[ Edit: 2014/ 11/ 7 Model: T32-A ]
SSD0488
Left-Hand Drive (LHD) model
SSD0489
Right-Hand Drive (RHD) model
1. Firmly apply the parking brake.
2. Continuously Variable Transmission (CVT) model:
Move the shift lever to the “P” (Park) position.
Manual Transmission (MT) model: Move the shift
lever to the “R” (Reverse) position. When parking
on an uphill grade, move the shift lever to the “1”
(1st) position.
3. To help prevent the vehicle from moving into traffic
when parked on an incline, it is a good practice to
turn the wheels as illustrated.
HEADED DOWNHILL WITH CURB
*
1
Turn the wheels towards the curb and move the
vehicle forward until the curb side wheel gently
touches the curb. Then apply the parking brake.
HEADED UPHILL WITH CURB
*
2
Turn the wheels away from the curb and allow the
vehicle to move back until the curb side wheel
gently touches the curb. Then apply the parking
brake.
HEADED UPHILL OR DOWNHILL, WITHOUT
CURB
*
3
Turn the wheels toward the side of the road so the
vehicle will move away from the center of the road
if the vehicle moves. Then apply the parking brake.
4. Model with Intelligent Key:
Place the ignition switch in the “OFF” position.
Model without Intelligent Key:
Place the ignition switch in the “LOCK” position
and remove the key.
NOTE:
For Model with Stop/Start System or Idling Stop
System:
Use this system when the vehicle is stopped for
a period of time, for example waiting at stop-
lights.
Stop the engine with the ignition switch when
parking, etc. for an extended period of time.
Starting and driving 5-49
Condition: 'Except for China'/
English 
