Polo 2018 ➤, Polo 2022 ➤, Taigo 2022 ➤
Maintenance - Edition 10.2021
– Briefly press button -2- once.
After a short time the display switches back to the original dis‐
play.
Resetting service intervals with Active Info Display
The service interval display can only be reset via the service
menu on vehicles with Active Info Display.
– Select information profile “Range” in dash panel insert and
then press and hold OK in multifunction steering wheel for
about 4 seconds.
The service menu appears.
– Using the buttons in the multifunction steering wheel, select
the “Service” menu, follow the instructions in the dash panel
insert and reset the corresponding service.
4.53
Service interval display: recoding
Note
If the display is not as shown in the procedure: ⇒ Operating
instructions for vehicle diagnostic tester
Recoding from flexible to fixed intervals
ODIS Service
– Connect vehicle diagnostic tester ⇒ page 30 .
– Switch on ignition.
– Carry out identification of vehicle.
– Enter task data, or select “Without task”.
– Select “Control units”.
– Select “Dash panel insert”.
– Select “Guided Functions”.
– Select “Change flexible/fixed intervals”.
– Carry out adaptation according to the information of “Guided functions”.
Changing values for maximum distance to be driven (km) until
next oil change service (fixed) during delivery inspection
ODIS Service
– Connect vehicle diagnostic tester ⇒ page 30 .
– Switch on ignition.
– Carry out identification of vehicle.
– Enter task data, or select “Without task”.
– Select “Control units”.
– Select “Dash panel insert”.
– Select “Guided Functions”.
– Select “Oil change service (fixed)”.
– Follow instructions in “Guided functions” mode.
– Reset “-1- Oil change service (fixed)”.
– Follow instructions in “Guided functions” mode.
The current values for maximum distance to be driven (km) until next oil change service are shown in the
display of the vehicle diagnostic tester.
160
4. Descriptions of work
English 
