion parts on your vehicle: as shown as an example
in the illustration.
. Rear overhang of coupling device:
*
A
1,080 mm
(42.5 in)
Follow all of the coupling device manufacturer’s
instructions for installation and use.
T32A130827-2BE6C77F-54D5-4EEB-AD11-DE7247EC89B3
WARNING:
. If the engine is not running or is turned off
while driv ing , th e power assist for the
steering will not work. S teerin g will be
harder to operate.
. When the electric power steering warning
light illuminates with the engine running, the
power assist for the steering will cease
operation. You will still have control of the
vehicle, but the steering will be much harder
to operate.
The electric power steering system is designed to
provide power assist while driving to operate the
steering wheel with light force.
When the steering wheel is operated repeatedly or
continuously while parking or driving at a very low
speed, the power assist for the steering wheel will be
reduced. This is to prevent overheating of the electric
power steering system and protect it from getting
damaged. While the power assist is reduced, steering
wheel operation will beco me heavy. When the
temperature of the electric power steering system
goes down, the power assist level will return to normal.
Avoid repeating such steering wheel operations that
could cause the electric power steering system to
overheat.
You may hear a fricative sound when the steering
wheel is operated quickly. However, this is not a
malfunction.
If the electric power steeri ng warnin g light
illuminates while the engine is running, it may indicate
the electric power steering system is not functioning
properly and may need servicing. Have the electric
power steering system checked by a NISSAN dealer.
(See “Electric power steering warning light” (P.2-14).)
ELECTRIC POWER STEERING
SYSTEM
Condition: 'Except for China'/
(313,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
When the electric power st eering warning light
illuminates with the engine running, the power assist
for the steering will cease operation. You will still have
control of the vehicle. However, greater steering effort
is needed, especially in sharp turns and at low speeds.
T32A130827-33A6A8D1-5B12-482B-8640-23F7435A914C
The brake system has two separate hydraulic circuits. If
one circuit malfunctions, you will still have braking
ability at two wheels.
BRAKE PRECAUTIONS
T32A130827-90F02356-5F15-4ED4-99DC-1111D7A143F4
Vacuum assisted brakes
T32A130827-06FB242C-CC82-419B-8F9B-757838B48E62
The brake boost er aids braking by using engine
vacuum. If the engine stops, you can stop the vehicle
by depressing the foot brake pedal. However, greater
foot pressure on the foot brake pedal will be required
to stop the vehicle. The stopping distance will be
longer.
If the engine is not running or is turned off while driving,
the power assisted brakes will not function. Braking
will be harder.
WARNING:
Do not coast with the engine stopped.
Using brakes
T32A130827-7685ABCE-3DB1-41CC-B5B8-18AA17ED1ABA
Avoid resting your foot on the foot brake pedal while
driving. This will overheat the brakes, wear out the
brake linings/pads faster, and increase fuel consump-
tion.
To help reduce brake wear and to prevent the brakes
from overheating, reduce speed and downshift to a
lower gear before going down a slope or long grade.
Overheated brakes may reduce braking performance
and could result in loss of vehicle control.
While driving on a slippery surface, be careful when
braking, accelerating or downshifting. Abrupt braking
or acceleration could cause the wheels to skid and
result in an accident.
Wet brakes
T32A130827-AD58DC9A-3C68-4844-A916-478DBC224255
When the vehicle is washed or driven through water,
the brakes may get wet. As a result, your braking
distance will be longer and the vehicle may pull to one
side during braking.
To dry the brakes, drive the vehicle at a safe speed
while lightly depressing the brake pedal to heat up the
brakes. Do this until the brakes return to normal. Avoid
driving the vehicle at high speeds until the brakes
function correctly.
Parking brake break-in
GUID-4EA5AD91-B89C-4754-AFD4-56CB6178CF59
Break in the parking brake shoes whenever the
stopping effect of the parking brake is weakened or
whenever the parking brake shoes and/or drums/rotors
are replaced, in order to assure the best braking
performance.
This procedure is described in the vehicle service
manual and can be performed by a NISSAN dealer.
Driving uphill
T32A130827-B903C177-351C-4E85-9937-E5FD2194B30C
When starting on a steep grade, it is sometimes
difficult to operate both the brake and clutch (for MT
model). Apply the parking brake to hold the vehicle. Do
not slip the clutch. When ready to start, slowly release
the parking brake while depressing the accelerator
pedal and releasing the clutch pedal.
Driving downhill
T32A130827-BB693F62-5E26-4570-ABA6-532E41F9A9A9
The engine braking action is effective for controlling
the vehicle while descending hills. For Manual Trans-
mission (MT) model, the shift lever should be placed in
the lower speed position prior to descending. For
Continuously Variable Transmission (CVT) model, the
manual shift mode or the “L” position should be
selected.
Starting and driving 5-57
BRAKE SYSTEM
Condition: 'Except for China'/
(314,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-58 Starting and driving
BRAKE ASSIST
GUID-FAF01B0B-7CB4-4828-94D6-A67EB1907396
When the force applied to the brake pedal exceeds a
certain level, the Brake Assist is activated generating
gr eater braking force than a conv entional brake
booster even with light pedal force.
