[ Edit: 2014/ 11/ 7 Model: T32-A ]
5-42 Starting and driving
5. Speed limiter MAIN switch
(When this switch is pushed, the speed limiter
enters the standby mode. If the cruise control
system is on, the system will turn off and the
speed limiter enters the standby mode.)
JVS0284X
The speed limiter operating condition is shown on the
vehicle information display.
1. Speed limiter indicator
2. Set speed indicator
The speed unit can be converted between “km/h” and
“MPH”. (See “Vehicle information display” (P.2-20).)
When the vehicle speed exceeds the set speed limit,
the set speed indicator blinks and the accelerator
pedal operation will not work until the vehicle speed
slows down to the set speed limit.
The speed limiter will not automatically reduce
the vehicle speed to the set speed limit.
Turning on speed limiter
GUID-E36A4E9E-7B02-40E6-850F-CE30FD8CA1A8
Push the speed limiter MAIN switch. The speed limiter
and the set speed indicators illuminate on the vehicle
information display.
Setting speed limit
GUID-2076BDD2-7712-4CD9-9E7B-EA71752B2BC2
1. Push the SET/− switch.
.
When the vehicle is stopped, the speed will be
set at 30 km/h or 20 MPH.
.
While driving, the speed limit will be set at the
current speed.
2. When the speed limit is set, the SET and the set
speed indicators illuminate on the vehicle informa-
tion display.
Changing set speed limit:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Use either of the following operations to change the
speed limit.
. Push and hold the RES/+ or SET/- switch. The set
speed will increase or decrease by approximately
5 km/h or 5 MPH.
. Push, then quickly release the RES/+ or SET/-
switch. Each time you do this, the set speed will
increase or decrease by approximately 1 km/h or 1
MPH.
The new set speed limit value will be displayed in the
vehicle information display.
When the actual vehicle speed exceeds the set speed,
an audible warning will be heard a short time after the
set speed is exceeded if driver intervention is not
detected.
Canceling speed limit
GUID-362F2FDE-38BA-4ECB-9259-8A599BBF4BB9
To cancel the speed limiter, push the CANCEL switch.
The speed limiter indicator and the set speed indicator
on the vehicle information display will turn off.
It is also possible to override the speed limiter by fully
depressing the accelerator pedal beyond the resis-
tance point.
WARNING:
. The vehicle may accelerate when the speed
limiter cancels.
. When additional floor mats are used, be
sure that they are correctly secured and that
they cannot interfere with the accelerator
pedal. Mats not adapted to the vehicle may
prevent proper operation of the speed limit-
er.
Fully depress the accelerator pedal beyo nd the
resistance point. The speed limiter will be suspended
to allow driving above the set speed. The set speed
indicator will flash. The speed limiter will automatically
resume when the vehicle speed drops below the set
speed limit.
Resuming a previous set speed
GUID-CE513453-A688-4044-BBE7-F0D1927F88CD
If a set speed limit has been cancelled, the set speed
will be stored in the speed limiter memory.
This speed limit can be reactivated by pressing the
RES/+ switch upwards .
If the current vehicle speed is higher than the previous
set speed, the accelerator pedal will not work and the
set speed indicator will flash until the vehicle speed
drops below the set speed limit.
When the actual vehicle speed exceeds the set speed,
an audible warning will be heard a short time after the
Condition: 'Except for China'/
English 
