2007-2012 Nissan X Trail SUV Starting and driving -> Cruise control (if equipped) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Starting and driving -> Cruise control (if equipped) for Your Nissan X Trail SUV Second Generation (2007-2012)

(299,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
set speed is exceeded and driver intervention is not
detected.
Turning the speed limiter off
GUID-60408245-BB35-4F90-884A-83477F15BB08
The speed limiter system will be turned off when one of
the following operations is performed:
. Push the speed limiter MAIN switch. The speed
limiter indicator and the set speed indicator on the
vehicle information display will be turned off.
. Push the cruise control MAIN switch. The speed
limiter information on the vehicle information will
be replaced with the cruise control information.
For details see “Cruise control” (P.5-43).
. When the vehicle is stopped and the ignition is
placed to the off position.
Turning off the speed limiter will erase the set speed
limit memory.
Speed limiter malfunction
GUID-56D8A157-AB4B-4429-9C83-5333E82C8D98
If the speed limiter malfunctions, the speed limiter on
the vehicle information display will flash.
Turn the speed limiter MAIN switch off and have the
system checked by a NISSAN dealer.
T32A130827-FF5B488B-DD40-465E-8AD4-BD88C01B80E9
JVS0180X
Models without speed limiter
JVS0427X
Models with speed limiter
1. CANCEL switch
2. ACCELERATE/RESUME switch
3. COAST/SET switch
4. Cruise control MAIN switch
5. Speed limiter MAIN switch
WARNING:
. Always observe the posted speed limits and
do not set the speed over them.
. Do not use the cruise control when driving
under the following conditions. Doing so
could cause a loss of vehicle control and
result in an accident.
— When it is not possible to keep the
vehicle at a constant speed
— When driving in heavy traffic
— When driving in traffic that varies speed
— When driving in windy areas
— When driving on winding or hilly roads
— When driving on slippery (rain, snow, ice,
etc.) roads
CAUTION:
On manual Transmission (MT) model, do not
shift to the “N” (Neutral) position without
depressing the clutch pedal when the cruise
control is operated. Should this occur, depress
the clutch pedal and turn the cruise control MAIN
switch off immediately. Failure to do so may
cause engine damage.
PRECAUTIONS ON CRUISE CONTROL
T32A130827-DF670F83-9B80-4A99-B18B-04CB9B1ECBD9
. If the cruise control system malfunctions, it will
cancel automatically. The CRUISE indicator in the
vehicle information display will then blink to warn
the driver.
. If the CRUISE indicator blinks, turn the cruise
control MAIN switch off and have the system
checked by a NISSAN dealer.
. The CRUISE indicator may blink when the cruise
control MAIN switch is turned ON while pushing
the ACCELERATE/RE SUME, COAST/SET or
CANCEL switch. To properly set the cruise control
system, perform the following procedures.
Starting and driving 5-43
CRUISE CONTROL (if equipped)
Condition: 'Except for China'/
(300,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-44 Starting and driving
CRUISE CONTROL OPERATIONS
T32A130827-4BD70071-615A-4BE0-8E01-02D3FB02318A
The cruise control allows driving at speeds above 40
km/h (25 MPH) without keeping your foot on the
accelerator pedal.
For gasoline engine models, the cruise control will
automatically be canceled if the vehicle slows down
more than approximately 13 km/h (8 MPH) below the
set speed.
For diesel engine models, the cruise control will
automatically be canceled if the vehicle speed slows
to less than approximately 35 km/h (22 MPH).
Moving the shift lever to the “N” (Neutral) position will
cancel and the CRUISE indicator will off.
Turning on cruise control
T32A130827-D9A26350-0978-4C2D-81F7-A433A8DD2D61
Push the MAIN switch. The CRUISE indicator in the
vehicle information display will appear.
Setting cruising speed
T32A130827-C830EB0E-975B-4C65-891B-9EDAAA4D8E3E
1. Accelerate to the desired speed.
2. Push the COAST/SET switch and release it.
3. Take your foot off the accelerator pedal.
The vehicle will maintain the set speed.
Passing another vehicle:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Depress the accelerator pedal to accelerate. After
releasing the accelerator pedal, the vehicle will return
to the previously set speed.
The vehicle may not maintain the set speed when
going up or down steep hills. In such cases, drive
without the cruise control.
Resetting to slower speed:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Use any one of the following methods to reset to a
slower speed.
. Lightly tap the foot brake pedal. When the vehicle
reaches the desired speed, push and release the
COAST/SET switch.
. Push and hold the COAST/SET switch. When the
vehicle reaches the desired speed, release the
COAST/SET switch.
. Quickly push and release the COAST/SET switch.
This will reduce the vehicle speed by about 1 km/h
or 1 MPH.
Resetting to faster speed:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Use any one of the following methods to reset to a
faster speed.
. Depress the accelerator pedal. When the vehicle
reaches the desired speed, push and release the
COAST/SET switch.
. Push and h old the ACCELERATE/RESU ME
switch. When the vehicle reaches the desired
speed, release the ACCELERATE/RESUME
switch.
. Quickly push and release the ACCELERATE/
RESUME switch. This will increase the vehicle
speed by about 1 km/h or 1 MPH.
Resuming at preset speed:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Push and release the ACCELERATE/RESUME switch.
The vehicle will resume the last set cruising speed
when the vehicle speed is over 40 km/h (25 MPH).
Cancelling cruising speed
T32A130827-D50DF324-B09E-4323-8AC9-35C0187CD15A
Use any one of the following methods to cancel the set
speed.
. Push the CANCEL switch.
. Tap the foot brake pedal.
. Push the cruise control MAIN switch. The CRUISE
indicator will turn off.
Condition: 'Except for China'/

Related Topics

Popular Owner Manuals