WARNING:
The Brake Assist is only an aid to assist braking
operation and is not a collision warning or
avoidance device. It is the driver’s responsibility
to stay alert, drive safely and be in control of the
vehicle at all times.
ANTI-LOCK BRAKING SYSTEM (ABS)
T32A130827-683C35C0-5BE2-4929-8230-2F12153688C3
WARNING:
. The Anti-lock Braking System (ABS) is a
sophisticated device, but it cannot prevent
accidents resulting from careless or danger-
ous driving techniques. It can help maintain
vehicle control during braking on slippery
surfaces. Remember that stopping distances
on slippery surfaces will be longer than on
normal surfaces even with ABS. Stopping
distances may also be longer on rough,
gravel or snow covered roads, or if you are
using tire chains. Always maintain a safe
distance from the vehicle in front of you.
Ulti mately, the driver is responsible for
safety.
. Tire type and condition may also affec t
braking effectiveness.
— When replacing tires, install the speci-
fied size of tires on all four wheels.
— When installing a spare tire, make sure
that it is the proper size and type as
specified on the tire placard. (See “Tire
placard” (P.9-9).)
— For detailed information, see “Tires and
wheels” (P.8-36).
The Anti-lock Braking System (ABS) controls the
brakes so the wheels do not lock during hard braking
or when braking on slippery surfaces. The system
detects the rotation speed at each wheel and varies
the brake fluid pressure to prevent each wheel from
locking and sliding. By preventing each wheel from
locking, the system helps the driver maintain steering
control and helps to minimize swerving and spinning
on slippery surfaces.
Using system
T32A130827-E23B0C95-6959-4B5D-B45D-1644E60ADE90
Depress the brake pedal and hold it down. Depress
the brake pedal with firm steady pressure, but do not
pump the brakes. The ABS will operate to prevent the
wheels from locking up. Steer the vehicle to avoid
obstacles.
WARNING:
Do not pump the brake pedal. Doing so may
result in increased stopping distances.
Self-test feature
T32A130827-DA8726AA-9312-4804-BB85-3097CB09683D
The ABS includes electronic sensors, electric pumps,
hydraulic solenoids and a computer. The computer has
a built-in diagnostic feature that tests the system each
time you start the engine and move the vehicle at a low
speed in forward or reverse. Whe n the self-test
occurs, you may hear a “clunk” noise and/or feel a
pulsation in the brake pedal. This is normal and does
not indicate a malfunction. If the computer senses a
malfunction, it switches the ABS off and illuminates the
ABS warning light on the meter. The brake system then
operates normally, but without anti-lock assistance.
If the ABS warning light illuminates during the self-test
or while driving, have the vehicle checked by a
NISSAN dealer.
Normal operation
T32A130827-E5A82564-C0DC-4321-8A21-CCD22D746C00
The ABS operates at speeds above 5 to 10 km/h (3 to
6 MPH). The speed varies according to road condi-
tions.
When the ABS senses that one or more wheels are
close to locking up, the actuator rapidly applies and
releases hydraulic pressure. This action is similar to
pumping the brakes very quickly. You may feel a
pulsation in the brake pedal and hear a noise from
under the hood or feel a vibration from the actuator
when it is operating. This is normal and indicates that
the ABS is operating properly. However, the pulsation
may indicate that road conditions are hazardous and
extra care is required while driving.
Condition: 'Except for China'/
(315,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
T32A130827-B5BB8109-3587-4C7A-979E-9F8A81D60F87
When leaving your vehicle unoccupied:
. Always take the key with you - even when leaving
the vehicle in your own garage.
. Close all windows completely and lock all doors.
. Always park your vehicle where it can be seen.
Park in a well lit area during the night.
. If the security system is equipped, use it - even for
a short period.
. Never leave children or pets in the vehicle
unattended.
. Never leave valuables inside the vehicle. Always
take valuables with you.
. Never leave the vehicle documents in the vehicle.
. Never leave articles on a roof rack. Remove them
from the rack and keep and lock them inside the
vehicle.
. Never leave the spare key in the vehicle.
T32A130827-31F5E23F-87C8-4DEE-9E65-020C019B2AB5
WARNING:
. Whatever the condition, drive with caution.
Accelerate and decelerate with great care. If
accelerating or decelerating too fast, the
drive wheels will lose even more traction.
. Allow more stopping distance in cold weath-
er driving. Braking should be started sooner
than on dry pavement.
. Keep at a greater distance from the vehicle
in front of you on slippery roads.
. Wet ice (08C, 328F and freezing rain), very
cold snow and ice can be slick and very
difficult to drive on. The vehicle will have a
lot less traction or grip under these condi-
tions. Try to avoid driving on wet ice until the
road is salted or sanded.
. Watch for slippery spots (glaring ice). These
may appear on an otherwise clear road in
shaded areas. If a patch of ice is seen ahead,
brake before reaching it. Try not to brake
while actually on the ice, and avoid any
sudden steering maneuvers.
