2007-2012 Nissan X Trail SUV Starting and driving -> Ignition switch (model without intelligent Key system) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Starting and driving -> Ignition switch (model without intelligent Key system) for Your Nissan X Trail SUV Second Generation (2007-2012)

(263,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
T32A130827-E3568FA0-1FCD-4E0B-9D9A-62C1D62A8525
Utility vehicles have a significantly higher roll-
over rate than other types of vehicles.
They have higher ground clearance than passenger
cars to make them capable of performing in a wide
variety of on-pavement and off-road applications. This
gives them a higher center of gravity than ordinary cars.
An advantage of higher ground clearance is a better
view of the road, allowing you to anticipate problems.
However, they are not designed for cornering at the
same speeds as conventional passenger cars any
more than low-slung sports cars are designed to
perform satisfactorily under off-road conditions. If at all
possible, avoid sharp turns or abrupt maneuvers,
particularly at high speeds. As with other vehicles of
this type, failure to operate this vehicle correctly may
result in loss of control or vehicle rollover.
CAUTION:
. Do not drive on dry hard surface roads in
LOCK mode.
. Driving on dry hard surface roads in LOCK
mode may cause unnecessary noise and tire
wear. NISSAN recommends driving in the
2WD or AUTO mode under these conditions.
(Four-Wheel Drive (4WD) model)
See “Four-Wheel Drive (4WD)” (P.5-22) for more
details.
T32A130827-FAEDCC51-03A5-46E8-A1B4-05F8A0ACFCB0
Driving your vehicle to fit the circumstances is essential
for your safety and comfort. As a driver, you should be
the one who knows best how to drive in the given
circumstances.
ENGINE COLD START PERIOD
T32A130827-423ABF28-182C-4532-8735-2CF508C400B5
Due to the higher engine speeds, when the engine is
cold, extra caution must be exercised when selecting a
gear during the engine warm-up period after starting
the engine.
LOADING LUGGAGE
T32A130827-F90D098F-7D0F-487B-AF46-661F74A575F1
Loads and their distribution and the attachment of
equipment (coupling devices, roof luggage carriers,
etc.) will considerably change the driving character-
istics of the vehicle. Your driving style and speed must
be adjusted according to the circumstances.
DRIVING IN WET CONDITIONS
T32A130827-9C65E705-D46A-4F87-85ED-94B9DB9A0814
. Avoid accelerating or stopping suddenly.
. Avoid sharp turning or lane changing suddenly.
. Avoid following too close to the vehicle in front.
When water c overs the roa d surface with water
puddles, small water streams, etc., reduce speed to
prevent hydroplaning which can cause skidding and
loss of control. Worn tires will increase this risk.
DRIVING IN WINTER CONDITIONS
T32A130827-707A43BC-7022-449E-80CD-602716C03D25
. Drive cautiously.
. Avoid accelerating or stopping suddenly.
. Avoid sharp turning or lane changing suddenly.
. Avoid sudden steering.
. Avoid following too close to the vehicle in front.
T32A130827-CBF49A8A-33E0-4B19-A0C4-B073BA66DCFD
WARNING:
Never remove the key or place the ignition
switch in the “LOCK” position while driving. The
steering wheel will lock and could cause the
driver to lose control of the vehicle. This could
result in serious vehicle damage or personal
injury.
CONTINUOUSLY VARIABLE TRANSMIS-
SION (CVT)
GUID-605E0183-46DA-4BF9-90EB-D63F97C8E225
JVS0409X
The ignition lock is designed so that the ignition switch
cannot be turned to the “LOCK” position until the shift
lever is moved to the “P” (Park) position. When moving
the ignition switch to the “LOCK” position, to remove
the key from the ignition switch, make sure the shift
lever is in the “P” (Park) position.
When the ignition switch cannot be turned to the
“LOCK” position:
1. Move the shift lever to the “P” (Park) position.
2. Turn the i gnition switch slightly in th e “ON”
direction.
Starting and driving 5-7
ON-PAVEMENT AND OFF-ROAD
DRIVING PRECAUTIONS
CARE WHEN DRIVING
IGNITION SWITCH (model without
intelligent Key system)
Condition: 'Except for China'/
(264,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-8 Starting and driving
3. Place the ignition switch in the “LOCK” position.
4. Remove the key.
If the ignition switch is turned to the “LOCK” position,
the shift lever cannot be moved from the “P” (Park)
position. The shift lever can be moved if the ignition
switch is in the “ON” position with the foot brake pedal
depressed.
The “OFF” position
*
1
is between the “LOCK” and
“ON” positions, although it is not marked on the
ignition switch.
MANUAL TRANSMISSION (MT)
T32A130827-AC9B641D-BD35-4AF4-83C0-7458C9A972F2
JVS0409X
The ignition switch includes a device that helps
prevent accidental removal of the key while driving.
The key can only be removed when the ignition switch
is in the “LOCK” position.
1. Turn the i gnition switch slightly in th e “ON”
direction.
2. Place the ignition switch in the “LOCK” position.
3. Remove the key.
The “OFF” position
*
1
is between the “LOCK” and
“ON” positions, although it is not marked on the
ignition switch.
STEERING LOCK (if equipped)
T32A130827-034768C7-0064-4614-AD37-6617B6EE9A7F
To lock steering wheel
T32A130827-96BC4746-D027-4F2F-BE51-24E0F70F7D7C
1. Place the ignition switch in the “LOCK” position.
2. Remove the key, if it is inserted in the ignition
switch.
3. Turn the steering wheel 1/6 of a turn clockwise
from the straight up position.
To unlock steering wheel
T32A130827-238448DA-E61D-4230-BDC4-765C7822D857
1. Insert the key into the ignition switch.
2. Gently turn the ignition switch while rotating the
steering wheel slightly right and left.
KEY POSITIONS
T32A130827-517E0B80-0FCC-4E32-84E7-A02026650916
LOCK (OFF)/LOCK (ACC) (0)
T32A130827-1EECA44F-6B9C-469F-AD46-0 8410CAFDB59
. The ignition key can only be removed at this
position.
. The steering lock (if equipped) can only be locked
at this position.
. The electrical accessory power activates without
the engine turned on. (ACC position)
OFF/OFF(ACC) (1)
T32A130827-E0306A2A-B0CE-4142-9178-4DC58906EEE1
. The engine is turned off with the steering wheel
unlocked.
. The electrical accessory power activates without
the engine turned on. (ACC position)
ON (2)
T32A130827-99608CE7-C1A4-419A-AB31-5DED98FA480D
The ignition system and the electrical accessory power
activate without the engine turned on.
START (3)
T32A130827-DC8716CC-7528-494E-8851-5E7C1C8FB7AB
The engine starter activates and the engine will start.
The ignition switch, when released, will automatically
turn to the “ON” position.
CAUTION:
As soon as the engine has started, release the
ignition switch immediately.
Condition: 'Except for China'/

Related Topics

Popular Owner Manuals