2007-2012 Nissan X Trail SUV Starting and driving -> Lane Departure Warning (LDW) system (if equipped for Europe) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Starting and driving -> Lane Departure Warning (LDW) system (if equipped for Europe) for Your Nissan X Trail SUV Second Generation (2007-2012)

(295,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
SSD1034
If the driver activates the turn signal while another
vehicle is in the detection zone, then the Blind Spot
Indicator light flashes and a chime will sound twice.
BSW TEMPORARY DISABLED STATUS
GUID-0FE9D3F1-03F8-43CE-BFD8-03D453EFDB97
Under the following condition, the BSW system is
turned off temporarily, the BSW indicator will blink, and
the following message will appear in the vehicle
information display:
. “Back Door Open”
When the above condition is corrected, the BSW
system will resume automatically.
BSW AUTOMATIC DEACTIVATION
GUID-2603738E-FAAD-45D6-AA7E-7BC65AFF2F97
When dirt, rain or snow accumulates on the camera,
the BSW system will be turned off automatically and
cannot be removed by the automatic washer and
blower. The BSW indicator will blink and the “Not
available Clean Rear Camera” message will appear in
the vehicle information display.
Action to take:
If the message appears, park the vehicle in a safe
place, clean the camera unit with a soft cloth. Then turn
off and restart the engine.
BSW MALFUNCTION
GUID-DC9E6DEC-176C-4D78-A22D-716327A49A92
When the BSW system malfunctions, they will be
turned off automatically, the BSW indicator will
illuminate and the “System fault” message will appear
in the vehicle information display.
Action to take:
Stop the vehicle in a safe location, turn off and restart
the engine. If the BSW indicator continues to
illumi nate, have the B SW system checked by a
NISSAN dealer.
CAMERA UNIT MAINTENANCE
GUID-DB9BD0F8-43C8-4F10-BC52-E7E5A642BDCB
JVS0393X
The rearview camera unit
*
1
for the BSW system is
located above the rear licence plate. To maintain the
proper operation of the BSW system and help keep
th e system functioning, be sure to observe the
following:
. Always keep the camera unit clean. Be careful not
to damage the nozzle of automatic washer and
blower.
. Do not attach “licence plate accessories” that
reflect light.
. Do not strike or damage the areas around the
camera unit.
GUID-3609F050-5091-4101-96DB-2D85C79F4D76
The Lane Departure Warning (LDW) system helps
alert the driver when the vehicle is traveling close to
either the left or the right of a traveling lane.
JVI0975X
The LDW system uses the multi-sensing front camera
unit situated on the windshield in front of the inside
rearview mirror
*
1
.
WARNING:
. This system is only a warning device to
inform the driver of a potential unintended
lane departure. It will not steer the vehicle or
prevent loss of control. It is the driver’s
responsibility to stay alert, drive safely, keep
the vehicle in the traveling lane, and be in
control of the vehicle at all times.
. The system will not operate at speeds below
approximately 60 km/h (37 MPH) or if it
cannot detect lane markers.
. If the LDW system malfunctions, it will
cancel automatically, and the LDW “System
fault” message will appear in the vehicle
information display.
. If the LDW “System fault” message appears,
pull off the road to a safe location and stop
Starting and driving 5-39
LANE DEPARTURE WARNING (LDW)
SYSTEM (if equipped for Europe)
Condition: 'Except for China'/
(296,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-40 Starting and driving
the vehicle. Turn the engine off and restart
t he e ngine. If th e LD W “Sys tem f ault”
message continues t o appear, have t he
system checked by a NISSAN dealer.
. Excessive noise will interfere with the warn-
ing chime sound, and the chime may not be
heard.
The system may not function properly under the
following conditions:
. On roads where there are multiple parallel lane
markers; lane markers that are faded or not
painted clearly; yellow painted lane m arkers;
non-standard lane markers; or lane markers
covered with water, dirt, snow, etc.
. On roads where the discontinued lane markers are
still detectable.
. On roads where there are sharp curves.
. On roads where there are sharply contrasting
objects, such as shadows, snow, water, wheel
ruts, seams or lines remaining after road repairs.
(The Lane Departure Warning (LDW) system
could detect these items as lane markers.)
. On roads where the traveling lane merges or
separates.
. When the vehicle’s traveling direction does not
align with the lane marker.
. When traveling close to the vehicle in front of you,
which obstructs the lane camera unit detection
range.
. When rain, snow or dirt adheres to the windshield
in front of the lane camera unit.
. When the headlights are not bright due to dirt on
the lens or if the aiming is not adjusted properly.
. When strong light enters the lane camera unit.
(For example, the light directly shines on the front
of the vehicle at sunrise or sunset.)
. When a sudden change in brightness occurs. (For
example, when the vehicle enters or exits a tunnel
or under a bridge.)
LDW SYSTEM OPERATION
GUID-5D278735-FB2A-4876-B549-D059C0E4D50E
JVS0439X
SSD0672
LDW indicator (in the Vehicle information display)
The LDW system provides a lane departure warning
function when the vehicle is driven at speeds
approximately 60 km/h (37 MPH) and above.
When the vehicle approaches either the left or the right
side of the traveling lane, a warning chime will sound
and the LDW indicator in the vehicle information
display will blink to alert the driver.
The warning function will stop when the vehicle returns
inside of the lane markers.
The LDW system is not designed to warn under the
following conditions.
. When you operate the lane change signal and
change traveling lanes in the direction of the
signal. (The LDW system will become operable
again approximately 2 seconds after the lane
change signal is turned off.)
. When the vehicle speed lowers to less than
approximately 60 km/h (37 MPH).
After the above conditions have finished and the
necessary operating conditions are satisfied, the LDW
functions will resume.
Turning on or off the LDW system
GUID-32550F0C-0E6C-49C3-92BB-00578BDFA0E5
The LDW system is turned on or off using the settings
menu in the vehicle information display.
SYSTEM ON:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The LDW indicator in the vehicle information display
will appear.
SYSTEM OFF:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The LDW indicator in the vehicle information display
will off.
Perform the following steps to enable or disable the
LDW system.
1. Use the
button until “Settings” displays in the
vehicle information display. Use the
to select
“Driver Assistance”. Then press t he ENTER
button.
2. Select “Driving Aids”, and press the EN TER
button.
3. To set the LDW system to on or off, use the
buttons to navigate in the menu and use the
Condition: 'Except for China'/

Related Topics

Popular Owner Manuals