2003-2008 Volkswagen Golf 4 Door FinalDriveandDifferential -> 1.1 Left Flange Shaft Seal, Replacing User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

FinalDriveandDifferential -> 1.1 Left Flange Shaft Seal, Replacing for Your Volkswagen Golf 4 Door Fifth Generation (2003-2008)

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤  
6-Speed Manual Transmission 02Q - Edition 05.2013  
39 – Final Drive and Differential  
1
Flange Shaft Seals, Manual Trans‐  
mission Installed, Replacing for FWD  
Vehicles  
⇒ “1.1 Left Flange Shaft Seal, Replacing”, page 369  
⇒ “1.2 Right Flange Shaft Seal, Replacing”, page 370  
1.1  
Left Flange Shaft Seal, Replacing  
Special tools and workshop equipment required  
♦ Slide Hammer Set - VW771-  
♦ Slide Hammer Set - Hook - VW771/37-  
♦ Seal Installer - Flange Shaft - 3305-  
♦ Torque Wrench 1331 5-50Nm - VAG1331-  
♦ Torque Wrench 1332 40-200Nm - VAG1332-  
♦ Sealing Grease - G 052 128 A1-  
♦ Shop Crane - Drip Tray - VAS6208-  
Removing  
– Remove the left wheel.  
– Remove the noise insulation. Refer to ⇒ Body Exterior; Rep.  
Gr. 50 ; Noise Insulation .  
– Remove the lower section of the left front wheel housing liner  
or the left front wheel housing liner. Refer to ⇒ Body Exterior;  
Rep. Gr. 66 ; Wheel Housing Liner .  
– Remove the left drive axle. Refer to ⇒ Suspension, Wheels,  
Steering; Rep. Gr. 40 ; Drive Axles, Removing and Installing .  
– Place the Drip Tray under the transmission.  
– Remove the flange shaft bolt. To do this, install two bolts into  
the flange and counterhold the flange shaft using a pry bar.  
– Remove the flange shaft with the pressure spring.  
1. Flange Shaft Seals, Manual Transmission Installed, Replacing for FWD Vehicles  
369  
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤  
6-Speed Manual Transmission 02Q - Edition 05.2013  
– Remove flange shaft seal.  
Installing  
– Install the seal all the way in without tilting it.  
– Fill the space between the sealing/dust lip halfway with Seal‐  
ing Grease - G 052 128 A1- .  
– Install the flange shaft.  
– Install flange shaft with a screw and tighten to tightening spec‐  
ification -item 10- ⇒ Item 10 (page 395) .  
– Install the left drive axle. Refer to ⇒ Suspension, Wheels,  
Steering; Rep. Gr. 40 ; Drive Axles, Removing and Installing .  
– Install the lower section of the left front wheel housing liner or  
the left front wheel housing liner. Refer to ⇒ Body Exterior;  
Rep. Gr. 66 ; Wheel Housing Liner .  
– Install the wheel. Refer to ⇒ Suspension, Wheels, Steering;  
Rep. Gr. 44 ; Wheel Installation Tightening Specifications .  
– Check the transmission fluid level. Refer to  
⇒ “8 Transmission Fluid, Checking”, page 192 .  
– Install the noise insulation. Refer to ⇒ Body Exterior; Rep. Gr.  
50 ; Noise Insulation .  
1.2  
Right Flange Shaft Seal, Replacing  
Special tools and workshop equipment required  
♦ Seal Installer - Flange Shaft - 3305-  
♦ Torque Wrench 1331 5-50Nm - VAG1331-  
♦ Shop Crane - Drip Tray - VAS6208-  
♦ Sealing Grease - G 052 128 A1-  
Removing  
– Remove the noise insulation. Refer to ⇒ Body Exterior; Rep.  
Gr. 50 ; Noise Insulation .  
370  
Rep. Gr.39 - Final Drive and Differential  

Related Topics

Popular Owner Manuals