. Do not use cruise control on slippery roads.
. Snow can trap dangerous exhaust gas under
your vehicle. Keep snow clear of the exhaust
pipe and from around your vehicle.
BATTERY
T32A130827-BD622040-1F8F-4FB6-8DF8-896F8AF3E925
If the battery is not fully charged during extremely cold
weather conditions, the battery fluid may freeze and
damage the battery. To maintain maximum efficiency,
the battery should be checked regularly. For details,
see “Battery” (P.8-20) of this manual.
ENGINE COOLANT
T32A130827-1902E310-78AC-4591-9565-19BAB071E173
If the vehicle is to be left outside without anti-freeze,
drain the cooling system, including the engine block.
Refill before operating the vehicle. For details, see
“Changing engine coolant” (P.8-9) of this manual.
TIRE EQUIPMENT
T32A130827-77A3E381-71B6-489C-8E41-9907068B0B92
1. If you have snow tires installed on the front/rear
wheels of your vehicle, they should be of the same
size, loading range, construction and type (bias,
bias-belted or radial) as the rear/front tires.
2. If the vehicle is to be operated in severe winter
conditions, snow tires should be installed on all
four wheels.
3. For additional traction on icy roads, studded tires
may be used. However, some countries, provinces
and states prohibit their use. Check local, state
and provincial laws before installing studded tires.
Skid and traction capabilities of studded
snow tires, on wet or dry surfaces, may be
poorer than that of non-studded snow tires.
4. Snow chains may be used if desired. Make sure
they are the proper size for the tires on your
vehicle and are installed according to the chain
manufacturer’s instructions. Use chain tensioners
when recommended by the tire chain manufac-
turer to ensure a tight fit. Loose end links of the tire
chains must be secured or removed to prevent the
possibil ity of whipping actio n damage to the
Starting and driving 5-59
VEHICLE SECURITY COLD WEATHER DRIVING
Condition: 'Except for China'/
(316,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-60 Starting and driving
fenders or underbody. In addition, drive at a
reduced speed, otherwise, your vehicle may be
damaged and/or vehicle handling and perfor-
mance may be adversely affected.
SPECIAL WINTER EQUIPMENT
T32A130827-38F91172-3BF7-430D-9536-3CE83B06974C
It is recommended that the following items be carried
in the vehicle during the winter:
. A scraper and stiff-bristled brush to remove ice
and snow from the windows.
. A sturdy, flat board to be placed under the jack to
give it firm support.
. A shovel to dig the vehicle out of snowdrifts.
PARKING BRAKE
GUID-ED1242F6-0D74-4A0A-8880-253E42ECF77A
When parking in an area where the outside tempera-
ture is below 0 8C (32 8F), do not apply the parking
brake to prevent it from freezing. For safe parking:
. Place the shift lever in the “P” (Park) position (CVT
model).
. Place the shift lever in the “1” (1st) o r “R”
(Reverse) gear (MT model).
. Securely block the wheels.
For models equipped with electronic parking
brake system
GUID-029E85CF-75D0-448C-A695-99F6A63779EC
To keep the electronic parking brake released after the
engine is turned off, see “Parking brake” (P.3-30).
CORROSION PROTECTION
T32A130827-3F1FCB4A-7D59-4318-9831-CEC3E4022DD1
Chemicals used for road surface deicing are extremely
corrosive and will accelerate corrosion and the
deterioration of underbody components such as the
exhaust system, fuel and brake lines, brake cables,
floor pan and fenders.
In the winter, the underbody must be cleaned
periodically. For additional info rmation, see
“Corrosion protection” (P.7-5) of this manual.
For additional protection against rust and corrosion,
which may be required in some areas, consult a
NISSAN dealer.
Condition: 'Except for China'/

Related Topics

Break-in schedule Before starting engine Precautions when starting and driving On-pavement and off-road driving precautions Care when driving Ignition switch (model without intelligent Key system) Push-button ignition switch (model with Intelligent Key system) Starting engine (model without Intelligent Key system) Starting engine (model with Intelligent Key system) Driving vehicle Stop/Start System or Idling Stop System (if equipped) Four-Wheel Drive (4WD) (if equipped) Vehicle Dynamic Control (VDC)/Electronic Stability Program (ESP) system Chassis control Hill start assist system Hill descent control system (if equipped) Blind Spot Warning (BSW)/Lane Departure Warning (LDW) systems (if equipped) Blind Spot Warning (BSW) system (if equipped for Europe) Lane Departure Warning (LDW) system (if equipped for Europe) Speed limiter (if equipped) Cruise control (if equipped) Forward emergency braking system (if equipped) ECO mode system (if equipped) Parking Parking sensor (sonar) system (if equipped) Trailer towing (except for Australia, New Zealand, South Africa and Europe) Trailer towing (for Australia, New Zealand, South Africa and Europe) Electric power steering system Brake system Vehicle security Cold weather driving

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot