Get Descriptions of work -> Automatic headlight control and static cornering light: checking function Guide for Volkswagen Taigo SUV First Generation (2021-2025)

Polo 2018 ➤, Polo 2022 ➤, Taigo 2022 ➤

Maintenance - Edition 10.2021

– Check lower axle mountings for large cracks, perforating

cracks or cuts in rubber material -arrows-.

– Check axle mountings also for following damage:

♦ Complete separation of rubber and metal parts.

♦ Large play between mounting and suspension link, which

has a considerably negative effect on the function of the

mounting.

Note

♦ Superficial cracks and cuts as well as minor separations of

the rubber element from the metal part do not significantly

affect the operation of the elasto-kinematic mounting and do

not constitute a basis for a complaint.

♦ Damage to the thin rubber skin over cavities due to con‐

struction is also permissible.

♦ Play between bearing and axle component is permissible as

long as there is no negative effect on the function of the

bearing.

4.3

Automatic headlight control and static

cornering light: checking function

Note

The automatic headlight control was formerly called driving light

assist.

•

Vehicle must be in natural daylight.

4. Descriptions of work

Polo 2018 ➤, Polo 2022 ➤, Taigo 2022 ➤

Maintenance - Edition 10.2021

– Switch on ignition.

– Turn light switch -4- to position “Auto” -2-.

The headlights may not light in brightness.

The rain and light sensor is located centrally at top of wind‐

screen -arrow-.

– Switch on ignition.

– Turn light switch -4- to position “Auto” -2-.

– Cover light/rain sensor -arrow- from outside with your hand

or a suitable object.

This measures the light incidence and the headlights are

switched on.

– Turn light switch -4- to position “0” -1- and switch off ignition.

Static cornering light

The static cornering light is integrated in the headlights.

– Start the engine.

– Switch on dipped headlight.

4. Descriptions of work

Polo 2018 ➤, Polo 2022 ➤, Taigo 2022 ➤

Maintenance - Edition 10.2021

– Switch on turn signal.

– Check cornering light.

– Repeat procedure on other side.

4.4

Battery (12V): checking battery termi‐

nal clamps for secure seating

⇒ i4.4.1 n engine compartment: checking battery terminal clamp

for firm seating”, page 49

4.4.1

12 V battery in engine compartment:

checking battery terminal clamp for

firm seating

Special tools and workshop equipment required

♦ Torque wrench

Note

♦ A securely seated battery terminal clamp ensures trouble

free function and long service life of the battery.

♦ When securing terminal clamp, ensure that it is completely

seated on battery terminal.

NOTICE

The battery clamp on the positive terminal is not firmly attach‐

ed.

Potential short circuit or sparks.

– First, always disconnect the battery earth strap from the

battery negative terminal.

– Open cover of heat shield sleeve -4-.

– Check battery -3- for secure seating. If necessary, retighten

bolt -2- to specified torque.

– Open cover -4- over battery negative terminal.

– If fitted, open cover -3- above battery positive terminal.

4. Descriptions of work

Descriptions of work -> Automatic headlight control and static cornering light: checking function for Your Volkswagen Taigo SUV First Generation (2021-2025)

Related Topics

Descriptions of work

Popular Owner Manuals

Latest Owner Manuals